A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

Carbonyl allylations by 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide

2-Propenyl tin species, prepared from 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide in dichloromethane, causes nucleophilic addition to aldehydes to produce the corresponding homoallylic alcohols.     

4,7‐Diiodo‐2,1,3‐benzothiadiazole and 7,7′‐diiodo‐4,4′‐bi(2,1,3‐benzothiadiazole)

In the crystal structures of the title compounds, C₆H₂I₂N₂S, (I), and C₁₂H₄I₂N₄S₂, (II), respectively, a large number of short inter‐heteroatom contacts, such as S?N, I?I and N?I, are observed. In (II), which is non‐centrosymmetric, two halves of the mol­ecule are related by a crystallographic twofold axis.     

Synthesis of two naturally occurring 3-methyl-2,5-dihydro-1-benzoxepin carboxylic acids

[structures: see text] Two naturally occurring 3-methyl-2,5-dihydro-1-benzoxepin carboxylic acids, 6-hydroxy-3-methyl-8-(phenylethyl)-2,5-dihydro-1-benzoxepin-9-carboxylic acid (radulanin E) (1) and 9-hydroxy-3-methyl-2,5-dihydro-1-benzoxepin-7-carboxylic acid (2), were synthesized using Stille coupling followed by Mitsunobu cyclization.     

Thermal degradation of poly[(tetramethyl-p-silphenylene) siloxane]

For the purpose of studying the mechanism of thermal degradation of poly[(tetramethyl-p-silphenylene) Siloxane] (poly TMPS) a series of polymers with silphenylene and siloxane bonds in the main chain were prepared and subjected to thermogravimetry (TG) and pyrolysis study. Analyses of products from poly TMPS degradation (in vacuum at a constant temperature) by gas chromatography (GC), infrared (IR), nuclear magnetic resonance (NMR) spectroscopy, and gas chromatography-mass spectrometry (GC–MS) revealed that degradation occurs at the silphenylene bonds. The TG curves obtained in He for heating rates of 1,2,2.5,7.5, and 10°C/min were analyzed by the Ozawa method; activation energies of 39 ± 1 and 45 ± 2 kcal/mol were obtained respectively for the initial cleavage of the methyl side group and the later-stage scission of the main-chain silphenylene bond which leads to a major weight loss. The results agree with those obtained for other structurally similar polymers.     

Synthesis, characterization and FET properties of novel dithiazolylbenzothiadiazole derivatives

Dithiazolylbenzothiadiazoles easily obtained have high electron affinity and the FET device of a trifluoromethylphenyl derivative exhibited a good n-type performance with high electron mobility.     

A brief study of the supercritical fluid chromatographic behavior of lanthanide β-diketonates

The chromatographic behaviors of lanthanide chelates of acetylacetone (ACAC), trifluoroacetylacetone (TFA), thenoyltrifluoroacetone (TTA), dipivaloylmethane (THD), 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedione (FOD), and the thenoyltrifluoroacetonepyridine (TTA·Py) adduct were investigated using packed column supercritical fluid chromatography. Mobile phases consisting of neat and alcohol modified CO₂ were used with a phenyl packed stationary phase. Lanthanide complexes of ACAC, THD, and FOD were shown to have better chromatographic performance compared to the corresponding chelates with TFA, TTA, and TTA·Py. In particular, TTA complexes such as Eu(TTA)₃ showed characteristic thermal decomposition in the mobile phase at elevated temperature. In addition, retention behavior was found to be a temperature dependent function of volatility and solubility for all chelates studied.     

Modification of poly(vinyl chloride). XIII. Crosslinking of poly(vinyl chloride) with dithiols and properties of the crosslinked products

PVC was crosslinked by immersing PVC–dithiol blends in ethylenediamine at 30°C. Properties of the products depended on the chain length and chemical structure of the crosslinkage and on the molecular weight of the polymer chain between crosslinks M_c. Crosslinking by the agent of soft structure and long molecular chain resulted in high tensile strength at break and impact strength and low brittle temperature. The use of the crosslinking agent of short molecular chain gave high yield strength, Young's modulus, and heat distortion temperature. The relation of M_c and the chemical structure of the crosslinks to the properties of the crosslinked rigid polymer was discussed in regard to the crosslinking effect and plasticizing effect.