Microstructure of nickel nanoparticles embedded in carbon films: case study on annealing effect by micromorphology analysis

The presented study is aimed at analyzing the surface texture of amorphous hydrogenated carbon layers containing nickel nanoparticles (Ni‐NPs@a‐C:H) within their structure, which were deposited by Radio Frequency (RF) sputtering and RF‐Plasma Enhanced Chemical Vapor Deposition (RF‐PECVD) methods on glass substrates. Prepared films were then used as research material following their annealing at two different temperatures of 250 °C and 350 °C in an inert argon atmosphere. Series of height samples were taken with the help of atomic force microscopy (AFM) operating in a non‐contact mode and examined in order to determine their fractal characteristics. Raw AFM data were first plane‐fitted to remove the surface bow exhibiting the so‐called residual surface, and then numerically processed to calculate the Areal Autocorrelation Function (AACF), which was later used to compute the Structure Function (SF). The log–log plots of the latter served for calculation of fractal properties of surfaces under investigation, including fractal dimension D, and pseudo‐topothesy K. The analysis of 3‐D surface texture helps to understand their essential characteristics and their implications as well as graphical models and their implementation in computer simulation. Copyright © 2016 John Wiley & Sons, Ltd.     

2‐Methoxynaphthylnaphthoquinone and its solvate: synthesis and structure–properties relationship

Because of their unique visual optic and electronic properties, substituted quinones are commonly used as dyes and pigments; nevertheless, a theoretic background of relationship between the structures and optical properties of such compounds seems to be still undeveloped. Two crystalline forms of 2‐methoxynaphth‐1‐yl‐naphthoquinone (MNQ) have been synthesized and characterized by means X‐ray, NMR, UV–VIS, as well as, MS spectroscopy. The interpretation of intriguing optical properties of two crystalline forms of MNQ, based on detailed spectral and structural characterization, as well as, DFT and MP2 computations clearly connects the conformation of the molecules with their optical and electronic properties. Thus, flatter conformation, stabilized by crystal net force, favours the intense electron density transition from auxochrome to chromophore moiety (which corresponds excitation from HOMO to LUMO), as well as, favours the π‐stacking interaction, that eventually results in colour enhancement. At the same time, small molecules of solvents included into the crystal net allow molecules of arylnaphthoquinones to adopt less rigid conformation what has a dramatic optical outcome. Copyright © 2013 John Wiley & Sons, Ltd.     

The solution existence and convergence analysis for linear and nonlinear differential-operator equations in Banach spaces within the Calogero type projection-algebraic scheme of discrete approximations

The projection-algebraic approach of the Calogero type for discrete approximations of linear and nonlinear differential operator equations in Banach spaces is studied. The solution convergence and realizability properties of the related approximating schemes are analyzed. For the limiting-dense approximating scheme of linear differential operator equations a new convergence theorem is stated. In the case of nonlinear differential operator equations the effective convergence conditions for the approximated solution sets, based on a Leray-Schauder type fixed point theorem, are obtained.     

Reaction field effects on the electronic structure of carbon radical and ionic centers

We examine solvent effects on carbon radical and ionic centers of HCXY by including a self-consistent reaction-field into the AM 1 and MNDO electronic structure models to mimic dielectric effects. We find that such concepts as merostability are principally solvent effects, and that, as expected, molecules with large dipoles or with charge assymmetry are stabilized more by solvent than those with atoms that are more electrically neutral. Of some importance in this study is the finding that conformation is also dependent on solvation and that change in geometry must be considered if an accurate estimate is to be made of energy differences such as those examined in the calculations of merostabilization.     

Melt compounding of polylactide/organoclay: Structure and properties of nanocomposites

A Brabender mixer was used to deagglomerate and disperse organomodified montmorillonite Cloisite® 30B (3 wt %) in polylactide (PLA) matrix to obtain nanocomposite systems. The influence of compounding conditions such as blending time (6.5, 10, 20, and 30 min) and compression molding on the nanostructure of nanocomposites was investigated. Molecular weight changes of the PLA matrices induced by melt compounding were determined. Good rheological behavior of the PLA during melt blending with Cloisite® 30B was observed. Prolongation of the blending process improved homogenization of the nanocomposites with the formation of more intercalated and exfoliated structures as revealed by transmission electron microscopy (TEM) and X‐ray analysis. Some orientation of the silicate nanoplatelets induced by compression molding of the nanocomposites was revealed by TEM. It was found that an increase of dispersion degree of the silicate layers modified pronouncedly the physical properties of nanocomposites through an increase of thermal stability as revealed by the thermogravimetric analysis, a decrease of crystallizability of the PLA matrix during melt‐crystallization and upon heating from the glassy, amorphous state. Rheological properties of the nanocomposites determined during dynamic frequency sweep appeared to be very sensitive to the nanostructure evolution. Moreover, the scanning electron microscopy and light microscopy investigations showed the presence of the micron‐size inorganic contaminations in the nanocomposites originating from organoclay Cloisite® 30B. These inclusions were resistive to deagglomeration during melt processing. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3392–3405, 2006     

Structural manipulation of pyrochlores: Thermal evolution of metastable Gd2(Ti1−yZry)2O7 powders prepared by mechanical milling

The structural and microstructural characteristics of metastable Gd₂(Ti_1−yZr_y)₂O₇ powders prepared by mechanical milling have been studied by a combination of XRD and Raman spectroscopy. Irrespective of their Zr content, as-prepared powder phases present an anion-deficient fluorite-type of structure as opposed to the pyrochlore equilibrium configuration obtained for the same solid solution by other synthetic routes. These fluorites are stable versus thermal activation, at least up to temperatures of 800 °C. For the Ti-rich compositions, thermal treatments at higher temperatures facilitate the rearrangement of the cation and anion substructures and the relaxation of mechanochemically induced defects whereas for compositions with high Zr content, the fluorite crystal structure is retained even at temperatures as high as 1200 °C. Interestingly enough, transient pyrochlores showing a very unusual cation distribution were observed during the thermally induced defect-recovery process.     

Polylactide compositions. II. Correlation between morphology and main properties of PLA/calcium sulfate composites

Starting from calcium sulfate (gypsum) as fermentation by‐product of lactic acid production process, high performance composites have been produced by melt‐blending polylactide (PLA, L/D isomer ratio of 96:4) and β‐anhydrite II (AII) filler, that is, calcium sulfate hemihydrate previously dehydrated at 500 °C. Characterized by attractive mechanical and thermal properties due to good filler dispersion throughout the polyester matrix, these composites are interesting for potential use as biodegradable rigid packaging. Physical characterization of selected composites filled with 20 and 40 wt % AII has been performed and compared to processed unfilled PLA with similar amorphous structure. State of dispersion of the filler particles and interphase characteristic features have been investigated using light microscopy (LM) and scanning electron microscopy (SEM). Addition of AII did not decrease PLA thermal stability as revealed by thermogravimetry analyses (TGA) and allowed reaching a slight increase of PLA crystallizability during melt crystallization and upon heating from the glassy, amorphous state (DSC). It was found by thermomechanical measurements (DMTA) that the AII filler increased pronouncedly storage modulus (E′) of the composites in comparison with PLA in a broad temperature range. The X‐ray investigations showed stable/unchanged crystallographic structure of AII during processing with molten PLA and in the composite system. The notable thermal and mechanical properties of PLA–AII composites are accounted for by the good filler dispersion throughout the polyester matrix confirmed by morphological studies, system stability, and favorable interactions between components. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2770–2780, 2007     

Polylactide (PLA)-CaSO4 composites toughened with low molecular weight and polymeric ester-like plasticizers and related performances

Large amounts of stable β-anhydrite II (AII), a specific type of dehydrated gypsum and a by-product of lactic acid production process, can be melt-blended with bio-sourced and biodegradable polylactide (PLA) to produce economically interesting novel composites with high tensile strength and thermal stability.To enhance their toughness, while preserving an optimal stiffness, selected low molecular weight plasticizers (bis(2-ethylhexyl) adipate and glyceryl triacetate) and polymeric adipates with different molecular weights have been mixed with a specific PLA (l/d isomer ratio of 96/4) and 40 wt% of AII using an internal kneader. Addition of up to 10 wt% plasticizer into these highly filled compositions can trigger a fourfold increase of the impact strength with respect to the compositions without any modifier, cold crystallization properties and a significant decrease of their glass transition temperature. Moreover, these ternary compositions (PLA-AII-plasticizer) are clearly characterized by easier processing, notable thermo-mechanical performances and good filler dispersion. This study represents a new approach in formulating novel melt-processable polyester grades with improved characteristic features using PLA as biodegradable polymer matrix.     

Polylactide compositions. The influence of ageing on the structure, thermal and viscoelastic properties of PLA/calcium sulfate composites

High-performance composites prepared by melt-blending polylactide (PLA, l/d isomer ratio of 96/4) with various amounts of β-anhydrite II (AII), the dehydrated form of calcium sulfate hemihydrate obtained by a specific thermal treatment at 500 °C, have been aged to study the evolution of their physical and mechanical properties with time. The effect of 1-year ageing under ambient conditions (below T_g of PLA) for selected composites, i.e., filled with 20 and 40 wt% AII, was determined and compared to unfilled PLA with the same processing and ageing history. Samples with an initial amorphous PLA matrix, obtained by fast quenching from the melt, were characterized before and during ageing. The changes in physical parameters have been studied using dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and density measurements. Surprisingly, for all the samples, an increase of the storage modulus (E′) was recorded, as a result of ageing. This improvement was ascribed to the reorganization of the PLA structure induced by ageing. The structural reorganization was also reflected by a slight increase of PLA density and changes in thermal behaviour. The X-ray investigations showed unchanged crystallographic structure of AII both during blending with molten PLA and in the composite systems after ageing. The surprising stability of the thermo-mechanical properties of PLA and PLA/AII composites is in agreement with the results of size exclusion chromatography analysis (SEC) which did not show significant changes of PLA molecular weights brought out by ageing.