Ultrasound-assisted ozone bleaching of cotton

In this study, the effects of ultrasound on ozone treatment processes for bleaching cotton fabrics were investigated and compared with the conventional hydrogen peroxide bleaching process (60 °C over 90 min). Two ultrasonic + ozone treatments of cotton fabric samples were carried out: (1) ozone in an ultrasonic homogenizer (UH) and (2) ozone in an ultrasonic bath. Ozone dosages, temperature and time variations were determined with both ozone-ultrasonic bleaching processes. Whiteness, yellowness, weight, tensile strength properties, FTIR (ATR) spectra and visual appearance, via scanning electron microscopy of treated cotton fabrics as well as chemical oxygen demand (COD) of bleaching effluents, were investigated. It was concluded that the ozone + UH process, conducted for 30 min at 30 °C, produced closely equivalent values of cotton fabric whiteness and yellowness to the classic peroxide bleaching process, with slightly less weight loss, dramatically less COD in the process effluent (29 mg/l for ozone-UH vs. 4,316 mg/l for classical peroxide treatment), and without causing any adverse and/or detrimental effects on loss of fabric strength or elongation of the cotton fabrics. The ozone-UH process also leads to time and energy savings with much less environmental impact. Consequently, the combination of ozonation plus UH carried out at 30 °C over 30 min can be used successfully for cotton bleaching instead of the classic hydrogen peroxide bleaching process.     

Voltammetry of resazurin at a mercury electrode

Electrochemical behavior of resazurin on HMDE in Britton-Robinson (B-R) buffers (pH 2.0–10.0) was studied using the square-wave voltammetry (SWV), square-wave adsorptive stripping voltammetry (SWAdSV), and cyclic voltammetry (CV) techniques. The voltammogram of resazurin in B-R buffer at pH < 4.0 exhibited two cathodic reduction peaks. The voltammetric peaks were obtained at −0.144 V (reversible) and −1.250 V (irreversible) at pH 3.2, and correspond to the reduction of resorufin to dihydroresorufin and to the catalytic hydrogen wave, respectively. At pH > 4.0, a new irreversible cathodic reduction peak, assigned to the protonation of N-oxide on the phenoxazin ring, was observed. Electrochemical parameters (I _p/E _p, I _p/v, I _p/pH, I _p/t _acc) of the compound were determined. From the voltammetric data, electrochemical reduction mechanisms for all peaks have been suggested. Maximum peak current for the reversible peak was obtained at pH 4.1. A linear relationship between the current and concentration was determined, and also the lowest detection limit was found as 3.25 × 10⁻⁸ mol L⁻¹ and 1.98 × 10⁻¹⁰ mol L⁻¹ for SWV and SWAdSV, respectively.     

Quantum chemical computations of 1,3-phenylenediacetic acid

Molecular geometry, vibrational wavenumbers and gauge including atomic orbital (GIAO) 13C NMR and 1H NMR chemical shift values of 1,3-phenylenediacetic acid (C10H10O4), in the ground state have been calculated by using ab initio Hartree-Fock (HF) and density functional theory (DFT/B3LYP) methods with 6-311++G(d,p) basis set for the first time. Comparison of the observed fundamental vibrational modes of 1,3-phenylenediacetic acid and calculated results by density functional B3LYP and Hartree-Fock methods indicate that B3LYP is superior to the scaled Hartree-Fock approach for quantum chemical studies. Geometric parameters (bond lengths and bond angles) and vibrational wavenumbers obtained by the HF and DFT/B3LYP methods are in good agreement with the experimental data. Furthermore, this is the first time the results of the calculated JCH and JCC coupling constants of the C10H10O4 molecule are presented in this study.     

Quantum chemical computational studies on 5-(4-bromophenylamino)-2-methylsulfanylmethyl-2H-1,2,3-triazol-4-carboxylic acid ethyl ester

The optimized molecular geometry, vibrational frequencies, and gauge including atomic orbital (GIAO) (1)H and (13)C NMR shift values of 5-(4-bromophenylamino)-2-methylsulfanylmethyl-2H-1,2,3-triazol-4-carboxylic acid ethyl ester have been calculated by using Hartree-Fock (HF) and density functional method (DFT/B3LYP) with 6-31G(d), 6-31G(d,p) and LANL2DZ basis sets. The optimized molecular geometric parameters were presented and compared with the data obtained from X-ray diffraction. In order to fit the calculated harmonic wavenumbers to the experimentally observed ones, scaled quantum mechanics force field (SQM FF) methodology was proceeded. Correlation factors between the experimental and calculated (1)H chemical shift values of the title compound in vacuum and in CHCl(3) solution by using the conductor-like screening continuum solvation model (COSMO) were reported. The calculated results showed that the optimized geometry well reproduces the crystal structure. The theoretical vibrational frequencies and chemical shifts are in very good agreement with the experimental data. In solvent media the energetic behavior of the title compound was also examined by using the B3LYP method with the 6-31G(d) basis set, applying the COSMO model. The obtained results indicated that the total energy of the title compound decreases with increasing polarity of the solvent. Furthermore, molecular electrostatic potential (MEP), natural bond orbital (NBO) and frontier molecular orbitals (FMOs) of the title compound were performed by the B3LYP/LANL2DZ method, and also thermodynamic parameters for the title compound were calculated at all the HF and B3LYP levels.     

Simultaneous square-wave voltammetric determination of riboflavin and folic acid in pharmaceutical preparations

The square-wave voltammetric (SWV) behaviour of riboflavin and folic acid was studied at a static mercury drop electrode by square wave voltammetry. In 0.05M KCl (pH 5.89) a cathodic scan gave peaks at — 0.56 and — 0.87 V vs. Ag/AgCl for riboflavin and folic acid, respectively. The reduction peak currents are linearly dependent on the concentration of vitamins. Both vitamins can be simultaneously determined from the same voltammogram. The method proposed for the determination of riboflavin and folic acid in multivitamin tablets is very simple, rapid and does not involve time-consuming separation steps. The average contents of riboflavin and folic acid were found to be 14.8 ± 1.26% and 1.46 ± 2.66%, for tablet A and 9.86 ±1.40% and 1.47 ± 2.0% for tablet B, respectively.     

Molecular structure, spectroscopic properties and DFT calculations of 2-(methylthio)nicotinic acid

The analyses of possible conformations, molecular structures, vibrational and electronic properties of 2-(methylthio)nicotinic acid molecule, C₇H₇NO₂S, with the synonym 2-(methylsulfanyl)nicotinic acid have been first presented theoretically. At the same time, FT-IR and micro-Raman spectra of 2-(methylthio)nicotinic acid were recorded in the regions 400–4000 cm^?1 and 100–4000 cm^?1, respectively. In our calculations, the DFTB3LYP method with 6–311G(d, p) basis set was used to have the structural and spectroscopic data about the mentioned molecule in the ground state and the results obtained were compared with experimental values. Furthermore, gauge invariant atomic orbital (GIAO) ¹H and ¹³C NMR chemical shifts in different solvents, UV-vis TD-DFT calculations, the highest occupied molecular orbitals (HOMO-2, HOMO-1, HOMO), lowest unoccupied molecular orbital (LUMO), molecular electrostatic potantial (MEP) surface, atomic charges and thermodynamic properties of molecule have been theoretically verified and simulated at the mentioned level. The energetic behavior of title molecule in different solvent media was investigated by using DFT/B3LYP method with 6–311G(d, p) basis set in terms of integral equation formalism polarizable continuum model (IEFPCM). In addition, the calculated infrared intensities, Raman activities, reduce masses and force constants of the compound under study have been also reported.     

Exact traveling wave solutions of perturbed nonlinear Schrödinger's equation (NLSE) with Kerr law nonlinearity

By using new solutions of nonlinear partial differential equation, a direct algebraic method is described to construct the exact traveling wave solutions for perturbed nonlinear Schrödinger's equation (NLSE). Exact traveling wave solutions are explicitly obtained by this method.     

MHD natural convection flow and heat transfer in a laterally heated partitioned enclosure

This study looks at MHD natural convection flow and heat transfer in a laterally heated enclosure with an off-centred partition. Governing equations in the form of vorticity–stream function formulation are solved using the polynomial differential quadrature (PDQ) method. Numerical results are obtained for various values of the partition location, Rayleigh, Prandtl and Hartmann numbers. The results indicate that magnetic field significantly suppresses flow, and thus heat transfer, especially for high Rayleigh number values. The results also show that the x-directional magnetic field is more effective in damping convection than the y-directional magnetic field, and the average heat transfer rate decreases with an increase in the distance of the partition from the hot wall. The average heat transfer rate decreases up to 80% if the partition is placed at the midpoint and an x-directional magnetic field is applied. The results also show that flow and heat transfer have little dependence on the Prandtl number.     

Water uptake and dye sorption studies of chemically crosslinked highly swollen novel ternary acrylamide‐based hydrogels including citraconic acid and sodium acrylate

Highly swollen hydrogels made by the polymerization of acrylamide (AAm) with some anionic monomers such as citraconic acid (CITA) and sodium acrylate (SA) were investigated as a function of composition to find materials with swelling and dye sorption properties. Highly swollen AAm/CITA/SA or AAm/SA/CITA hydrogels were prepared by free radical solution polymerization in aqueous solutions of AAm with CITA and SA as co‐monomers and two multifunctional crosslinkers such as ethylene glycol dimethacrylate (EGDMA) and 1,4‐butanediol dimethacrylate (BDMA). Swelling experiments were performed in water at 25°C, gravimetrically. Chemically crosslinked AAm/CITA/SA or AAm/SA/CITA hydrogels were used in experiments on sorption of water‐soluble monovalent cationic dye such as “Nil blue” (Basic Blue 12; BB 12). Equilibrium percentage swelling values of AAm/CITA/SA or AAm/SA/CITA hydrogels were calculated in the range of 1797–22,098%. Some swelling kinetic parameters were found. Diffusion behavior of water was investigated. Water diffusion into the hydrogels was found to be non‐Fickian in character. For sorption of cationic dye, BB 12 into the hydrogels was studied by batch sorption technique at 25°C. AAm/CITA/SA or AAm/SA/CITA hydrogels in the dye solutions showed coloration, whereas AAm hydrogel did not show sorption of any dye from the solution. The sorption capacity of AAm/CITA/SA or AAm/SA/CITA hydrogels was investigated. At the end of the experiments, 21.70–78.91% BB 12 adsorptions were determined. Copyright © 2007 John Wiley & Sons, Ltd.