Oxotitanium(IV) complexes of some bis‐unsymmetric Schiff bases: Synthesis,structural elucidation and biomedical applications

A number of oxotitanium(IV) complexes of the type TiOL with bis‐unsymmetric dibasic tetradentate Schiff base (LH₂) containing ONNO donor atoms have been synthesized. Mono‐Schiff base (OPD‐HNP) was prepared by the condensation of 1:3 molar ratio of 2‐hydroxy‐1‐naphthaldehyde (HNP) with o‐phenylenediamine (OPD). Dibasic unsymmetric tetradentate diamine Schiff bases were prepared by the reaction of OPD‐HNP with 2‐hydroxyacetophenone, 2‐hydroxypropeophenone, benzoylacetone, acetylacetone and ethylacetoacetate. Further, titanylacetylacetonate was reacted with these ligands to obtain their metal complexes. On the basis of analytical and physiochemical data, the formation of complexes as TiOL was suggested having square pyramidal geometry. Quantum mechanical approach also confirmed this geometry. The assessment of the synthesized ligands and their complexes showed that some behave as good inhibitors of mycelial growth against selected phytopathogic fungi but weak inhibitors against some selected bacteria. A few of them also showed antioxidant properties.     

Synthesis,Spectroscopy, Semi‐empirical and Biological Activities of Organotin(IV) Complexes with o‐Isopropyl Carbonodithioic Acid

New organotin(IV) complexes have been synthesized by treating potassium o‐isopropyl carbonodithioate with R₂SnCl₂/R₃SnCl in 1 : 2/1 : 1 M/L ratio. All complexes have been characterized by IR and NMR (¹H, ¹³C) spectroscopy. IR results shows that ligand acts as bidentate which is also confirmed by semi‐empirical study. NMR data reveals four coordinated geometry in solution. Computed positive heat of formation shows that complex 5 is thermodynamically unstable. UV/visible spectroscopy was used to assess the mode of interaction and binding of the complexes with DNA which shows that complex 5 exhibits higher binding constant as compared to complex 3 . In protein kinase inhibition assay, compound 3 was found most active, while other biological activities shows that triorganotin(IV) complexes are biologically more active as compared to diorganotin(IV) complexes.     

Characterization of Glycan Structures of Chondroitin Sulfate-Glycopeptides Facilitated by Sodium Ion-Pairing and Positive Mode LC-MS/MS

Purification and liquid chromatography-tandem mass spectrometry (LC-MS/MS) characterization of glycopeptides, originating from protease digests of glycoproteins, enables site-specific analysis of protein N- and O-glycosylations. We have described a protocol to enrich, hydrolyze by chondroitinase ABC, and characterize chondroitin sulfate-containing glycopeptides (CS-glycopeptides) using positive mode LC-MS/MS. The CS-glycopeptides, originating from the Bikunin proteoglycan of human urine samples, had ΔHexAGalNAcGlcAGalGalXyl-O-Ser hexasaccharide structure and were further substituted with 0-3 sulfate and 0-1 phosphate groups. However, it was not possible to exactly pinpoint sulfate attachment residues, for protonated precursors, due to extensive fragmentation of sulfate groups using high-energy collision induced dissociation (HCD). To circumvent the well-recognized sulfate instability, we now introduced Na⁺ ions to form sodiated precursors, which protected sulfate groups from decomposition and facilitated the assignment of sulfate modifications. Sulfate groups were pinpointed to both Gal residues and to the GalNAc of the hexasaccharide structure. The intensities of protonated and sodiated saccharide oxonium ions were very prominent in the HCD-MS2 spectra, which provided complementary structural analysis of sulfate substituents of CS-glycopeptides. We have demonstrated a considerable heterogeneity of the bikunin CS linkage region. The realization of these structural variants should be beneficial in studies aimed at investigating the importance of the CS linkage region with regards to the biosynthesis of CS and potential interactions to CS binding proteins. Also, the combined use of protonated and sodiated precursors for positive mode HCD fragmentation analysis will likely become useful for additional classes of sulfated glycopeptides.

Open image in new window

Graphical Abstract ?

     

Theoretical and experimental studies of ion imprinted polymer for nitrate detection

Molecular imprinting is an approach to synthesize receptors with specific molecular recognition properties. A computational method was carried out to study interaction between template and monomer in prepolymerization mixture. The functional monomer and template complexes were optimized, at the minimum energy confirmation using Austin Model 1 semi empirical method within Restricted Hartree Fock formalism. The theoretical results showed that allylthiourea (functional monomer) has the largest interaction energy towards template (sodium nitrate) with the mole ratio of 4 : 1; functional monomer : template. The resulting polymers were characterized using Fourier Transform infrared spectroscopy, thermogravimetry analysis and field emission scanning electron microscopy. Rebinding experiments were carried out to evaluate binding capacity of the polymer. The adsorption data of ion imprinted polymer (IIP) were fitted with Langmuir-Freundlich isotherm model. Pseudo-second order kinetic model was used to describe the kinetic adsorption behavior of IIP. The experimental binding result showed good agreement with theoretical computation and the IIP was further used for nitrate ion detection. The results of membrane optimization indicated that the sensor, which composed of 30% polyvinylchloride, 60% nitrophenyl octyl ether as a plasticizer, 2% sodium tetraphenyl borate, and 10% IIP as ionophore exhibited an almost Nernstian slope with the limit of detection 3.9 × 10^-6 M. The fabricated sensor had shown good potential in nitrate detection with wide linear range, low limit of detection and found to have good selectivity towards nitrate ion over other anion.     

In vitro dielectrophoresis of HEK cell migration for stimulating chronic wound epithelialization

This article describes a dielectrophoresis (DEP)-based simulation and experimental study of human epidermal keratinocyte (HEK) cells for wounded skin cell migration toward rapid epithelialization. MyDEP is a standalone software designed specifically to study dielectric particles and cell response to an alternating current (AC) electric field. This method demonstrated that negative dielectrophoresis (N_DEP) occurs in HEK cells at a wide frequency range in highly conductive medium. The finite element method was used to characterize particle trajectory based on DEP and drag force. The performance of the system was assessed using HEK cells in a highly conductive EpiLife suspending medium. The DEP experiment was performed by applying sinusoidal wave AC potential at the peak-to-peak voltage of 10 V in a tapered aluminum microelectrode array from 100 kHz to 1 MHz. We experimentally observed the occurrence of NDEP, which attracted HEK cells toward the local electric field minima in the region of interest. The DIPP-MotionV software was used to track cell migration in the prerecorded video via an automatic marker and estimate the average speed and acceleration of the cells. The results showed that HEK cell migration was accomplished approximately at 6.43 μm/s at 100 kHz with 10 V, and F_DEP caused the cells to migrate and align at the target position, which resulted in faster wound closures because of the application of an electric field frequency to HEK cells in random locations.     

Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head Groups 2: Control of Surface Wetting in Self-Assembled Multilayer Films

A novel set of light-responsive polyelectrolytes has been developed and studied, to control and tune surface wettability by introducing various types of substituted R head-groups of azo polyelectrolytes in self-assembled multilayer (SAMU) films. As part of a larger project to develop polymer surfaces where one can exert precise control over properties important to proteins and cells in contact, photo-reversibly, we describe here how one can tune quite reliably the contact angle of a biocompatible SAMU, containing a photo-reversible azo chromophore for eventual directed cell growth. The azo polyelectrolytes described here have different substituted R head-group pairs of shorter-ionized hydrophilic COOH and SO₃H, shorter non-ionized hydrophobic H and OC₂H₅, and larger non-ionized hydrophobic octyl C₈H₁₇ and C₈F₁₇, and were employed as polyanions to fabricate the SAMU onto silicon substrates by using the counter-charge polycation PDAC. The prepared SAMU films were primarily characterized by measurement of their contact angles with water. The surface wetting properties of the thin films were found to be dependent on the type of substituted R-groups of the azo polyelectrolytes through their degree of ionization, size, hydrophobicity/hydrophilicity, solubility, conformation, and inter-polymeric association and intra-polymeric aggregation. All these factors appeared to be inter-related, and influenced variations in hydrophobic/hydrophilic character to different extents of aggregates/non-aggregates in solution because of solvation effects of the azo polyanions, and were thus manifested when adsorbed as thin films via the SAMU deposition process. For example, one interesting observation is significantly higher contact angles of 79° for SAMU films of larger octyl R groups of PAPEA-C₈F₁₇ and PAPEA-C₈H₁₇ than for others with contact angles of 64° observed for non-polar R-groups of OC₂H₅ and H. Furthermore, lower contact angle values of 59° for SAMU films with polar R-groups of COOH and SO₃H relative to that of non-polar R-groups are in accordance with their expected order of the hydrophilicity or hydrophobicity. It is possible that the large octyl groups are more effective in shielding the ionic functional groups on the substrate surface, and contributed less to the water drop-molecule interactions with ionic groups of the PDAC and/or AA groups. In addition, higher hydrophobicity of the SAMU films may be due to the incorporation of bulky and hydrophobic groups in these polyelectrolytes, which can produce aggregates on the surfaces of the SAMU films. Through understanding and controlling the complex aggregation behavior of the different substituted R-groups of these azo polyelectrolytes, and hence their adsorption on substrates, it appears possible to finely tune the surface energy of these biocompatible films over a wide range, enhance the photo-switching capabilities of the SAMU films, and tailor other surface properties for the development and application of new devices in diverse areas of microfluidics, specialty coatings, sensors, and biomedical sciences.     

[Ni(NHC)2] as a Scaffold for Structurally Characterized trans [H−Ni−PR2] and trans [R2P−Ni−PR2] Complexes

The addition of PPh₂H, PPhMeH, PPhH₂, P(para-Tol)H₂, PMesH₂ and PH₃ to the two-coordinate Ni⁰ N-heterocyclic carbene species [Ni(NHC)₂] (NHC=IiPr₂, IMe₄, IEt₂Me₂) affords a series of mononuclear, terminal phosphido nickel complexes. Structural characterisation of nine of these compounds shows that they have unusual trans [H−Ni−PR₂] or novel trans [R₂P−Ni−PR₂] geometries. The bis-phosphido complexes are more accessible when smaller NHCs (IMe₄>IEt₂Me₂>IiPr₂) and phosphines are employed. P−P activation of the diphosphines R₂P−PR₂ (R₂=Ph₂, PhMe) provides an alternative route to some of the [Ni(NHC)₂(PR₂)₂] complexes. DFT calculations capture these trends with P−H bond activation proceeding from unconventional phosphine adducts in which the H substituent bridges the Ni−P bond. P−P bond activation from [Ni(NHC)₂(Ph₂P−PPh₂)] adducts proceeds with computed barriers below 10 kcal mol⁻¹. The ability of the [Ni(NHC)₂] moiety to afford isolable terminal phosphido products reflects the stability of the Ni−NHC bond that prevents ligand dissociation and onward reaction.     

Effects of polyvinylpyrrolidone on structural and optical properties of willemite semiconductor nanoparticles by polymer thermal treatment method

Journal of Thermal Analysis and Calorimetry - Willemite is an inorganic semiconductor material used for optoelectronic applications. The present study purposes a new polymer thermal treatment...