排序方式: 共有24条查询结果,搜索用时 109 毫秒
2.
在真空或惰性气体中制备的硅量子点发光很弱,硅量子点表面被氢较好钝化后的发光也不强.硅量子点表面的硅氧键或硅氮键能破坏这种钝化并在带隙中形成局域电子态,在局域电子态对应的激活中心有很强的发光.可以用这种方式构建发光物质,控制硅量子点表面的键合可获得不同波长的发光.在硅量子点的发光激活处理过程中,退火是很重要的环节.对于硅量子点发光激活的机理,本文给出了相应的物理模型.实验证明,在600和700 nm波长附近观察到了激活硅量子点的受激发光,在1500 nm到1600 nm波长范围观察到了激活硅量子点的较强发光. 相似文献
3.
Some kinds of low-dimensional nanostructures can be formed by irradiation of laser on the pure silicon sample and the SiGe alloy sample. This paper has studied the photoluminescence (PL) of the hole-net structure of silicon and the porous structure of SiGe where the PL intensity at 706nm and 725nm wavelength increases obviously. The effect of intensity-enhancing in the PL peaks cannot be explained within the quantum confinement alone. A mechanism for increasing PL emission in the above structures is proposed, in which the trap states of the interface between SiO2 and nanocrystal play an important role. 相似文献
4.
用纳秒强激光脉冲制备了纳米硅和硅表面的硅镱键合结构,检测了纳米硅表面硅镱键合的发光特性,并对这种结构相应的光致发光(PL)和电致发光(EL)的动力学机理进行了研究。观察到纳米硅表面硅镱键合在700nm附近尖锐的强发光峰,结合第一性原理计算认为是硅镱键合在弯曲纳米硅表面的局域态发光;利用纳秒脉冲激光沉积技术(PLD)制备多晶硅薄膜,发现由硅镱界面的失配形成表面的突触,其上的硅镱键合产生带隙中的电子局域态,该局域态发光分布在1250~1650nm波长范围,有增强的EL发光;用PLD方法制备硅镱多层膜量子级联结构,测量到光通信窗口的多个发光峰,并观察到随膜层数增加且发光峰增多。 相似文献
5.
纳米硅结构使能带的带隙展宽,并形成准直接能带带隙结构.弯曲表面上的某些键合可以在带隙中产生局域电子态,计算表明:纳米硅弯曲表面上的Si-N,Si=O和Si-O-Si键合能够分别在带隙中2.02 eV,1.78 eV和2.03 eV附近形成局域态子带,对应了实验光致荧光谱(PL)中605 nm处的LN线、693 nm处的LO1线和604 nm处的LO2线特征发光.特别是,Si-Yb键合在纳米硅弯曲表面上可以将发光波长调控到光通信窗口,在1310 nm到1600 nm范围形成LYb线特征发光. 相似文献
6.
7.
Stimulated photoluminescence emission and trap states in Si/SiO2 interface formed by irradiation of laser 下载免费PDF全文
Stimulated photoluminescence (PL) emission has been observed from an oxide structure of silicon when optically excited by a radiation of 514nm laser. Sharp twin peaks at 694 and 692nm are dominated by stimulated emission, which can be demonstrated by its threshold behaviour and linear transition of emission intensity as a function of pump power. The oxide structure is formed by laser irradiation on silicon and its annealing treatment. A model for explaining the stimulated emission is proposed, in which the trap states of the interface between an oxide of silicon and porous nanocrystal play an important role. 相似文献
8.
在纳米晶体硅制备的过程中, 晶化处理是影响和提高纳米硅发光效率的重要制备环节. 热退火、激光退火和电子束辐照是使纳米硅样品晶化的不同方式. 实验表明: 选取适当的晶化方式和参量对制备纳米硅晶体结构至关重要, 特别是在制备硅量子点和量子面的过程中控制好参量, 可以得到较高的发光效率. 有趣的是, 在实验中发现: 当晶化时间较短(如低于20 min)时, 可以获得较好的纳晶硅结构(如量子点结构), 对应于较好的纳晶硅光致发光(PL)和掺杂局域态发光; 当晶化时间较长(如超过30 min)时, 纳米晶体硅结构被破坏, 致使PL谱逐渐减弱与消失. 结合热退火、激光退火和电子束辐照对纳米硅晶化过程, 本文建立起晶化时间对纳米硅局域态发光影响机理的物理模型, 解释了晶化时间对纳米硅局域态发光的影响. 相似文献
9.
Activation of silicon quantum dots and coupling between the active centre and the defect state of the photonic crystal in a nanolaser 下载免费PDF全文
A new nanolaser concept using silicon quantum dots (QDs) is proposed. The conduction band opened by the quantum confinement effect gives the pumping levels. Localized states in the gap due to some surface bonds on Si QDs can be formed for the activation of emission. An inversion of population can be generated between the localized states and the valence band in a QD fabricated by using a nanosecond pulse laser. Coupling between the active centres formed by localized states and the defect states of the two-dimensional (2D) photonic crystal can be used to select the model in the nanolaser. 相似文献
10.
Silicon quantum dots fabricated by nanosecond pulsed laser in nitrogen, oxygen or air atmosphere have enhanced photoluminescence (PL) emission with the stimulated emission observed at about 700 nm. It is difficult to distinguish between the photoluminescence peaks emitted from samples prepared in different atmospheres. The reason for the appearance of similar peaks may be the similar distribution of the localised states in the gap for different samples when silicon dangling bonds of quantum dots are passivated by nitrogen or oxygen. It is revealed that both the kind and the density of passivated bonds on quantum dot surface prepared in oxygen or nitrogen have a strong influence on the enhancement of PL emission. 相似文献