Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites

The structural-phase state of the contact zone and the factors that influence on the strength of diamond retention in the diamond carbide composites were determined. Composites were obtained by the new hybrid technology that eliminates the reheating of the metalized coating. The elaborated technology combines the thermal diffusion metallization of a diamond and the sintering by the scheme of self-dosed impregnation in a one-stage technological cycle. By the methods of electron microscopy, X-ray diffraction analysis, and Raman spectroscopy the structural and phase characteristics of the interphase boundary were investigated. The improvement of chemical and mechanical adhesion between the diamond and carbide matrix was obtained. It was shown that the specific productivity of the samples with a metalized diamond component is 39% higher than those without metallization.     

Ultrafast gas chromatography coupled to electronic nose to identify volatile biomarkers in exhaled breath from chronic obstructive pulmonary disease patients: A pilot study

An analytical method to identify volatile organic compounds (VOCs) in the exhaled breath from patients with a diagnosis of chronic obstructive pulmonary disease (COPD) using a ultrafast gas chromatography system equipped with an electronic nose detector (FGC eNose) has been developed. A prospective study was performed in 23 COPD patients and 33 healthy volunteers; exhalation breathing tests were performed with Tedlar bags. Each sample was analyzed by FCG eNose and the identification of VOCs was based on the Kovats index. Raw data were reduced by principal component analysis (PCA) and canonical discriminant analysis [canonical analysis of principal coordinates (CAP)]. The FCG eNose technology was able to identify 17 VOCs that distinguish COPD patients from healthy volunteers. At all stages of PCA and CAP the discrimination between groups was obvious. Chemical prints were correctly classified up to 82.2%, and were matched with 78.9% of the VOCs detected in the exhaled breath samples. Receiver operating characteristic curve analysis indicated the sensitivity and specificity to be 96% and 91%, respectively. This pilot study demonstrates that FGC eNose is a useful tool to identify VOCs as biomarkers in exhaled breath from COPD patients. Further studies should be performed to enhance the clinical relevance of this quick and ease methodology for COPD diagnosis.     

Spatio-Temporal Variation of the Bacterial Communities along a Salinity Gradient within a Thalassohaline Environment (Saline di Tarquinia Salterns,Italy)

The “Saline di Tarquinia” salterns have been scarcely investigated regarding their microbiological aspects. This work studied the structure and composition of their bacterial communities along the salinity gradient (from the nearby sea through different ponds). The communities showed increasing simplification of pond bacterial diversity along the gradient (particularly if compared to those of the sea). Among the 38 assigned phyla, the most represented were Proteobacteria, Actinobacteria and Bacteroidetes. Differently to other marine salterns, where at the highest salinities Bacteroidetes dominated, preponderance of Proteobacteria was observed. At the genus level the most abundant taxa were Pontimonas, Marivita, Spiribacter, Bordetella, GpVII and Lentibacter. The α-diversity analysis showed that the communities were highly uneven, and the Canonical Correspondence Analysis indicated that they were structured by various factors (sampling site, sampling year, salinity, and sampling month). Moreover, the taxa abundance variation in relation to these significant parameters were investigated by Generalized Linear Models. This work represents the first investigation of a marine saltern, carried out by a metabarcoding approach, which permitted a broad vision of the bacterial diversity, covering both a wide temporal span (two years with monthly sampling) and the entire salinity gradient (from the nearby sea up to the crystallisation ponds).     

Periodic solutions to some problems of n-body type

We prove the existence of at least one T-periodic solution to a dynamical system of the type $$ - m_i \ddot u_i = \sum\limits_{j = 1,j \ne i}^n {\triangledown V_{ij} (u_i - u_j ,{\text{ }}t)}$$ (1) where the potentials V _ij are T-periodic in t and singular at the origin, u _i ε R ^k i=1, ..., n, and k≧3. We also provide estimates on the H ¹ norm of this solution. The proofs are based on a variant of the Ljusternik-Schnirelman method. The results here generalize to the n-body problem some results obtained by Bahri & Rabinowitz on the 3-body problem in [6].     

PopGen: population-based recruitment of patients and controls for the analysis of complex genotype-phenotype relationships

OBJECTIVE: Patient samples used for mapping complex human disease genes are unlikely to be representative of the phenotype spectrum of the respective population as a whole. On the other hand, most ongoing prospective studies are probably too small for evaluating polygenic disease markers. DESIGN: Precise estimates of population-specific genotypic risks can be obtained efficiently through the complete ascertainment of patients in a geographically confined area. The PopGen project uses the most northern part of Germany as a target region for such a pursuit. RESULTS: PopGen currently pursues recruitment, sampling and processing activities in close collaboration with a multitude of clinical partners, covering cardiovascular, neuropsychiatric and environmental diseases. CONCLUSION: PopGen has successfully established itself as a large-scale genetic epidemiological project of international recognition.     

Isolation and Characterization of Cellulosic Pulp Fines and Their Interactions with Cationic Polyacrylamides

Four different types of cellulosic fines were isolated from refiner mechanical and kraft pulp samples to characterize their chemical and physical properties. The pulp fines were flocculated using four different types of cationically modified polyacrylamides. The extent of flocculation was observed with multiple light scattering apparatus. The maximum adsorption of the polyelectrolytes on the pulp fines was determined by polyelectrolyte titration. It was concluded that it is the combination of the molar mass and the charge density of a polyelectrolyte, as well as the origins and characteristics of the fines which define the adsorption and flocculation behavior. None of these properties alone could fully describe these phenomena, but the molar mass of the polyelectrolyte was the predominant factor. The most important fines characteristics were the charge properties and the microstructure.     

Comparison of phantom materials for use in quality assurance of microbeam radiation therapy

Microbeam radiation therapy (MRT) is a promising radiotherapy modality that uses arrays of spatially fractionated micrometre‐sized beams of synchrotron radiation to irradiate tumours. Routine dosimetry quality assurance (QA) prior to treatment is necessary to identify any changes in beam condition from the treatment plan, and is undertaken using solid homogeneous phantoms. Solid phantoms are designed for, and routinely used in, megavoltage X‐ray beam radiation therapy. These solid phantoms are not necessarily designed to be water‐equivalent at low X‐ray energies, and therefore may not be suitable for MRT QA. This work quantitatively determines the most appropriate solid phantom to use in dosimetric MRT QA. Simulated dose profiles of various phantom materials were compared with those calculated in water under the same conditions. The phantoms under consideration were RMI457 Solid Water (Gammex‐RMI, Middleton, WI, USA), Plastic Water (CIRS, Norfolk, VA, USA), Plastic Water DT (CIRS, Norfolk, VA, USA), PAGAT (CIRS, Norfolk, VA, USA), RW3 Solid Phantom (PTW Freiburg, Freiburg, Germany), PMMA, Virtual Water (Med‐Cal, Verona, WI, USA) and Perspex. RMI457 Solid Water and Virtual Water were found to be the best approximations for water in MRT dosimetry (within ±3% deviation in peak and 6% in valley). RW3 and Plastic Water DT approximate the relative dose distribution in water (within ±3% deviation in the peak and 5% in the valley). PAGAT, PMMA, Perspex and Plastic Water are not recommended to be used as phantoms for MRT QA, due to dosimetric discrepancies greater than 5%.     

Solvent‐Dependent Structure of the I3− Ion Derived from Photoelectron Spectroscopy and Ab Initio Molecular Dynamics Simulations

Ab initio molecular dynamics (MD) simulations of the solvation of LiI₃ in four different solvents (water, methanol, ethanol, and acetonitrile) are employed to investigate the molecular and electronic structure of the I₃^? ion in relation to X‐ray photoelectron spectroscopy (XPS). Simulations show that hydrogen‐bond rearrangement in the solvation shell is coupled to intramolecular bond‐length asymmetry in the I₃^? ion. By a combination of charge analysis and I 4 d core‐level XPS measurements, the mechanism of the solvent‐induced distortions has been studied, and it has been concluded that charge localization mediates intermolecular interactions and intramolecular distortion. The approach involving a synergistic combination of theory and experiment probes the solvent‐dependent structure of the I₃^? ion, and the geometric structure has been correlated with the electronic structure.     

Inter-laboratory exercise with an aim to compare methods for 90Sr and 239,240Pu determination in environmental soil samples

In order to deliver reliable results for a multitude of different scenarios, e.g. emergency preparedness, environmental monitoring, nuclear decommissioning and waste management, there is a constant process of method development in the field of radioanalytical chemistry. This work presents the results of a method comparison exercise aimed at quantifying ⁹⁰Sr and ^239,240Pu in environmental soil samples, with the intention of evaluating the performance and applicability of different methods. From the methods examined in this work, recommendations are given in order to find a radioanalytical measurement procedure, for ⁹⁰Sr and ^239,240Pu analysis, which is fit-for-purpose for a particular scenario.