[bmIm]OH: an efficient basic catalyst for the synthesis of 4H-benzo[d][1,3-]oxazin-4-one derivatives in solvent-free conditions

Reusable [bmIm]OH was found to be a highly efficient renewable homogenous catalyst for the rapid and convenient synthesis of benzoxazine-4-one derivatives from o-iodobenzoic-acid and benzonitrile at 75 °C in moderate to good yields. This methodology provides a facile and straightforward path to construct other related heterocycles in an eco-compatible fashion.     

Flow-injection determination of total iron in freshwater samples with neutralisation chemiluminescence

A flow-injection chemiluminescence method has been established for the determination of total iron in freshwater samples. The enhanced chemiluminescence emission was caused by the iron(II) from the neutralisation reaction of hydrochloric acid and sodium hydroxide without the use of any chemiluminescent reagent. The calibration graph was linear in the concentration range of 2.8–560 µg L^?1 (r ² = 0.9983, n = 8), with relative standard deviation (RSD; n = 4) in the range of 0.8–2.6%. The limit of detection (S/N = 3) was 0.56 µg L^?1 with injection throughput of 180 h^?1. The effect of common anions and cations were studied over their environmentally relevant concentrations in freshwaters. The method was successfully applied to determine total iron in freshwater samples. Iron(III) was reduced to iron(II) by using hydroxylammonium chloride. The proposed method was compared with spectrophotometric method and there was no significant difference between the two methods at the 95% confidence level (t-test). Analysis of river water (certified reference material SLRS-4) for iron(II), after reduction of iron(III) with hydroxylammonium chloride, gave good results (2.17 ± 0.22 µM compared with the certificate value of 1.85 ± 0.1 µM).     

Determination of phosphate in freshwater samples by flow-injection with lucigenin chemiluminescence

Lucigenin chemiluminescence (CL) in conjunction with flow-injection analysis (FIA) is used for the determination of phosphate in freshwater samples. The procedure is based on the formation of molybdophosphoric heteropoly acid (MoP–HPA) by the reaction of phosphate and ammonium molybdate under acidic conditions. CL emission was observed as a result of oxidation of lucigenin in aqueous sodium hydroxide solution in the presence of MoP–HPA. Calibration was linear up to 500?µg?L^?1 (r ^2?=?0.9998; n?=?8), with a detection limit (S/N?=?3) of 0.95?µg?L^?1. An injection throughput of 120 h^?1, and relative standard deviation (RSD; n?=?4) of 1.3–3.2% were achieved in the concentration range studied. An on-line chelating column was used to remove interfering cations. The method was applied to freshwater samples, and the results (51?±?1.0 – 107?±?2.0?µg?L^?1) did not differ significantly from results obtained using a spectrophotometric method (52.5?±?1.0 – 102?±?2.0?µg?L^?1) at 95% confidence level (t-test).     

Synthesis,characterisation and ion exchange properties of hybrid organic–inorganic composite material: polyacrylamide zirconium (IV) iodosulphosalicylate

ABSTRACT

Contamination of groundwater by heavy metal is one of the most emerging and serious environmental problems. There are so many methods which are available to overcome these problems. Among various available methods, hybrid organic–inorganic ion exchange resin has become more popular due to certain advantages over other available conventional methods; hence, in the present proposed work, we synthesised a hybrid organic–inorganic composite material polyacrylamide zirconium (IV) iodosulphosalicylate by using the sol-gel technique. Synthesised resin was characterised by various methods like Infrared spectroscopy and Thermogravimetric analysis-Differential thermal analysis. Various samples of this ion exchange resin are prepared by changing the condition of synthesis, i.e. concentration of acrylamide to rationalise the ion exchange capacity of the synthesise hybrid organic–inorganic ion exchange resins. A mixture of 0.1 M potassium iodate, 0.1 M sulphosalicylic acid and 0.1 M acrylamide was added dropwise to 0.4 M zirconium oxychloride accompanied by constant stirring for 8 h using magnetic stirrer at 70°C to yield polyacrylamide zirconium (IV) iodosulphosalicylate with maximum ion exchange capacity. Ion exchange capacity of synthesised resin was determined by column method and the maximum ion exchange capacity was found for Pb(II). Determination of k_d values shows that the resin was highly selective for Pb (II).The selectivity for Pb was also evaluated by using certain binary mixture separation such as Ni (II)-Pb(II), Cu(II)-Pb(II), Cd(II)-Pb(II), Sr(II)-Pb(II), Ba(II)-Pb(II),Zn(II)-Pb(II) and Mg(II)-Pb(II).     

Determination of carbaryl by flow injection with luminol chemiluminescence inhibition detection

A flow-injection procedure is described for the determination of carbaryl based on its inhibition effect on luminol-cobalt(II) chemiluminescence reaction in alkaline medium in the presence of hydrogen peroxide. The calibration data over the range 5.0?×?10^?7 to 20?×?10^?6?M give a correlation coefficient (r ²) of 0.9972 with relative standard deviations (RSD; n?=?4) in the range of 1.0–2.1% with a limit of detection (3?×?blank noise) of 2.37?×?10^?7?M for carbaryl. The sample throughput was 120?h^?1. The effects of some carbamates, anions, and cations were studied on luminol CL system for carbaryl determination. The proposed method has been applied to determine carbaryl in natural waters.     

Numerical study of forced convection heat transfer across a cylinder with various cross sections

Journal of Thermal Analysis and Calorimetry - The thermal performance of an isothermal horizontal cylinder with different selected cross sections in cross-flow was investigated numerically. These...     

Bulk ablation of soft tissue with intense ultrasound: modeling and experiments

Methods for the bulk ablation of soft tissue using intense ultrasound, with potential applications in the thermal treatment of focal tumors, are presented. An approximate analytic model for bulk ablation predicts the progress of ablation based on tissue properties, spatially averaged ultrasonic heat deposition, and perfusion. The approximate model allows the prediction of threshold acoustic powers required for ablation in vivo as well as the comparison of cases with different starting temperatures and perfusion characteristics, such as typical in vivo and ex vivo experiments. In a full three-dimensional numerical model, heat deposition from array transducers is computed using the Fresnel approximation and heat transfer in tissue is computed by finite differences, accounting for heating changes caused by boiling and thermal dose-dependent absorption. Similar ablation trends due to perfusion effects are predicted by both the simple analytic model and the full numerical model. Comparisons with experimental results show the efficacy of both models in predicting tissue ablation effects. Phenomena illustrated by the simulations and experiments include power thresholds for in vivo ablation, differences between in vivo and ex vivo lesioning for comparable source conditions, the effect of tissue boiling and absorption changes on ablation depth, and the performance of a continuous rotational scanning method suitable for interstitial bulk ablation of soft tissue.     

SPE-GC-MS for the Determination of Halogenated Acetic Acids in Drinking Water

The development and optimization of analytical methods for the better monitoring of disinfection by-products especially haloacetic acids in water are key step in order to estimate human exposure to such products after chlorination. A reliable and accurate analytical method is needed in order to reach the levels of concentration required by United States Environmental Protection Agency regulations. In this study a method was developed for determining halogenated acetic acids in drinking water, involving solid phase extraction, methylation derivatization, and GC-MS. The new SPE-GC-MS-SIM method is capable of analyzing all nine acids at extremely low μg L^–1 level. Run time is significantly reduced without compromising analytical results. The major advantages of the method are the simplicity of the chromatography, short run time and low detection limits. The method performance, limits of detection and spiking recovery were evaluated and the results proved that the accuracy and precision were good. This method outperforms previous GC-MS methods especially for the determination of dibromoacetic, dibromochloroacetic, dichlorobromoacetic and tribromoacetic acids. The method has been used to analyse domestic tap water and water samples collected at a local water treatment plant.

     

Quantum Spin Half Algebra and Generalized Megrelishvili Protocol for Confidentiality of Digital Images

International Journal of Theoretical Physics - Most of the enciphering structures are based on the transformation of mediums by describing the strict criteria. The presented article is based on...