Enantioselective hydrogenation of diaryl-substituted α,β-unsaturated nitriles

α,β-Unsaturated nitriles can be hydrogenated with enantioselectivities up to 88% ee using chiral ruthenium-diphenylphosphino bisaryl and bisheteroaryl complexes such as ruthenium(II)-BINAP and ruthenium(II)-BINP. Mechanistic investigations indicate that conversion is accelerated by electron-rich ligands and that an additional coordinative group needs be present in order to promote conversion. The chiral products are useful building blocks for the synthesis of histamine H₂ agonists of the arpromidine type.     

Periodic solutions of nonlinear impulsive differential inclusions with constraints

In this paper we obtain the existence of periodic solutions for nonlinear ``invariance' problems monitored by impulsive differential inclusions subject to impulse effects.

     

New Class of Chiral Diphosphine Ligands for Highly Efficient Transition Metal-Catalyzed Stereoselective Reactions: The Bis(diphenylphosphino) Five-membered Biheteroaryls

The synthesis and application of three examples of a new class of chiral (C(2)) atropisomeric diphosphines characterized by two interconnected five-membered heteroaromatic rings, with hindered rotation around the interanular bond, are described. Optically pure (+)- and (-)-2,2'-bis(diphenylphosphino)-4,4',6,6'-tetramethyl-3,3'-bibenzo[b]thiophene (tetraMe-bitianp) (1a) and the parent unsubstituted system (+)- and (-)-bitianp (1b) were synthesized. They were found to be optically stable at 100 degrees C and were successfully employed as ligands in the Ru(II)-catalyzed hydrogenation of alpha- and beta-oxo esters to the corresponding alpha- and beta-hydroxy esters and in the hydrogenation of olefinic substrates. The optical and chemical yields were comparable with those reported for the same Ru(II)-binap-catalyzed reactions carried out under the same experimental conditions. The 2,2'-bis(diphenylphosphino)-3,3'-bibenzo[b]furan (1c), the oxygenated analogue of bitianp, was found to be configurationally unstable at room temperature. Complete structural X-ray elucidation of the Pd complexes of 1a-c is reported. The advantages of these biheteroaromatic ligands over the classical biaryl systems are discussed.     

Aroma composition of red wines by different extraction methods and Gas Chromatography-SIM/MASS spectrometry analysis

One hundred and one volatile compounds, reported in literature as powerful odorants of wine, were quantified by Gas Chromatography-Selective Ion Monitoring/Mass Spectrometry (GC-SIM/MS) in Primitivo, Aglianico, Merlot and Cabernet Sauvignon red wines. Wine samples were extracted by 3 different extraction methods: 1) separation of the alcoholic fraction from the aqueous phase by salting-out and subsequent extraction by liquid-liquid micro-extraction with 1,1,2-trichlorotrifluoroethane (Freon 113); 2) extraction by liquid-liquid micro-extraction with dichloromethane; 3) solid phase extraction (SPE cartridge: 800 mg of LiChrolut EN resin) with pentane-dichloromethane (20:1) and dichloromethane. The selection of the ion fragments used for quantification was directly performed on a red wine sample. For each compound the area of the corresponding peak was normalized respect to the peak of the internal standard and then interpolated in a calibration curve obtained analysing a model wine solution (water, ethanol, tartaric acid and known amounts of analytes and of internal standard). The methods showed a good linearity: r2>0.990, except for farnesol (isomer a and c), octanal, decanal, furaneol and phenylacetic acid with 0.966 < or = r2 < or = 0.990. The 7 most powerful odorants were: beta-damascenone, acetaldehyde, maltol, ethyl 2-methylbutanoate, ethyl 3-methylbutanoate, 3-methylbutanoic acid and acetal; 7 other slightly less important were: ethyl hexanoate, ethyl acetate, 1-octen-3-ol, butanoic acid, rose oxide, furaneol and sotolon. The Aglianico wines were characterised by the major fermentation compounds (esters, fatty acids and 2-phenylethanol), beta-damascenone, beta-ionone and linalool. The Primitivo wines were characterized by furaneol, methoxypyrazine, gamma-nonalactone and acetaldehyde, while Cabernet Sauvignon and Merlot wines principally by cask derivates (vanillin, (Z) 3-methyl-gamma-octalactone [(Z) wiskylactone], maltol and eugenol), some aldehydes and 3-isopropyl-2-methoxypyrazine.     

Metal complexes of phytohormones. Part II. Copper(II) complexes of 6-benzylaminopurine

Summary Copper(II) complexes with 6-benzylaminopurine (BAPH) of the types Cu(BAPH)₂(ClO₄)₂·2H₂O (1) Cu(BAP)₂·4H₂O (2), and Cu(BAPH₂)Cl₃·MeOH (3), have been synthesized and characterized by conductivity, magnetic measurements, i.r., electronic and e.s.r. spectroscopy.     

Metal ion catalysis in the beta-elimination reactions of N-[2-(4-pyridyl)ethyl]quinuclidinium and N-[2-(2-pyridyl)ethyl]quinuclidinium in aqueous solution

Catalysis of the beta-elimination reaction of N-[2-(4-pyridyl)ethyl]quinuclidinium (1) and N-[2-(2-pyridyl)ethyl]quinuclidinium (2) by Zn(2+) and Cd(2+) in OH(-)/H(2)O (pH = 5.20-6.35, 50 degrees C, and mu = 1 M KCl) has been studied. In the presence of Zn(2+), the elimination reactions of both isomers occur from the Zn(2+)-complexed substrates (C). The equilibrium constants for the dissociation of the Zn(2+)-complexes are as follows: K(d) = 0.012 +/- 0.003 M (isomer 1) and K(d) = 0.065 +/- 0.020 M (isomer 2). The value of k(C)(H2O) for isomer 1 is 4.81 x 10(-6) s(-1). For isomer 2 both the rate constants for the "water" and OH(-)-induced reaction of the Zn(2+)-complexed substrate could be measured, despite the low concentration of OH(-) in the investigated reaction mixture [k(C)H2O)= 1.97 x 10(-6) s(-1) and k(C)(OH-)= 21.9 M(-1) s(-1), respectively]. The measured metal activating factor (MetAF), i.e., the reactivity ratio between the complexed and the uncomplexed substrate, is 8.1 x 10(4) for the OH(-)-induced elimination of 2. This high MetAF can be compared with the corresponding proton activating factor (Alunni, S.; Conti, A.; Palmizio Errico, R. J. Chem. Soc., Perkin Trans. 2 2000, 453), PAF = 1.5 x 10(6) and is in agreement with an E1cb irreversible mechanism (A(xh)D(E)* + D(N)) (Guthrie, R. D.; Jencks, W. P. Acc. Chem. Res. 1989, 22, 343). A value of k(C)(H2O)>or= 23 x 10(-7) s(-1) is estimated for the Cd(2+)-complexed isomer 2, while catalysis by Cd(2+) has not been observed for isomer 1.     

Hydrido-Carbonyl Rhenium Clusters with a Square Geometry of the Metal Core. Synthesis and X-Ray Characterization of the Novel [Re4(μ-H)3(CO)16]− Anion

Three and tetranuclear ring clusters have been obtained by treatment of [Re₂(CO)₈(THF)₂] with carbonyl-rhenates containing two terminal hydrides. The reaction with [ReH₂(CO)₄]^- provided a selective route to the previously known [Re₃(-H)₂(CO)₁₂]^- triangular cluster anion 1. The reaction with [Re₂H₂(-H)(CO)₈]^- gave the novel [Re₄(-H)₃(CO)₁₆]^- anion 2, containing a rare example of a puckered-square metal cluster. Protonation of 1 is known to afford the neutral [Re₃(-H)₃(CO)₁₂] species 3. Analogously the reaction of 2 with a strong acid afforded the previously known square metal clusters [Re₄(-H)₄(CO)₁₆] 4. The reaction could not be reversed by treatment with bases. Photolysis of 4 gave the unsaturated complex [Re₂(-H)₂(CO)₈] 5: this is the reverse of the dimerization reaction, that in THF at room temperature produces 4 from 5. Thermal treatment (reflux in cyclohexane for 24 h) left 4 almost unchanged. A single crystal X-ray analysis of [NEt₄]2 showed a s/e/s/s (e=eclipsed, s=staggered) conformation of the Re(CO)₄ units, leading to a puckered geometry of the ring, at variance with the square-planar geometry of 4 (all eclipsed). Two of the three hydrides of 2 have been located as bridging the Re–Re edges from inside the metal ring, as previously observed in 4. Density functional computations indicated a puckered conformation as the most stable for both 2 and 4, with very low activation energies for ring inversion (6.6 and 2.2 kcal·mol^-1, respectively), but ruled out solid state fluxionality for 4, whose observed planar geometry must be attributed to packing stabilization.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.