The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions. The existence of IL pools in the IL/O microemulsion was confirmed by UV/Vis spectroscopic analysis with CoCl2 and methylene blue (MB) as the absorption probes. A constant polarity of the IL pool is observed, even if small amounts of water are added to the microemulsion, thus suggesting that the water molecules are solubilized in the polar outer shell of the microemulsion, as confirmed by FTIR spectra. 1H NMR spectroscopic analysis shows that these water molecules interact with the electronegative oxygen atoms of the oxyethylene (OE) units of TX-100 through hydrogen-bonding interactions, and the electronegative oxygen atoms of the water molecules attract the electropositive imidazolium rings of [bmim][BF4]. Hence, the water molecules are like a glue that stick the IL and OE units more tightly together and thus make the microemulsion system more stable. Considering the unique solubilization behavior of added water molecules, the IL/O microemulsion system may be used as a medium to prepare porous or hollow nanomaterials by hydrolysis reactions.     

Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented.     

A nonionic surfactant-decorated liquid crystal sensor for sensitive and selective detection of proteins

Proteins are responsible for most biochemical events in human body. It is essential to develop sensitive and selective methods for the detection of proteins. In this study, liquid crystal (LC)-based sensor for highly selective and sensitive detection of lysozyme, concanavalin A (Con A), and bovine serum albumin (BSA) was constructed by utilizing the LC interface decorated with a nonionic surfactant, dodecyl β-d-glucopyranoside. A change of the LC optical images from bright to dark appearance was observed after transferring dodecyl β-d-glucopyranoside onto the aqueous/LC interface due to the formation of stable self-assembled surfactant monolayer, regardless of pH and ion concentrations studied in a wide range. The optical images turned back from dark to bright appearance after addition of lysozyme, Con A and BSA, respectively. Noteworthy is that these proteins can be further distinguished by adding enzyme inhibitors and controlling incubation temperature of the protein solutions based on three different interaction mechanisms between proteins and dodecyl β-d-glucopyranoside, viz. enzymatic hydrolysis, specific saccharide binding, and physical absorption. The LC-based sensor decorated with dodecyl β-d-glucopyranoside shows high sensitivity for protein detection. The limit of detection (LOD) for lysozyme, Con A and BSA reaches around 0.1 μg/mL, 0.01 μg/mL and 0.001 μg/mL, respectively. These results might provide new insights into increasing selectivity and sensitivity of LC-based sensors for the detection of proteins.     

Studies on the micropolarities of bmimBF4/TX-100/toluene ionic liquid microemulsions and their behaviors characterized by UV-visible spectroscopy

Ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), were substituted for polar water and formed nonaqueous microemulsions with toluene by the aid of nonionic surfactant TX-100. The phase behavior of the ternary system was investigated, and microregions of bmimBF4-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF4 (O/IL) were identified by traditional electrical conductivity measurements. Dynamic light scattering (DLS) revealed the formation of the IL microemulsions. The micropolarities of the IL/O microemulsions were investigated by the UV-vis spectroscopy using the methyl orange (MO) and methylene blue (MB) as absorption probes. The results indicated that the polarity of the IL/O microemulsion increased only before the IL pools were formed, whereas a relatively fixed polar microenvironment was obtained in the IL pools of the microemulsions. Moreover, UV-vis spectroscopy has also shown that ionic salt compounds such as Ni(NO3)2, CoCl2, CuCl2, and biochemical reagent riboflavin could be solubilized into the IL/O microemulsion droplets, indicating that the IL/O microemulsions have potential application in the production of metallic or semiconductor nanomaterials, and in biological extractions or as solvents for enzymatic reactions. The IL/O microemulsions may have some expected effects due to the unique features of ILs and microemulsions.     

Aggregation behavior of long-chain N-aryl imidazolium bromide in aqueous solution

The aggregation behavior of three long-chain N-aryl imidazolium ionic liquids (ILs), 1-(2,4,6-trimethylphenyl)-3-alkylimidazolium bromide [C(n)pim]Br (n = 10, 12, and 14), in aqueous solutions was systematically explored by surface tension, electrical conductivity, and (1)H NMR. A lower critical micelle concentration (cmc) for the N-aryl imidazolium ILs is observed compared with that for 1,3-dialkylimidazolium ILs [C(n)mim]Br, indicating that the incorporation of the 2,4,6-trimethylphenyl group into a headgroup favors micellization. The enhanced π-π interactions among the adjacent 2,4,6-trimethylphenyl groups weaken the steric hindrance of headgroups and thus lead to a dense arrangement of [C(n)pim]Br molecules at the air-water interface. An analysis of the (1)H NMR spectra revealed that the introduced 2,4,6-trimethylphenyl group may slightly bend into the hydrophobic regions upon micellization. The micelle formation process for [C(n)pim]Br (n = 10, 12, and 14) was found to be enthalpy-driven in the investigated temperature range, which is attributed to the strong electrostatic self-repulsion of the headgroups and the counterions as well as the π-π interactions among headgroups. Strong, stable fluorescence properties are presented by the new N-aryl imidazolium ILs, indicating their potential application in the field of photochemistry.     

Aggregation behavior of polyoxyethylene (20) sorbitan monolaurate (tween 20) in imidazolium based ionic liquids

Surface tension measurements were carried out for the solutions of polyoxyethylene (20) sorbitan monolaurate (Tween 20) in 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF 4) and hexafluorophosphate (bmimPF 6) at various temperatures. Two transition points were found in the surface tension-concentration curves at each temperature. The freeze-fracture transmission electron microscopy revealed that two kinds of particles with different sizes are formed at the concentrations of each transition point. Thus, the surfactant concentrations of the two transition points are regarded as critical aggregation concentrations, CAC 1 and CAC 2. From the CAC values and their temperature dependence, we estimated the thermodynamic parameters of the aggregate formation, Delta G agg (0), Delta H agg (0), and Delta S agg (0). The thermodynamic parameters related to CAC 1 are almost independent of temperature. On the other hand, as for the aggregate formation at CAC 2, a positiveDelta S agg (0) contributes to a negative Delta G agg (0) at low temperature, while a negative Delta H agg (0) contributes to a negative Delta G agg (0) at high temperature. The behavior of the thermodynamic parameters as a function of temperature, combined with the variation of (1)H NMR chemical shifts of the bmim (+) protons as a function of the surfactant concentration, demonstrated that the aggregates formed at CAC 1 are nanodroplets of Tween 20 segregated from the solution phase, while those formed at CAC 2 are similar to the usual surfactant micelles formed in aqueous solution.     

ZrO2 Nanoparticles Synthesized using Ionic Liquid Microemulsion

The water‐in‐ionic liquid (W/IL) microemulsion has been used to prepare the tetragonal ZrO₂ nanoparticles. A number of anomalous spherical dispersed particles have been obtained. However, the ZrO₂ nanoparticles synthesized using traditional water‐in‐xylene (W/O) microemulsion show an obvious fusion trace, indicating that the congregation takes place when the precursor was calcined. High thermostable ionic liquid may act as a protector to prevent the congregation of product. The samples are further characterized by XRD, SEM, TEM, and UV‐Vis spectroscopy. The results suggest that the obtained product has high degree of crystallinity and a narrow size distribution (15–40 nm). The XRD pattern has indicated a typical tetragonal crystal structure of ZrO₂. Moreover, the UV‐Vis absorption of the samples also shows the otential advantage in an application of screening ultraviolet radiation.     

Nondestructive Quantification of Foliar Chlorophyll in an Apple Orchard by Visible/Near-Infrared Reflectance Spectroscopy and Partial Least Squares

Chlorophylls respond rapidly to the current physiological status of a tree and reflect nutrient availability. Visible/near-infrared spectroscopy was attempted to determine foliar chlorophyll content in an apple orchard. Backward interval partial least squares and genetic algorithms were sequentially applied to select an optimized spectral interval and an optimized combination of spectral regions selected from informative regions in model calibration. Backward interval partial least squares was used to remove the noninformative regions, which significantly reduced the number of variables. The subsequent application of genetic algorithms-partial least squares to this reduced domain could lead to an efficient and refined model. The performance of the final model was back-evaluated according to root mean square error of calibration (RMSEC) and the correlation coefficient (R _c ) in the calibration set, and was then tested by root mean square error of prediction (RMSEP) and the correlation coefficient (R _p ) in the prediction set. The optimal backward interval partial least squares-genetic algorithms model was obtained with 5 partial least squares factors with 3 spectral regions and 71 variables selected. The measurement results of the final model were achieved as follows: RMSEC = 0.26, R _c  = 0.91 in the calibration set; and RMSEP = 0.22, R _p  = 0.91 in the prediction set. This experiment showed that visible/near-infrared spectroscopy and backward interval partial least squares-genetic algorithms are useful tools for nondestructively assessing foliar chlorophyll content and may have potential application for field assessments in decision-making and operational fertilizer management programs for apple orchards.     

THE INFLUENCE OF THE NEW TECHNOLOGY OF FIXED SURFACE PERFORATION ON CASING STRENGTH1)

用于非常规储层的定面射孔工艺可有效地降低水力裂缝的起裂压力,提高近井筒的泄油面积;但该工艺对套管强度的影响研究较少。本文基于流固耦合理论,建立了地层$\!$-$\!$-$\!$水泥环$\!$-$\!$-$\!$射孔套管的应力耦合模型,退化为裸套管与API标准进行比对,效验了模型,并发现地层约束条件下套管承受内压的能力提高了1.48$\sim$2.16倍,在此基础上,给出了套管尺寸、射孔直径及射孔相位角对套管承压能力的变化规律。计算表明：螺旋射孔方位角为45$^\circ$时,定面射孔间夹角为30$^\circ$时,套管内径越小,套管壁厚越厚,则套管的承压能力越高;相同参数下,定面射孔工艺比螺旋射孔工艺引起的套管承压能力略低。