Factors affecting the market penetration of biomass-derived liquid transportation fuels

Applied Biochemistry and Biotechnology - The market for liquid transportation fuels in the United States is about 610×109 L (160×109 gal) annually, with gasoline accounting for about...     

Iron chelation properties of an extracellular siderophore exochelin MN

The coordination chemistry of an extracellular siderophore produced by Mycobacterium neoaurum, exochelin MN (ExoMN), is reported along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous solution speciation as determined by spectrophotometric and potentiometric titration techniques. Exochelin MN is of particular interest as it can efficiently transport iron into pathogenic M. leprae, which is responsible for leprosy, in addition to its own parent cells. The Fe(III) coordination properties of ExoMN are important with respect to understanding the Fe(III) acquisition and uptake mechanism in pathogenic M. leprae, as the siderophores from this organism are very difficult to isolate. Exochelin MN has two hydroxamic acid groups and an unusual threo-beta-hydroxy-l-histidine available for Fe(III) chelation. The presence of threo-beta-hydroxy-l-histidine gives rise to a unique mode of Fe(III) coordination. The pK(a) values for the two hydroxamic acid moieties, the histidine imidazole ring and the alkylammonium groups on ExoMN, correspond well with the literature values for these moieties. Proton-dependent Fe(III)- and Fe(II)-ExoMN equilibrium constants were determined using a model involving sequential protonation of the Fe(III)- and Fe(II)-ExoMN complexes. These data were used to develop a model whereby deprotonation reactions on the surface of the complex in the second coordination shell result in first coordination shell isomerization. The overall formation constants were calculated: log beta(110) = 39.12 for Fe(III)-ExoMN and 16.7 for Fe(II)-ExoMN. The calculated pFe value of 31.1 is one of the highest among all siderophores and their synthetic analogues and indicates that ExoMN is thermodynamically capable of removing Fe(III) from transferrin. The E(1/2) for the Fe(III)ExoMN/Fe(II)ExoMN(-) couple was determined to be -595 mV from quasi-reversible cyclic voltammograms at pH = 10.8, and the pH-dependent E(1/2) profile was used to determine the Fe(II)-ExoMN protonation constants.     

Fe(III) coordination properties of a new saccharide-based exocyclic trihydroxamate analogue of ferrichrome

The coordination chemistry of a saccharide-based ferrichrome analogue, 1-O-methyl-2,3,4-tris-O-[4-(N-hydroxy-N-methylcarbamoyl)-n-butyrate]-alpha-d-glucopyranoside (H(3)L), is reported, along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous-solution speciation as determined by spectrophotometric and potentiometric titration techniques. The use of a saccharide platform to synthesize a hexadentate trihydroxamic acid chelator provides some advantages over other approaches to ferrichrome models, including significant water solubility and hydrogen-bonding capability of the backbone that can potentially provide favorable receptor recognition and biological activity. The pK(a) values for the hydroxamate moieties were found to be similar to those of other trihydroxamates. Proton-dependent Fe(III)-H(3)L and Fe(II)-H(3)L equilibrium constants were determined using a model involving the sequential protonation of the iron(III)- and iron(II)-ligand complexes. These results were used to calculate the formation constants, log beta(110) = 31.86 for Fe(III)L and 12.1 for Fe(II)L(-). The calculated pFe value of 27.1 indicates that H(3)L possesses an Fe(III) affinity comparable to or greater than those of ferrichrome and other ferrichrome analogues and is thermodynamically capable of removing Fe(III) from transferrin. E(1/2) for the Fe(III)L/Fe(II)L(-) couple was determined to be -436 mV from quasi-reversible cyclic voltammograms at pH = 9, and the pH-dependent E(1/2) profile was used to determine the Fe(II)L(-) protonation constants.     

1,1,1,1-Tetrakis(o-fluorophenylamino)silane tris[titanium(IV) chloride]. Evidence for a new titanium cation [Ti2Cl7]+

Si(NHC₆H₄F-o)₄ · 3TiCl₄ (1) has been obtained from the disproportionation of (CF₃CH₂O)₃SiNHC₆H₄F-o and TiCl₄ in petroleum ether (40–60 °C) at –10 °C. The analytical (elemental analysis, molar conductance) and spectral (i.r., ¹H- and ¹⁹F-n.m.r.) data suggested that (1) behaves as [Si(NHC₆H₄F-o)₄ · Ti₂Cl₇]⁺ [TiCl₅]^–. The presence of these ions has been confirmed by characterising the products of metathetical reactions of (1) with R₄NX (R = Bu and Et; X = I and Br) and with AgNO₃. The data suggest the presence of a new titanium cation [Ti₂Cl₇]⁺.     

Electrochemical and chemical polymerization of acrylamide

The electrochemical and chemical polymerization of acrylamide (AA) has been studied. The electrolysis of the monomer in N,N-dimethylformamide (DMF) containing (C₄H₉)₄NClO₄ as the supporting electrolyte leads to polymer formation in both anode and cathode compartments. The cathodic polymer dissolves in the reaction mixture and the anodic polymer precipitates during the course of polymerization. A plausible mechanism for the anodic and cathodic initiation reaction has been given. The chemical polymerization of acrylamide that has been initiated by HClO₄ is analogous to its anodic polymerization. The polymer yield increases with an increase in concentration of the monomer and HClO₄. Raising the reaction temperature also enhances the polymerization rate. The overall apparent activation energy of the polymerization was determined to be ca. 19 kcal/mole. The copolymerization of acrylamide was carried out with methyl methacrylate (MMA) in a solution of HClO₄ in DMF. The reactivity ratios are r₁ (AA) = 0.25 and r₂ = 2.50. The polymerization with HClO₄ appears to be by a free radical mechanism. When the polymerization of acrylamide is carried out with HClO₄ in H₂O, a crosslinked water-insoluble gel formation takes place.     

Iodine-catalyzed cycloalkenylation of dihydroquinolines and arylamines through a reaction with cyclic ketones under neat conditions

An iodine-catalyzed direct cycloalkenylation of dihydroquinolines and arylamines has been developed. This method consists of a Friedel–Crafts reaction between dihydroquinolines (or arylamines) and cyclic ketones in which the double bond is selectively generated throughout the course of the reaction resulting in a direct cycloalkenylation, under neat conditions.     

Chitosan hydrochloride mediated efficient,green catalysis for the synthesis of perimidine derivatives

Chitosan hydrochloride as biopolymer‐based, renewable, and recyclable heterogeneous catalyst was used for efficient one‐pot synthesis of perimidine derivatives. This newly developed greener methodology provides a very simple and greener route for the synthesis of perimidines in short time with excellent yield.     

HPLC–PDA identification and resolution of rufinamide forced degradation impurities: A congregated chemometric expedite optimization coupled with factorials and desirability

Rufinamide is used presently to treat Lenaux–Gastaut syndrome. A full factorial design and desirability approach was investigated for the optimization of hydrolytic stress via response surface curves (RSCs). The degradation impurities were identified and resolved using reversed-phase high-performance liquid chromatography (RP-HPLC) on the Qualisil® BDS C₈ column. Acetonitrile–water (29:71, v/v) was optimized for the mobile phase and used at a flow rate of 1.0 ml/min with detection at a wavelength of 230 nm. Rufinamide showed appreciable susceptibility to hydrolysis under acidic and alkaline stress, and substantial degradation in the neutral condition. It degraded much less under oxidative stress. Exposure towards thermal and photolytic stress conditions indicated appreciable stability. The developed method was subjected to validation as per the recommendations of the International Conference on Harmonization. The proposed method showed no influence from the excipients and the degradation products. As well as good precision and accuracy in determination, the method showed a linear response between 2 and 12 μg ml⁻¹. The method was extended for determination in a human plasma sample, which resulted in excellent recovery without interference from matrix effects. The combined use of desirability and design for the optimization of acidic and alkaline hydrolytic stress led to simple and rapid analysis.     

Terahertz imaging through self-mixing in a quantum cascade laser

We demonstrate terahertz (THz) frequency imaging using a single quantum cascade laser (QCL) device for both generation and sensing of THz radiation. Detection is achieved by utilizing the effect of self-mixing in the THz QCL, and, specifically, by monitoring perturbations to the voltage across the QCL, induced by light reflected from an external object back into the laser cavity. Self-mixing imaging offers high sensitivity, a potentially fast response, and a simple, compact optical design, and we show that it can be used to obtain high-resolution reflection images of exemplar structures.