Dark Energy with Phantom Crossing and the H0 Tension

We investigate the possibility of phantom crossing in the dark energy sector and the solution for the Hubble tension between early and late universe observations. We use robust combinations of different cosmological observations, namely the Cosmic Microwave Background (CMB), local measurement of Hubble constant (H0), Baryon Acoustic Oscillation (BAO) and SnIa for this purpose. For a combination of CMB+BAO data that is related to early universe physics, phantom crossing in the dark energy sector was confirmed at a 95% confidence level and we obtained the constraint H0=71.0−3.8+2.9 km/s/Mpc at a 68% confidence level, which is in perfect agreement with the local measurement by Riess et al. We show that constraints from different combinations of data are consistent with each other and all of them are consistent with phantom crossing in the dark energy sector. For the combination of all data considered, we obtained the constraint H0=70.25±0.78 km/s/Mpc at a 68% confidence level and the phantom crossing happening at the scale factor am=0.851−0.031+0.048 at a 68% confidence level.     

Effect of cyclodextrins on physico-chemical and release properties of Eudragit RS 100 microparticles containing glutathione

The objective of this work was to develop a novel microparticulate system based on the mucoadhesive polymer Eudragit-RS 100 and cyclodextrins (CDs), potentially useful for the oral administration of Glutathione (γ–glutamylcysteinylglycine, GSH). For this purpose, an oil-in-oil (O/O) emulsion-solvent evaporation method was used for the preparation of microparticles (MPs) containing GSH alone or together with one of the following CDs: α-, β-, γ-, methyl-β-(Me-β-), hydroxypropyl-β-(HP-β-) or sulfobutylether-β-cyclodextrin (SBE_7m-β-CD). MPs were obtained by emulsifying a mixture of Eudragit RS 100, GSH, CD and magnesium stearate in acetone or acetonitrile with a mixture of liquid paraffin and Span 80. Size, encapsulation efficiency, and drug release of the prepared MPs were evaluated. The results clearly indicated that all the examined properties were dependent on the water-miscible solvents and CD used. In particular, MPs prepared by using acetone or acetonitrile showed different size distributions with mean diameters in the ranges 82–350 and 15–22 μm, respectively. Moreover, encapsulation efficiency values were found to be high in all cases (71–99%) and was significantly affected by the CD type. The GSH release rates were evaluated employing dissolution media with different pH values (1.2, 6.8 and 7.4) and the following rank order was obtained for MPs prepared using acetone: MPs incorporating Me-β-CD > MPs without CD > MPs incorporating the remaining CDs. On the other hand, MPs prepared using acetonitrile gave the highest GSH release rate. Finally, stability of GSH encapsulated in MPs containing HP-β-CD to enzymatic attack by pepsin A, α-chymotrypsin, and γ-glutamyltranspeptidase was also investigated.     

The Pharmaceutical Use of Captisol®: Some Surprising Observations

The purpose of this paper is to share some recent observations on the pharmaceuticaluses and properties of Captisol^® or SBE_7M--CD in controlled porosity osmotic pump tablets (CP-OPT) and the underlying mechanism/sthat lead to apparent zero-order drug release pattern. It would have been simple toattribute the apparent zero-order release mechanism/s of poorly water-soluble drugsfrom CP-OPTs and pellets utilizing Captisol^®as both a solubilizing andosmotic agent, to purely osmotic and diffusional components. However, the mechanismmay be more related to a counterbalancing of physical properties as the concentration of Captisol^®changes within the matrix. Specifically, the initial concentration of Captisol^®within a core is 0.3–0.4M. When this drops to lower values an osmotic pressure drop occurs across the membrane. Therefore, drug release should not follow apparent zero-order kinetics if all the drug is solubilized. However, as the viscosity within the tablet also drops, the apparent diffusion coefficient of both Captisol^® and drug increases. Therefore, it appears that there is an initial resistance (hydraulic pressure) to fluid flow from the tablet through the rate-limiting microporous membrane. This resistance decreases so that even as osmotic pressure and concentration differences drop with time, counterbalancing faster release occurs. Osmotic driving force appears to be the most important initial driving force but a diffusional component becomes more significant with time.     

A simple procedure for the chromatographic analysis of nanoliter samples

A simple method for the analysis of nanoliter droplets is proposed, which is profitable when larger samples cannot be collected as, for instance, in the case of several biological fluids and particularly in clinical chemistry. A glass capillary associated to a micromanipulator is used to collect submicroliter volumes which are partially transferred into transparent polymeric tubings with known internal diameters (120–178 μm), where the volumes sampled are measured by meniscus collimations with a collimator microscope at suitable magnification. Both ends of these tubings are preliminarily equipped with ferrules and fittings, so as to make them suitable for connection as the loop to a conventional high-pressure injection valve. The reliability of this procedure has been tested for the analysis of Na⁺, K⁺ and Ca²⁺ present in minute synthetic standard samples (10–200 nL) by a conventional ion-chromatographic instrumentation. Relative standard deviations in peak area measurements (5–6%) are discussed in terms of the whole approximation affecting volume measurements, which depends on both the inconstancy of the inner diameter of the polymeric tubings employed and the uncertainty characterizing meniscus collimations. The proposed procedure can be easily extended to the determination of any organic or inorganic species present in very small samples, provided that their detection can be achieved by any chromatographic approach or, more generally, by flow injection analysis. Received: 16 June 1997 / Revised: 12 August 1997 / Accepted: 14 August 1997     

Catalytic partial oxidation of hydrogen sulfide on chabazite tuff

The catalytic activity of a chabazite tuff in the partial oxidation of H₂S to sulfur has been determined. The effects of temperature, feed concentration and chemical composition of the tuff on H₂S conversion and selectivity to sulfur have been investigated. Encouraging results in view of a possible use in H₂S removal processes have been obtained.

---

H₂S . , H₂S . H₂S.

     

Adamantyl ferrocene derivatives: Antioxidant abilities and effects on model lipid membranes

A series of homoannularly and heteroannularly substituted adamantyl ferrocene derivatives has been synthesized and their effects on membrane fluidity were investigated using liposomes as the membrane models. The liposome formulations of adamantyl ferrocene derivatives were characterized by using dynamic light scattering, differential scanning calorimetry and fluorescence anisotropy measurements. It was demonstrated that adamantyl ferrocene derivatives incorporated into the liposome significantly affect the structure of the lipid bilayer. The results of the study have revealed that adamantyl ferrocene derivatives, compounds 9 – 12, partition into the hydrophobic/hydrophilic interface of the membrane, causing a significant decrease in membrane fluidity. The antioxidant potential of synthesized compounds was assessed with DPPH method and it was shown that the examined compounds possess certain antioxidant activity.     

Wave equation for generalized Zener model containing complex order fractional derivatives

We study waves in a viscoelastic rod whose constitutive equation is of generalized Zener type that contains fractional derivatives of complex order. The restrictions following from the Second Law of Thermodynamics are derived. The initial boundary value problem for such materials is formulated and solution is presented in the form of convolution. Two specific examples are analyzed.     

Identification and Quantification of Polycyclic Aromatic Hydrocarbons in Polyhydroxyalkanoates Produced from Mixed Microbial Cultures and Municipal Organic Wastes at Pilot Scale

Polyhydroxyalkanoates (PHAs) are well-known biodegradable plastics produced by various bacterial strains, whose major drawback is constituted by the high cost of their synthesis. Producing PHAs from mixed microbial cultures and employing organic wastes as a carbon source allows us to both reduce cost and valorize available renewable resources, such as food waste and sewage sludge. However, different types of pollutants, originally contained in organic matrices, could persist into the final product, thus compromising their safety. In this work, the exploitation of municipal wastes for PHA production is evaluated from the environmental and health safety aspect by determining the presence of polycyclic aromatic hydrocarbons (PAHs) in both commercial and waste-based PHA samples. Quantification of PAHs by gas chromatography-mass spectrometry on 24 PHA samples obtained in different conditions showed very low contamination levels, in the range of ppb to a few ppm. Moreover, the contaminant content seems to be dependent on the type of PHA stabilization and extraction, but independent from the type of feedstock. Commercial PHA derived from crops, selected for comparison, showed PAH content comparable to that detected in PHAs derived from organic fraction of municipal solid waste. Although there is no specific regulation on PAH maximum levels in PHAs, detected concentrations were consistently lower than threshold limit values set by regulation and guidelines for similar materials and/or applications. This suggests that the use of organic waste as substrate for PHA production is safe for both the human health and the environment.