Probing the Catalytic Activity of Reduced Graphene Oxide Decorated with Au Nanoparticles Triggered by Visible Light

Hybrid materials in which reduced graphene oxide (rGO) is decorated with Au nanoparticles (rGO–Au NPs) were obtained by the in situ reduction of GO and AuCl₄^?_(aq) by ascorbic acid. On laser excitation, rGO could be oxidized as a result of the surface plasmon resonance (SPR) excitation in the Au NPs, which generates activated O₂ through the transfer of SPR‐excited hot electrons to O₂ molecules adsorbed from air. The SPR‐mediated catalytic oxidation of p‐aminothiophenol (PATP) to p,p′‐dimercaptoazobenzene (DMAB) was then employed as a model reaction to probe the effect of rGO as a support for Au NPs on their SPR‐mediated catalytic activities. The increased conversion of PATP to DMAB relative to individual Au NPs indicated that charge‐transfer processes from rGO to Au took place and contributed to improved SPR‐mediated activity. Since the transfer of electrons from Au to adsorbed O₂ molecules is the crucial step for PATP oxidation, in addition to the SPR‐excited hot electrons of Au NPs, the transfer of electrons from rGO to Au contributed to increasing the electron density of Au above the Fermi level and thus the Au‐to‐O₂ charge‐transfer process.     

Influence of nickel on 475°C embrittlement of Fe−Cr−Ni alloys: Mössbauer effect study

The phenomenon of “475°C embrittlement” of Fe?Cr?Ni alloys with Fe/Cr ratios of 2.7 and 1.05, containing 0.2 and 4 at.% Ni, has been investigated using the Mössbauer effect and hardness measurements. The results show that the addition of nickel to Fe-xCr alloys (x=25 and 45 at.%) increases the transformation rate notoriously in the first hours of aging, the effect of this element being more important for alloys with Fe/Cr=1.05.     

X-ray diffraction and solid-state NMR studies of a germanium binuclear complex

A compound formulated as (C4H12N2)[Ge2(pmida)2(OH)2] x 4 H2O (where pmida(4-) = N-(phosphonomethyl)iminodiacetate and C4H12N2(2+) = piperazinedium cation), containing the anionic [Ge2(pmida)2(OH)2]2- complex, has been synthesised by the hydrothermal approach and its structure determined by single-crystal X-ray diffraction analysis. Several high-resolution solid-state magic-angle spinning (MAS) NMR techniques, in particular two-dimensional 1H-X(13C,31P) heteronuclear correlation (HETCOR) and 1H-1H homonuclear correlation (HOMCOR) experiments incorporating a frequency-switched Lee-Goldburg (FS-LG) decoupling scheme, have been employed for the first time in such a material. Using these tools in tandem affords an excellent general approach to study the structure of other inorganic-organic hybrids. We assigned the NMR resonances with the help of C...H and P...H internuclear distances obtained through systematic statistical analyses of the crystallographic data. The compound was further characterised by powder X-ray diffraction techniques, IR and Raman spectroscopy, and by elemental and thermal analyses (thermogravimetric analysis and differential scanning calorimetry).     

Determination of moxifloxacin in tablets and human urine by square-wave adsorptive voltammetry

This work presents an electroanalytical methodology developed for square-wave voltammetry based in the electrochemical reduction in hanging mercury drop electrode (HMDE), which is simple, fast, reliable and sensitive for determination of moxifloxacin (MOXI) in tablets and spiked urine human samples. The support electrolyte that provided a more defined and intense peak current for MOXI determination was the phosphate buffer 0.04 mol l^{− 1} pH 8.0. In the best-optimized conditions the drug presented an only peak of reduction at − 1.38 V vs. Ag/AgCl, using an E_acc. of − 0.30 V. An LOD of 0.44 and 3.20 ng ml^{− 1} and an LOQ of 1.46 and 10.60 ng ml^{− 1} were found for the pure standard of moxifloxacin and in the presence of matrix, respectively. A good recovery was obtained for assay spiked urine samples and a good quantification of MOXI was achieved in a commercial formulation. The methodology proposed was more sensitive than the spectrofluorimetric and spectrophotometric method with precision and accuracy equivalent.     

Phenomena Affecting the Equilibrium of Al(III) and Zn(II) Extraction with Winsor II Microemulsions

The extraction of Al(III) and Zn(II) from an aqueous solution with two water-in-oil microemulsions, one containing di(2-ethylhexyl)phosphoric acid (DEHPA), was investigated to aid the understanding of the role of the extractant and the metal specific characteristics in the mechanism of microemulsion extraction. The extraction of Al with the DEHPA microemulsion increased by a factor of about 10 with respect to that in the conventional DEHPA system, whereas the extraction of Zn was lower than that in the single DEHPA system. Extraction with the DEHPA-free microemulsion was very low, showing that metal ion solubilization was not important in the mechanism of microemulsion extraction. It is proposed that the effect of the mixed microemulsion on the metal distribution coefficient is the result of the balance between a decrease in the complexation reaction yield due to the interaction between butanol and DEHPA, and the adsorption of the metal complex at the macro- and microinterfaces. The former leads to a decrease in Zn(II) extraction and the latter to Al(III) extraction synergism. Copyright 2000 Academic Press.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

Malva sylvestris L. extract suppresses desferrioxamine‐induced PGE2 and PGD2 release in differentiated U937 cells: the development and validation of an LC‐MS/MS method for prostaglandin quantification

Malva sylvestris is a species used worldwide as an alternative to anti‐inflammatory therapies; however, its mechanism of action remains unknown. In this paper, the anti‐inflammatory effects of M. sylvestris alcoholic extracts were evaluated by measuring the pro‐inflammatory mediators PGE₂ and PGD₂ in desferrioxamine‐stimulated phorbol 12‐myristate 13‐acetate‐differentiated U937 cells. An HPLC‐DAD fingerprint of the M. sylvestris extract was performed and caffeic acid, ferulic acid and scopoletin were identified and quantified. An HPLC‐MS/MS method was developed and validated to separate and measure the prostaglandins. The lower limits of detection (~0.5 ng/mL for PGE₂ and PGD₂) and quantification (1.0 ng/mL for PGE₂ and PGD₂) indicated that the method is highly sensitive. The calibration curves showed excellent coefficients of correlation (r > 0.99) over the range of 1.0–500.0 ng/mL, and at different levels, the accuracy ranged from 96.4 to 106.4% with an RSD < 10.0% for the precision study. This method was successfully applied using U937‐d cells. A significant dose‐dependent reduction of PGE₂ and PGD₂ levels occurred using 10 µg/mL (10.74 ± 2.86 and 9.60 ± 6.89%) and 50 µg/mL of extract (48.37 ± 3.24 and 53.06 ± 6.15%), suggesting that the anti‐inflammatory mechanisms evoked by M. sylvestris may be related to modulation of these mediators. Copyright © 2014 John Wiley & Sons, Ltd.     

Cellulose/iron oxide hybrids as multifunctional pigments in thermoplastic starch based materials

Cellulose/iron oxide hybrids were prepared by the controlled hydrolysis of FeC₂O₄ in the presence of vegetable and bacterial cellulose fibres as substrates. By varying the relative amount of FeC₂O₄ and NaOH, either hematite or magnetic iron oxides were grown at the cellulose fibres surfaces. This chemical strategy was used for the production of a number of materials, whose coloristic properties associated to their reinforcement role allowed their use as new hybrid pigments for thermoplastic starch (TPS) based products. The TPS reinforced materials were characterized by several techniques in order to evaluate: the morphology and the compatibility between the matrix and the fillers; the mechanical reinforcement effect of the cellulose/iron oxide pigments on TPS and the coloristic properties of the composites. All materials showed good dispersion and strong adhesion for the cellulose/iron oxide nanocomposites in the TPS matrix thus resulting in improved mechanical properties.     

Chemical Strategies for Dendritic Magneto-plasmonic Nanostructures Applied to Surface-Enhanced Raman Spectroscopy

Chemical analyses in the field using surface-enhanced Raman scattering (SERS) protocols are expected to be part of several analytical procedures applied to water quality monitoring. To date, these endeavors have been supported by developments in SERS substrate nanofabrication, instrumentation portability, and the internet of things. Here, we report distinct chemical strategies for preparing magneto-plasmonic (Fe₃O₄ : Au) colloids, which are relevant in the context of trace-level detection of water contaminants due to their inherent multifunctionality. The main objective of this research is to investigate the role of poly(amidoamine) dendrimers (PAMAMs) in the preparation of SERS substrates integrating both functionalities into single nanostructures. Three chemical routes were investigated to design magneto-plasmonic nanostructures that translate into different ways for assessing SERS detection by using distinct interfaces. Hence, a series of magneto-plasmonic colloids have been characterized and then assessed for their SERS activity by using a model pesticide (thiram) dissolved in aqueous samples.     

Optical studies of ZnO nanocrystals doped with Eu3+ ions

Synthetic ZnO nanocrystals have been intentionally doped with Eu³⁺ ions. Structural analysis performed on the nanocrystals showed wurtzite-ZnO as the only phase present in the samples. Photoluminescence in emission and excitation modes allows the assignment of the intra-4f⁶ transitions for the Eu³⁺ ions. From the analysis of the optical data we are able to demonstrate that multiple Eu-related optical centres are present in the studied samples. Oxygen vacancies are likely candidates to be responsible for the ion accommodation in the ZnO lattice and from the photoluminescence excitation data we tentatively assign a trap level at ∼200 meV below the conduction band to this intrinsic defect. PACS 78.66.Hf; 78.67.-n; 82.80.Yc