含CdS的聚碳酸醋薄膜的光电效应

近来有一些学者从理论或实践上探讨了模拟植物光合作用的光电化学膜体系用于太阳能转换的可能性。这种体系的核心是一个具有光活性的膜,把两个含有氧化还原偶的水溶液分隔开;当膜受光照时在膜里产生电荷(电子和空穴)的分离,电子到膜的一侧引起一个还原反应而空穴到膜的另一侧引起一个氧化反应。本文用一种聚碳酸酯的透明薄膜(商品名Nuclepore membrane),膜上已用中子照射的方法打好了大小和分布都很均匀的大量微孔,然后在这些微孔里形成CdS沉淀。这样得到的光活性膜体系,改性后在光照时能     

Heterocyclic diazo compounds as starting materials in organic synthesis (review)

Data on the structures and reactions of heterocyclic diazo compounds that lead to the formation of new heterocyclic systems as a result of intra- or intermolecular cyclization and rearrangements are systematized.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 579–603, May, 1980.     

Speciation analysis of tellurium by solid-phase extraction in the presence of ammonium pyrrolidine dithiocarbamate and inductively coupled plasma mass spectrometry

Under acidic conditions tellurium(IV) formed a complex with ammonium pyrrolidine dithiocarbamate (APDC). The tellurium(IV) complex was completely retained on a non-polar Isolute silica-based octadecyl (C(18)) sorbent-containing solid-phase extraction (SPE) cartridge, while the uncomplexed Te(VI) passed through the cartridge and remained as a free species in the solution. Only partial Te(IV) was retained on the SPE cartridge for samples without addition of APDC. On the basis of different retention behaviours of the complexed Te(IV) and uncomplexed Te(VI), a simple and highly sensitive method is proposed for the determination of total tellurium and Te(VI) by SPE separation and inductively coupled plasma mass spectrometry (ICP-MS) detection. The Te(IV) concentration was calculated as the difference between total tellurium and Te(VI) concentrations. The detection limit (3 sigma) is 3 ng L(-1) tellurium. Factors affecting the separation and detection of tellurium species were investigated. Coexisting ions did not show significant interferences with the Te(IV)-APDC complex retention and the subsequent ICP-MS detection of Te. The method has been successfully applied to the tellurium speciation analysis in waters with spiked recoveries for Te(IV) and Te(VI) of 86.0-108% and 87.1-97.4%, respectively.     

Antimony speciation by inductively coupled plasma mass spectrometry using solid phase extraction cartridges

A novel and simple method for inorganic antimony speciation is described based on selective solid phase extraction (SPE) separation of antimony(III) and highly sensitive inductively coupled plasma mass spectrometric (ICP-MS) detection of total antimony and antimony(V) in the aqueous phase of the sample. Non-polar SPE cartridges, such as the Isolute silica-based octyl (C8) sorbent-containing cartridge, selectively retained the Sb(III) complex with ammonium pyrrolidine dithiocarbamate (APDC), while the uncomplexed Sb(V) remained as a free species in the solution and passed through the cartridge. The Sb(III) concentration was calculated as the difference between total antimony and Sb(V) concentrations. The detection limit was 1 ng L(-1) antimony. Factors affecting the separation and detection of antimony species were investigated. Acidification of samples led to partial or complete retention of Sb(V) on C8 cartridge. Foreign ions tending to complex with Sb(III) or APDC did not interfere with the retention behavior of the Sb(III)-APDC complex. This method has been successfully applied to antimony speciation of various types of water samples.     

Electrochemically generated super-hydrophilic surfaces

The control of surface wettability of indium tin oxide (In2O3-SnO2) coated glass surfaces is studied. We report here the first observation of purely electrochemical generation of super-hydrophilic surfaces at In2O3-SnO2 electrodes in the absence of an ultraviolet illumination source. This is achieved by the application of high anodic potentials for a prolonged period. Such surfaces are reversibly converted back to their original hydrophobic state on storage in air (one or two days) or water (a week)(and vice versa). The unique character of these surfaces can be attributed to the surface structure of the hydrophilic phase.     

PHOTOSENSITIZATION SYSTEMS OF COVALENTLY LINKED PHTHALOCYANINE COMPLEXES IN BOTH BILAYER LIPID MEMBRANES AND TIN OXIDE PHOTOVOLTAIC CELL

Abstract Zinc phthalolocyanine photosensitized donor-acceptor systems for light energy conversion and for the design of photoelectrochemical molecular devices are presented. Covalently linked phthalocyanine complexes were incorporated in bilayer lipid membranes (BLM) and deposited on SnO₂ transparent electrodes. Their photovoltages were measured and compared. It has been found that a more favorable orientation and closer proximity are attained in the diad compounds between the donor (phthalocyanine)-acceptor (anthraquinone) pair than in the reference compound for efficient light-induced charge separation and transfer. The triad compound is the best among all tested compounds. The decrease in the fluorescence yield and lifetime induced by quinones was examined and the apparent electron-transfer rate constants were calculated.     

Neighbouring group participation in formation of condensed azines. Formation of pyrazolo(3,4-b)pyrazines,isoxazolo(4,5-b)pyrazines and isothiazolo(5,4-b)pyridine

Pyrazine- and pyridinecarboxamidoximes with an amino, potentially tautomeric hydroxy or mercapto group inortho position could be transformed in the appropriate condensed azines. In this manner, representatives of pyrazolo(3,4-b)pyrazine, isoxazolo(4,5-b)pyrazine and isothiazolo(5,4-b)pyridine ring system were synthesized and some transformations investigated.Presented in part at the 8th International Congress of Heterocyclic Chemistry, Graz, 1981.     

Lamination method for the study of interfaces in polymeric thin film transistors

A method for the fabrication of polymeric thin-film transistors (TFTs) by lamination is described. Poly(dimethylsiloxane) stamps were used to delaminate thin films of semiconducting polymers from silicon wafers coated with a self-assembled monolayer (SAM) formed from octyltrichlorosilane. These supported films were laminated onto electrode structures to form coplanar TFTs. The fabrication process was used to make TFTs with poly(3-hexylthiophene), P3HT, and poly[5,5'-bis(3-dodecyl-2-thienyl)-2,2'-bithiophene], PQT-12. TFTs, where these polymers were laminated onto gate dielectrics coated with SAMs from octyltrichlorosilane, had effective field-effect mobilities of 0.03 and 0.005 cm2/(V s), respectively. TFTs where PQT-12 was laminated onto gate dielectrics that were not coated with a SAM also had mobility of 0.03 cm2/(V s). In contrast, TFTs fabricated by spin-coating PQT-12 onto the same structure had mobilities ranging from 10-3 to 10-4 cm2/(V s). These results suggest that the lower mobilities of polymer TFTs made with hydrophilic gate dielectrics are caused by molecular ordering in the semiconducting film rather than electronic effects of dipolar groups at the interface.     

Synthesen in der Pyridazin-Reihe, 26. Mitt.:

Zusammenfassung Es wird über die Synthese von verschiedenen methylsubstituiertens-Triazolo[4,3—b]pyridazinen berichtet. Außerdem wurdens-Triazolo[4,3—b]pyridazin und seine 7-Methyl- und 6-Chlor-Derivate der homolytischen Methylierung unterworfen, die Reaktionsgemische gaschromatographisch auf einzelne Methyl-s-triazolo[4,3—b]pyridazine aufgetrennt und die Verbindungen identifiziert.

---

Syntheses of pyridazines, XXVI: Synthesis and homolytic methylation of s-triazolo[4.3—b]pyridazines

The syntheses of some methyl substituteds-triazolo[4,3—b]-pyridazines are reported.s-Triazolo[4.3—b]pyridazine and its 7-methyl and 6-chloro analogs were submitted to homolytic methylations and the obtained reaction mixtures were separated by gas chromatography into particular components which were then identified.