Photoinduced birefringence in poly(methyl methacrylate) (PMMA), polymeric thin films doped with di-azo Sudan G was investigated. A pump-probe method was used to study the dynamic behavior of the birefringence. The mechanism for the inducement of birefringence is discussed in terms of the photoisomerization of the di-azo Sudan G molecules. The results showed that the dynamic evolution of the photoinduced birefringence was such that the average birefringence increased, saturated, and then decreased with respect to the laser pump intensity. Also, an exponential-like relationship was observed between both the saturation and the isotropic states of the averaged transmitted probe beam (expressing the residual anisotropy) and the birefringence on one hand, and the intensity amplitudes of the pumping powers on the other hand. 相似文献
In the present research, an effective on chip electromembrane extraction (CEME) coupled with high performance liquid chromatography was presented for analysis of nortriptyline (NOR) and amitriptyline (AMI) as basic model analytes from urine samples. The chip consists of two polymethyl methacrylate (PMMA) parts with two craved microfluidic channels in each part. These channels were used as flow path for the sample solution and a thin compartment for the acceptor phase. A porous polypropylene sheet membrane impregnated with an organic solvent was placed between two parts of chip device to separate the channels. Two platinum electrodes were mounted at the bottom of these channels that were connected to a power supply providing the electrical driving force for migration of ionized analytes from sample solution through the porous sheet membrane into the acceptor phase. This new setup provides effective and reproducible extractions with low volume of sample solution. Efficient parameters on CEME of the model analytes were optimized using one variable at a time method. Under the optimized conditions, the calibration curve was linear in the range of 10.0–500 μg L−1 with coefficient of determination (r2) more than 0.9902. The relative standard deviations (RSDs %) for extraction and determination of the analytes were less than 6.8% based on six replicate measurements. LODs less than 4.0 μg L−1 were obtained for both of the model analytes. The preconcentration factors higher than 17.0-fold were obtained. The results demonstrated that CEME would be used efficiently for extraction and determination of AMI and NOR from urine samples. 相似文献
Three complexes containing 2-pyrazinecarboxylate (pzca–), including [Ni(pzca)2(H2O)2], [Co(pzca)2(H2O)2], and [Cu(pzca)2(H2O)2], have been synthesized and characterized using physico-chemical and spectroscopic methods. Furthermore, the structure of each complex was determined by single-crystal X-ray diffraction. All three complexes have an octahedral geometry, where the metal ion chelated by two carboxylate oxygens, two nitrogen atoms belonging to pyrazinic acid molecules, and two oxygen atoms of two water molecules. The catalytic activities of these complex-es were also investigated in the green synthesis of 2H-indazolo[2,1-b]phthalazine-triones by the reaction of hydrazine hydrate with an arylaldehyde, phthalic anhydride, and dimedone in acetic acid. 相似文献
A Kinetic Monte Carlo (KMC) simulation approach has been adopted in this study to capture evolutionary events in the course of free radical copolymerization, through which batch and starved‐feed semibatch processes are compared. The implementation of the KMC code developed in this work: (i) enables satisfactory control of the molecular weight of the copolymer by tracking the profiles of concentrations of macroradicals, monomers, and polymer as well as degree of polymerization, polydispersity, and chain length distribution; (ii) captures the bivariate distribution of chain length and copolymer composition; (iii) comprehensively tracks and analyzes detailed information on the molecular architecture of the growing chains, thus distinguishing between sequence length and polydispersity of chains produced in batch and starved‐feed semibatch operations; (iv) makes possible the screening of products, based on such details as the number and weight fractions of products having different comonomer units located at various positions along the copolymer chains. The aforementioned characteristics are achieved by stochastic calculations through code developed in‐house. This KMC simulator becomes a very useful tool for the development of tailored copolymers through free radical polymerization, with blocks separated with single units of a different type.
In this paper, a lattice Boltzmann method is employed to simulate the conjugate radiation–forced convection heat transfer in a porous medium. The absorbing, emitting, and scattering phenomena are fully included in the model. The effects of different parameters of a silicon carbide porous medium including porosity, pore size, conduction–radiation ratio, extinction coefficient and kinematic viscosity ratio on the temperature and velocity distributions are investigated. The convergence times of modified and regular LBMs for this problem are 15 s and 94 s, respectively, indicating a considerable reduction in the solution time through using the modified LBM. Further, the thermal plume formed behind the porous cylinder elongates as the porosity and pore size increase. This result reveals that the thermal penetration of the porous cylinder increases with increasing the porosity and pore size. Finally, the mean temperature at the channel output increases by about 22% as the extinction coefficient of fluid increases in the range of 0–0.03.
The crystal structure of 1-Methyl-3-([2,2-dimethyl-4,6-dioxo-1,3-dioxane-5-ylidene]methyl)urea (C9H12N2O5) has been determined by single crystal X-ray diffraction analysis. The crystals are monoclinic, a = 5.3179(2), b = 18.6394(6), c =10.8124(3) Å, β = 100.015(2)°, Z = 4, sp. gr. P21/c, R = 0.0381 for 2537 reflections with I > 2σ(I). Except for C(CH3)2 group, the molecule is planar. The structure is stabilized by inter- and intramolecular N-H...O hydrogen bonds and weak C-H...O interactions. 相似文献