Solvothermal synthesis of transition metal (iron/copper) and nitrogen co−doped carbon nanomaterials: comparing their peroxidase−like properties

Journal of Nanoparticle Research - Polycrystalline metallic copper nanoparticle samples with the average particle sizes ranging from 53 to 80 nm were controllably prepared by the wet...     

复合电极La-Ni-B的制备及电催化偏硼酸钠的性能

为进一步提高对偏硼酸钠电催化还原的效率,采用化学镀的方法,以铜片为基体,PdCl2乙醇胶体溶液为活化剂,乙醇为化学镀溶剂,制备了稀土复合电极La-Ni-B.并采用XRD、SEM、EDS方法对催化剂进行表征分析,结果表明稀土合金以纳米颗粒的形式附着在基体表面,所得合金膜是非晶态的.通过循环伏安法研究了复合电极La-Ni-B用于电解偏硼酸钠制备硼氢化钠的可行性.以硼氢化钠实际生产量为指标,探讨了直流、脉冲两种不同供电方式、脉冲电流频率、电解时间对电解行为的影响.结果表明稀土镧对电解偏硼酸钠有催化作用,以20 mL镀液制备的复合电极,在脉冲频率阳极时间T1=1 s,阴极时间T2=1 s时,最佳电解时间为4h.复合电极在重复使用3次的情况下,硼氢化钠产量降低15;,催化剂的重复使用性能良好.     

Piezoelectric Actuator Placement Optimization and Active Vibration Control of a Membrane Structure

The placement optimization of piezoelectric actuators and active vibration control of a membrane structure are studied in this paper. The classical linear quadratic regulator controllers are designed to suppress the unwanted vibration. Simulation results indicate that the optimal locations of piezoelectric actuators are affected deeply by the additional mass and stiffness of actuators, the computational efficiency of particle swarm optimizer is higher than that of genetic algorithm for this particular problem, and the control performance of optimally placed actuators is better than that of non-optimally placed actuators.     

Development of an ultra-performance liquid chromatography-electrospray ionization-Orbitrap mass spectrometry method for determination of xanthopurpurin in rat plasma and its application to pharmacokinetic study

A rapid and sensitive method was developed and validated for the quantitative determination of xanthopurpurin (XPP) in rat plasma using ultra-performance liquid chromatography-electrospray ionization-Orbitrap mass spectrometry. XPP inhibits IgE production and prevents peanut-induced anaphylaxis. The XPP and emodin (internal standard) were determined in negative ion mode with m/z 239.0350 → 211.0400 and 269.0455 → 241.0507, respectively. The separation process was achieved using an ACQUITY UPLC HSS T₃ column with acetonitrile and 0.1% formic acid in water (85:15). The linear range was 0.5–100 ng/mL, and the correlation coefficient (r²) was > 0.993. The inter-day and intra-day precision was within an acceptable range of 15%. The extraction recovery and matrix effect were 78.9–87.2% and 94.3–98.5%, respectively. Under different conditions, the XPP was stable in the range of 5.6–10.6%. This method was successfully applied to study the pharmacokinetics of XPP with an oral dose of 10.0 mg/kg and intravenous dose of 2.0 mg/kg in rats. The absolute oral bioavailability of XPP was 4.6%.     

Enantioselective Total Synthesis of Pseudopteroxazole and Ileabethoxazole

Enantioselective total syntheses of pseudopteroxazole ( 1 ) and ileabethoxazole ( 2 ) are presented. The two original stereocenters were constructed in excellent enantioselectivity and good diastereoselectivity through Carreira's asymmetric dual catalytic allylation, which shows potential for accessing diastereoisomers at C2 and C3 of 1 and 2 . Cationic cyclizations of 13 and 24 demonstrated an effective pathway for the construction of the opposite configurations at C1 in 1 and 2 . Additionally, an approach for the introduction of methyl at C4 is a feasible solution for structural modifications at C4 in 1 and 2 .     

Co3+-Rich Na1.95CoP2O7 Phosphates as Efficient Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions in Alkaline Solution

Implementing sustainable energy conversion and storage technologies is highly reliant on crucial oxygen electrocatalysis, such as the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, the pursuit of low cost, energetic efficient and robust bifunctional catalysts for OER and ORR remains a great challenge. Herein, the novel Na-ion-deficient Na_2−xCoP₂O₇ catalysts are proposed to efficiently electrocatalyze OER and ORR in alkaline solution. The engineering of Na-ion deficiency can tune the electronic structure of Co, and thus tailor the intrinsically electrocatalytic performance. Among the sodium cobalt phosphate catalysts, the Na_1.95CoP₂O₇ (NCPO5) catalyst exhibits the lowest ΔE (E_J10,OER−E_J−1,ORR) of only 0.86 V, which favorably outperforms most of the reported non-noble metal catalysts. Moreover, the Na-ion deficiency can stabilize the phase structure and morphology of NCPO5 during the OER and ORR processes. This study highlights the Na-ion deficient Na_2−xCoP₂O₇ as a promising class of low-cost, highly active and robust bifunctional catalysts for OER and ORR.     

Rational Construction of an Exceptionally Stable MOF Catalyst with Metal-Adeninate Vertices toward CO2 Cycloaddition under Mild and Cocatalyst-Free Conditions

CO₂ is considered as the primary greenhouse gas, resulting in a series of serious environmental problems that affect people's life and health. Carbon capture and sequestration has been implemented as one of the most appealing pathways to control and use CO₂. Here, we rationally integrate various functional sites within the confined nanospace of a microporous metal–organic framework (MOF) material, which is constructed by mixed-ligand strategy based on metal-adeninate vertices. It not only exhibits excellent stability but also can efficiently transform CO₂ and epoxides to cyclic carbonates under mild and cocatalyst-free conditions. Additionally, this catalyst shows extraordinary recyclability for the CO₂ cycloaddition reaction.     

Crystal structures of silicon-rich lithium silicides at high pressure

Silicon (Si) is one of the most essential elements, as it is indispensable for modern electronic technology. The standard Si structure at ambient conditions is the cubic diamond structure, and it has an indirect band gap, which prevents it from being considered as a next-generation platform for semiconductor technologies. Therefore, the search for new allotropes of silicon has attracted great attention. Herein, first principles swarm-intelligence structure searches coupled with density-functional theory were performed to explore the stable high-pressure phases of silicon-rich lithium containing compounds, LiSi_x ($x=4\text{–}8$). The LiSi₄ stoichiometry was predicted to be stable, and it was found to assume one of the following space groups, P4/mnc, Cmmm, and C2/m within the pressure range of 0 to 50 GPa. By removing the Li atoms from these compounds, three silicon allotropes were obtained that were metastable at ambient pressures. Our work illustrates how novel silicon allotropes can be predicted using the CALYPSO method.     

Self-Healable Polyelectrolytes with Mechanical Enhancement for Flexible and Durable Supercapacitors

The practical application of advanced personalized electronics is inseparable from flexible, durable, and even self-healable energy storage devices. However, the mechanical and self-healing performance of supercapacitors is still limited at present. Herein, highly transparent, stretchable, and self-healable poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA)/poly(vinyl alcohol) (PVA)/LiCl polyelectrolytes were facilely prepared by one-step radical polymerization. The cooperation of PAMPSA and PVA significantly increased the mechanical and self-healing capacity of the polyelectrolyte, which exhibited superior stretchability of 938 %, stress of 112.68 kPa, good electrical performance (ionic conductivity up to 20.6 mS cm⁻¹), and high healing efficiency of 92.68 % after 24 h. After assembly with polypyrrole-coated single-walled carbon nanotubes, the resulting as-prepared supercapacitor had excellent electrochemical properties with high areal capacitance of 297 mF cm⁻² at 0.5 mA cm⁻² and good rate capability (218 mF cm⁻² at 5 mA cm⁻²). Besides, after cutting in two the supercapacitor recovered 99.2 % of its original specific capacitance after healing for 24 h at room temperature. The results also showed negligible change in the interior contact resistance of the supercapacitor after ten cutting/healing cycles. The present work provides a possible solution for the development of smart and durable energy storage devices with low cost for next-generation intelligent electronics.