A novel method for determination of inorganic oxyanions by electrospray ionization mass spectrometry using dehydration reactions

Novel methods for the determination of inorganic oxyanions by electrospray (ES) ionization mass spectrometry have been developed using dehydration reactions between oxyanions and carboxylic acids at the ES interface. Twelve oxyanions (VO₃^?, CrO₄^2?, MoO₄^2?, WO₄^2?, BO₃^3?, SiO₃^2?, SiO₄^4?, AsO₄^4?, AsO₂^?, SeO₄^2?, SeO₃^2? and NO₂^?), out of 16 tested, reacted with at least one of four aminopolycarboxylic acids, i.e. iminodiacetic acid (IDA), nitrilotriacetic acid (NTA), trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetic acid and triethylenetetramine‐N,N,N′,N″,N′″,N′″‐hexaacetic acid, at the ES interface to produce the dehydration products that gave intense mass ion responses, sufficient for trace analysis. As examples, trace determinations of Cr^VI and silica in water samples were achieved after online ion exchange chromatography, where the dehydration product of CrO₄^2? and NTA (m/z 290) and that of SiO₄^4? and IDA (m/z 192) were measured. The limits of detection of the respective methods were 17 nM (0.83 ng Cr/ml) for Cr^VI and 0.17 μM (4.8 ng Si/mL) for SiO₄^4?. Copyright © 2016 John Wiley & Sons, Ltd.     

Revisiting the extrapolation of correlation energies to complete basis set limit

The extrapolation scheme of correlation energy is revisited to evaluate the complete basis set limit from double‐zeta (DZ) and triple‐zeta levels of calculations. The DZ level results are adjusted to the standard asymptotic behavior with respect to the cardinal number, observed at the higher levels of basis sets. Two types of adjusting schemes with effective scaling factors, which recover errors in extrapolations with the DZ level basis set, are examined. The first scheme scales the cardinal number for the DZ level energy, while the second scheme scales the prefactor of the extrapolation function. Systematic assessments on the Gaussian‐3X and Gaussian‐2 test sets reveal that these calibration schemes successfully and drastically reduce errors without additional computational efforts. © 2015 Wiley Periodicals, Inc.     

Synthesis of Disaccharide Nucleosides by the O‐Glycosylation of Natural Nucleosides with Thioglycoside Donors

Disaccharide nucleosides constitute an important group of naturally‐occurring sugar derivatives. In this study, we report on the synthesis of disaccharide nucleosides by the direct O‐glycosylation of nucleoside acceptors, such as adenosine, guanosine, thymidine, and cytidine, with glycosyl donors. Among the glycosyl donors tested, thioglycosides were found to give the corresponding disaccharide nucleosides in moderate to high chemical yields with the above nucleoside acceptors using p‐toluenesulfenyl chloride (TolSCl) and silver triflate (AgOTf) as promoters. The interaction of these promoters with nucleoside acceptors was examined by ¹H NMR spectroscopic experiments.     

Coarse Metal Powder-Assisted pulsed CO2 Laser-induced Breakdown Spectroscopy for the Direct Determination of Heavy Metals in Soil

A novel method of laser-induced plasma spectroscopy utilizing a pulsed transversely excited atmospheric CO₂ laser has been developed for the high-sensitivity determination of heavy metals in soil. A coarse metal powder was used to trap the soil and to assist with plasma generation. When the CO₂ laser (10.6?µm, 1.5?J, 200?ns) was irradiated on the metal and soil powder, a high-temperature and long-lifetime luminous plasma was induced. Fine particles of soil were dissociated and were excited in the plasma region. The method was used for the rapid determination of Cr, Pb, and Hg in loam. The limits of detection for Cr, Pb, and Hg were approximately 0.8, 15, and 0.7?mg/kg, respectively.     

Interpretation of the Role of Composition on the Inclusion Efficiency of Monovalent Cations into Cobalt Hexacyanoferrate

Cobalt hexacyanoferrate of various compositions was prepared in flow mode and the role of the vacancy on the structure, thermogravimetric (TG) properties, and the adsorption efficiency was studied. The material, Na_yCo[Fe(CN)₆]_1−x ⋅ z H₂O, with a minimum vacancy of x=0.014 to the highest x=0.47, was obtained. The TG-differential scanning calorimetry (DSC) profile showed a distinct influence of the vacancy on the water release temperature. Materials with x>0.35 showed a smooth release of water at a relatively lower temperature. However, for the materials with x<0.35, water release took place in multiple steps, suggesting the existence of various forms of water. The FTIR profiles supported the existence of free and bonded water molecules. However, the materials with multiple water peaks in the FTIR spectra showed a shift of the major XRD peaks when heated at 285 °C in N₂ atmosphere. Regarding the effect of the vacancy on the adsorption behavior, for NH₄, the adsorption was found to be proportional to the number of Na atoms in the material, confirming the ion-exchange process. On the contrary, the materials with low vacancy and high Na content showed nominal Cs adsorption capacity. Interestingly, the K adsorption capacity was found to be in between that of the other two ions. This means the ionic size decides the rate of placement into the interstitial sites. For larger ions like Cs, the ease of percolation via the vacancy decides the overall adsorption efficiency.     

New heterocyclic metallomesogens: synthesis,mesomorphic and thermal behaviours of Cu(II) complexes with 1,2,3-triazole-based Schiff bases ligands

Two series of new Cu(II) complexes derived from the reaction of copper acetate with the non-linear 1,2,3-triazole-based Schiff bases have successfully been synthesised. The structures of the ligands and its complexes were elucidated by elemental analysis, FT-IR, ¹H-NMR and UV–visible spectroscopic techniques. The differential scanning calorimetry and polarizing optical microscopy supported the anisotropic properties of uncoordinated ligands in which the focal conic fan-shaped texture and/or broken fan-shaped texture characteristics of respective SmA and SmC phases were recorded. However, not all of their corresponding Cu(II) complexes are mesogenic. Although the iodo-substituted ligands with even parity C₁₀H₂₉ to C₁₄H₃₃ are non-stable and exhibit SmA phase which is not reproducible, the ultimate Cu(II) complexes show exclusively stable SmA phase. This observation can be ascribed to the enhanced colinearity and molecular anisotropic by the presence of Cu-N and Cu-O coordination modes. On the other hand, the comparison studies show that different positions of ortho-hydroxyl group affect the mesomorphic and thermal behaviour of ligands and Cu(II) complexes.     

Additive comparisons of stopping values and supremum values for finite stage multiparameter stochastic processes

This paper concerns the optimal stopping problem for discrete time multiparameter stochastic processes with the index set Nd. In the classical optimal stopping problems, the comparisons between the expected reward of a player with complete foresight and the expected reward of a player using nonanticipating stop rules, known as prophet inequalities, have been studied by many authors. Ratio comparisons between these values in the case of multiparameter optimal stopping problems are studied by Krengel and Sucheston (1981) [9] and Tanaka (2007, 2006) [14] and [15]. In this paper an additive comparison in the case of finite stage multiparameter optimal stopping problems is given.     

Synthesis and properties of novel crown ether-annelated 4′,5′-diaza-9′-(1,3-dithiole-2-ylidene)-fluorenes and their ruthenium(II) complexes

Two novel redox-active 1,3-dithiole (DT) ring-fused 4,5-diazafluorene ligands with crown ether moieties (L1 and L2) were synthesized and characterized. The crystal structure of L1 was studied. The electrochemical and spectroscopic properties of these new ligands, as well as the corresponding bis(bipyridine)ruthenium(II) complexes [4: Ru L1(bpy)₂ and 5: Ru L2(bpy)₂], were also been investigated.