Quinoprotein glucose dehydrogenase modified carbon paste electrode for the detection of phenolic compounds

The development of an amperometric biosensor for the determination of phenolic compounds is described, using quinoprotein glucose dehydrogenase. The enzyme is integrated into carbon paste and its ability to donate electrons to oxidized phenolic compounds during glucose oxidation is exploited. The sensor response is based on electrochemical oxidation of the phenolic compound followed by its enzymatic regeneration when the bulk solution contains glucose and the electrode is potentiostated at +500 mV (vs. Ag/AgCl/0.1 mol/L KCl). As the result of the catalytic analyte regeneration the electrodes offer very sensitive measurements of redox species like p-aminophenol and hydroquinone and catecholamines such as epinephrine, norepinephrine, and dopamine. The sensor performance is characterized for the different substrates. Highest sensitivity is achieved for p-aminophenol which could be determined at sub-nanomolar level.     

trans-Bis-[(−)ephedrinate]-palladium complex: synthesis, molecular modeling and use as catalyst

The reaction between palladium acetate, (−)-ephedrine and potassium acetate led to bis-chelate complex Pd[OCH(Ph)NH(Me)]₂ whose the trans-structure is obtained from calculations. The use of this complex to catalyze either the 1,4-hydrogenation of (E)-2-benzyliden-1-tetralone or Heck reaction of phenyl iodide with 3-methyl-3-buten-2-ol led to a low enantiomeric excess.     

Lipase surface diffusion studied by fluorescence recovery after photobleaching

We have analyzed surface diffusion properties of a variant of Thermomyces lanuginosa lipase (TLL) on hydrophilic silica and silica methylated with dichlorodimethylsilane (DDS) or octadecyltrichlorosilane (OTS). For this study a novel method for analysis of diffusion on solid surfaces was developed. The method is based on fluorescence recovery after photobleaching using confocal microscopy. When a rectangular area of the sample was photobleached, fluorescence recovery could be analyzed as one-dimensional diffusion, resulting in simplified mathematical expressions for fitting the data. The method was initially tested by measuring bovine serum albumin diffusion on glass, which led to a diffusion coefficient in good correspondence to earlier reports. For the analysis of TLL diffusion, ellipsometry data of TLL adsorption were used to calibrate fluorescence intensity to surface density of lipase, enabling measurements of the diffusion coefficient at different surface densities. The average diffusion coefficient was calculated in two time intervals after adsorption. Mobile fraction and diffusion coefficient were lowest on the OTS surface, when extrapolated to infinite surface dilution. Moreover, the diffusion rate decreased with time on the hydrophobic surfaces. Our observations can be explained by the surface dependence on the distribution of orientations and conformations of adsorbed TLL, where the transition from the closed to the catalytically active open and more hydrophobic structure is important.     

The complete 51V MAS NMR spectrum of surface vanadia nanoparticles on anatase (TiO2): vanadia surface structure of a DeNOx catalyst

The first observations of the complete manifold of spinning sidebands (ssbs) including both the central and satellite transitions in (51)V MAS NMR spectra of surface vanadia nanoparticles on titania in DeNO(x) catalysts are presented. (51)V quadrupole coupling and chemical shift anisotropy parameters for the dominating vanadia structure are determined from (51)V MAS NMR spectra recorded at 9.4 and 14.1 T. Based on correlations previously established between (51)V NMR parameters and crystal structure data for inorganic vanadates, the NMR data are consistent with vanadium in a distorted octahedral oxygen coordination environment for the so-called strongly bonded vanadia species on the surface. The investigation includes two vanadia-titania model catalysts and six industrial-type DeNO(x) catalysts.     

Optimization of a sodium ion-selective electrode for use in serum measurements

A sodium ion-selective polymeric membrane electrode has been optimized, especially with reference to serum measurements. For a given combination of polymer and ligand, the choice of membrane solvent is critical. Potentiometric measurements and electrodialysis experiments have shown that the dielectric constant and solubility parameter of the solvent influence the electrode selectivities, stability, slope and limit of detection. For use in serum measurements, it is essential to use an appropriate analytical technique, such as Flow Injection Analysis, which permits exposures to serum for only short periods of time.     

Component reconstruction in the primary space of spectra and concentrations. Alternating regression and related direct methods

A set of methods that extract the spectral components in a chromatographic run is considered. The methods do not need libraries of previously known spectra or retention times. The methods have been developed for two-dimensional spectra but they can also be used for chromatographic analyses with a single-channel detector. The methods are direct; they do not use principal components as the starting point. Alternating regression (AR) remains in the primary space of spectra and concentrations during the calculations. Random numbers are used as the starting spectra. Regression is used to solve first for the concentrations, then for the spectra. The method uses two kinds of constraints: all spectra and concentrations are forced to be positive; and all concentration profiles are forced to a unimodal shape with a single local maximum. It is assumed that all observations are a linear sum of components. Compact alternating regression (CAR) is a new variant of the basic AR. The idea is to replace multiplication of a large matrix by two multiplications of smaller matrices. This typically speeds up the iterations by a factor of ten. AR and CAR have been successfully used with combined techniques such as gas chromatography—mass spectrometry and liquid chromatography with UV—visible detection. The reliability of the solution is checked by repeatedly injecting noise and performing the analysis several times. This produces estimates of confidence intervals. AR and CAR have recently been extended to handle single-dimensional signals. Examples are single-channel detectors such as the flame ionization detector in gas or liquid chromatography with a fixed-wavelength UV detector. A batch of samples is used as the observation matrix. As a result, one obtains both the concentrations and the elution shapes of individual chromatographic peaks.     

Affinity interactions between phenylboronic acid-carrying self-assembled monolayers and flavin adenine dinucleotide or horseradish peroxidase

A method is provided for the recognition of glycated molecules based on their binding affinities to boronate-carrying monolayers. The affinity interaction of flavin adenine dinucleotide (FAD) and horseradish peroxidase (HRP) with phenylboronic acid monolayers on gold was investigated by using voltammetric and microgravimetric methods. Conjugates of 3-aminophenylboronic acid and 3,3'-dithiodipropionic acid di(N-hydroxysuccinimide ester) or 11-mercaptoundecanoic acid were prepared and self-assembled on gold surfaces to generate monolayers. FAD is bound to this modified surface and recognized by a pair of redox peaks with a formal potential of -0.433 V in a 0.1 M phosphate buffer solution, pH 6.5. Upon addition of a sugar to the buffer, the bound FAD could be replaced, indicating that the binding is reversible. Voltammetric, mass measurements, and photometric activity assays show that the HRP can also be bound to the interface. This binding is reversible, and HRP can be replaced by sorbitol or removed in acidic solution. The effects of pH, incubation time, and concentration of H(2)O(2) were studied by comparing the catalytic reduction of H(2)O(2) in the presence of the electron-donor thionine. The catalytic current of the HRP-loaded electrode was proportional to HRP concentrations in the incubation solution in the range between 5 microg mL(-1) and 0.1 mg mL(-1) with a linear slope of 3.34 microA mL mg(-1) and a correlation coefficient of 0.9945.     

Determination of lead in phosphate ore and phosphogypsum

Laser induced breakdown spectroscopy (LIBS) is applied to analyze aqueous solutions of Li(+), Na(+), Ca(2+), Ba(2+), Pb(2+), Cd(2+), Hg(2+) and Er(3+) and suspensions of ErBa(2)Cu(3)O(x) particles (d=0.2 microm). An excimer (308 nm) pumped dye laser with laser pulse at 500 nm and pulse energy at 22+/-2 mJ is used to produce plasma in aqueous solution. Plasma emission lines of the elements are detected by a photodiode array detector. Detection limits of the metal ions are 500 mg/l for Cd(2+), 12.5 mg/l for Pb(2+), 6.8 mg/l for Ba(2+), 0.13 mg/l for Ca(2+), 13 microg/l for Li(+) and 7.5 microg/l for Na(+). No mercury and erbium emission can be detected, even at Hg(2+) and Er(3+) concentrations of up to the g/l range. On the other side, for Er in suspensions of ErBa(2)Cu(3)O(x) particles a more than 10(3) times higher sensitivity is found than for dissolved Er(3+). This result gives a possibility to analyze colloid-borne metal ions with an increased sensitivity.