多种优化试剂显现潮湿纸张表面潜在手印的比较研究

复杂条件下潜在手印的发现及显现提取一直以来是刑事技术领域研究的热点和难点,尤其是潮湿或水中浸泡客体表面的潜在手印,往往因为环境条件的影响而无法使用常规的显现方法。因此,对于这类疑难条件下潜在手印的显现研究成为亟待解决的问题。本文分别对比了尼罗红、尼罗蓝、物理显影液三种可用于潮湿客体表面潜在手印显现的优化试剂,并对其可靠性、灵敏度及使用条件进行了详细的论证分析,为实战工作中疑难条件下潜在手印的显现提出了可靠的处理方法。     

康普顿背散射技术对贮存环电子束诊断及其应用 II贮存环电子束的极化度测量

简单介绍以激光 电子康普顿背散射原理为基础建立的康普顿背散射极化仪,采用它能实时、非破坏性地监测电子束的极化.该项工作可作为上海激光电子γ源(SLEGS)低能γ束应用研究的内容之一.     

Isoscaling in Statistical Sequential Decay Model

A sequential decay model is used to study isoscaling, i.e. the factorization of the isotope ratios from sources of different isospins and sizes over a broad range of excitation energies, into fugacity terms of proton and neutron number, R21（N, Z） = Y2（ N, Z）/Y1（ N, Z） = Cexp（αN -βZ）. It is found that the isoscaling parameters α and β have a strong dependence on the isospin difference of equilibrated source and excitation energy, no significant influence of the source size on α andβ has been observed. It is found that α and β decrease with the excitation energy and are linear functions of 1/T and △（Z/A）2 or△（N/A）2 of the sources. Symmetry energy coefticient Gsym is constrained from the relationship of a and source △（Z/A）2, /3 and source △（N/A）2.     

汽车覆盖件工艺补充面参数化设计方法

工艺补充面设计的合理性,是保证覆盖件成形质量的重要条件。工艺补充曲面设计和修改的便利性,是提高设计效率的重要途径。本文提出了建立可修改特征参数的截面线类型库,用双向NURBS蒙皮法分片生成工艺补充面的方法和流程,开发了相应的参数化设计模块。在此基础上可以快速实现基于用户控制的工艺补充面的参数化设计和修改。通过对汽车某些零件等实际覆盖件生成工艺补充面的数值仿真验证了可行性。     

Investigation of Exotic Structure of the Largely Deformed Nucleus ^23A1 in the Relativistic-Mean-Field Model

A candidate for proton halo nucleus ^23A1 is investigated based on the constrained calculations in the framework of the de[ormed relativistic mean tield (RMF) model with the NL075 parameter set. It is shown by the constrained calculations that the ground state of ^23A1 has a large deformation that corresponds to the prolate shape. With that large deformation, the non-constrained RMF calculation predicts that there appears an inversion between the 2s1/2 [211] and ld5/2 [202] shells. The valence proton of ^23A] is weakly bound and occupies 2s1/2 [211] and ld5/2 [202] with the weights of 56% and 29%, respectively. The calculated RMS radius for matter is in agreement with the experimental one. It is also predicted that the difference between the proton RMS radius and the neutron one is very large, This suggests that there exists a proton hMo in ^23Al.     

A new probe of neutron skin thickness

The correlation between neutron-to-proton yield ratio (R_np) and neutron skin thickness (δ_np) in neutron-rich projectile induced reactions is investigated within the framework of the Isospin-Dependent Quantum Molecular Dynamics (IQMD) model. The density distribution of the Droplet model is embedded in the initialization of the neutron and proton densities in the present IQMD model. By adjusting the diffuseness parameter of neutron density in the Droplet model for the projectile, the relationship between the neutron skin thickness and the corresponding R_np is obtained. The results show strong linear correlation between R_np and δ_np for neutron-rich Ca and Ni isotopes. It is suggested that R_np may be used as an experimental observable to extract δ_np for neutron-rich nuclei, which is very interesting in the study of the nuclear structure of exotic nuclei, the equation of state (EOS) of asymmetric nuclear matter and neutron-rich matter in astrophysics, etc.     

高效液相色谱-电感耦合等离子体质谱法快速测定天然水中无机砷的形态

建立了高效液相色谱-电感耦合等离子体质谱联用技术快速测定天然水中无机As形态的分析方法。采用Capcell PAK C18色谱柱分离As3+和As5+,5 min内可完成色谱分离,缩短了分析时间。在优化条件下,方法检出限可达到0.11μg/L和0.12μg/L,可满足天然水样品中无机砷形态的分析要求。研究了As形态标准溶液在不同保存条件下的形态稳定性问题,确定了无机As形态工作标准溶液和野外天然水样品采集和保存的最佳条件和时间。     

基于同步辐射加速器的康普顿背散射γ光源性质及其应用研究

本文介绍了利用康普顿背散射 (BCS)产生γ射线的原理 ,并以SSRF储存环电子运行参数为例 ,给出了利用BCS方法产生MeV量级γ射线束的计算结果 ,预期该光子束具有高强度、高极化度、单色性、方向性好等优点。同时对国际上已运行和拟建的高能和低能γ束线站的装置和性能作了简要介绍 ,并分别探讨了高能和低能准单色极化γ射线在核物理和核天体物理研究中广泛的应用前景。文中对基于正对以及离轴几何条件下 ,采用直线加速器加速的电子同短脉冲强激光发生Compton/Thomson散射的激光同步辐射源作了初步探讨 ,这一方法为我们构建超短脉冲的高亮度、准单色、可调谐的X γ射线源开辟了一条新途径。     

连续激光辐照对三结砷化镓电池散射光谱的特性影响

太阳能电池作为一种高效的光电转化器,被广泛地应用于光伏发电系统中。激光作为一种高亮度光源辐照电池时,会导致其出现损伤,可利用电池的表面散射光谱特性,对其损伤程度进行判别。通过目标表面散射光谱测量系统,对激光辐照后的三结砷化镓电池散射光谱进行测量,并计算双向反射分布函数(BRDF)。其中测量系统主要由FX 2000和NIR 17型光纤光谱仪组成,针对电池表面的强镜反射特性,在实验中采用了入射角和反射角为30°的测量几何模型。原始三结砷化镓太阳能电池的结构主要包括减反射膜DAR层、顶电池GaInP层、中电池GaAs层和底电池Ge层,其散射光谱特征包括可见光谱段(500～900 nm)的吸收特性及近红外谱段(900～1 200 nm)的类周期振荡特性,在对连续激光辐照损伤后电池的光谱特性进行实验测量后,得到了损伤电池光谱BRDF的变化,并结合基于薄膜干涉理论的电池散射光谱模型,对各膜层损伤后的特征进行了分析。结果表明：DAR层的主要作用是降低光谱反射能量,对光谱曲线的特性影响较小;Ge层对光谱曲线形状基本无影响;电池散射光谱吸收和干涉等特征主要由GaInP层和GaAs层所引起,其中,GaIn...     

建立激光同步辐射源的初步探讨

进行了基于正对以及离轴几何条件下,电子与激光束间Compton / Thomson散射的激光同步辐射源的初步探讨。运用现有的直线加速器技术以及高功率、高重复频率激光器技术可以为构建超短脉冲的高亮度、准单色、可调谐的X和γ射线源开辟一条新途径。