A simple flow injection-reduced volume column system for hemoglobin typing

A flow injection (FI)-reduced volume column system was developed for hemoglobin (Hb) typing to be used as an initial screening method for thalassemia. The column was packed with 140 μl diethylaminoethyl (DEAE)-Sephadex A-50 ion exchange beads. Hb can be separated using Tris–HCl buffer solution with pH gradient 8.5–6.5 and then monitored spectrophotometrically at 415 nm. The hemolysate of 40 blood samples from packed red cells were screened for thalassemia by determining the amount of HbA₂ and HbE present. The proposed system was able to predict positive test results from those samples with β, E-trait and EE homozygous thalassemia, Hb types that were independently identified following the conventional method at the hospital laboratory. Advantages of the proposed system over the conventional column technique include low amount of reagents and blood sample needed, short analysis time and low cost. Each analysis required only 80 μl of 50 times diluted packed cells, which is equivalent to 1.6 μl undiluted packed cells, and it can be completed in only 35 min. This simple FI-reduced volume column system was demonstrated to be an economic alternative system for Hb typing to initially screen some types of thalassemia such as β-trait, E-trait and EE-homozygous which are commonly found in Thailand.     

Flow Injection/Sequential Injection Chromatography: A Review of Recent Developments in Low Pressure with High Performance Chemical Separation

This review focuses on the developments of the various parts of instrumentation and the operation of low to medium pressure flow injection and sequential injection chromatography (FIC and SIC) systems. The report and discussion include solution delivery system, separation column, flow cell and detector, mobile phase management, and online sample pretreatment. Applications of FIC and SIC and their differences as compared to HPLC are also presented.     

Mechanistic Insights into the Pd‐Catalyzed Direct Amination of Allyl Alcohols: Evidence for an Outer‐Sphere Mechanism Involving a Palladium Hydride Intermediate

The mechanism of direct amination of allyl alcohol by a palladium triphenylphosphite complex has been explored. Labelling studies show that the reaction proceeds through a π‐allylpalladium intermediate. A second‐order dependence of reaction rate on allyl alcohol concentration was observed. Kinetic isotope effect studies and ESI‐MS studies are in agreement with a reaction proceeding through a palladium hydride intermediate in which both O–H bond and C–O bond cleavages are involved in rate‐determining steps. A stereochemical study supports an outer‐sphere nucleophilic attack of the π‐allylpalladium intermediate giving complete chiral transfer from starting material to product.     

Flow based immuno/bioassay and trends in micro-immuno/biosensors

The term immuno/bioassay refers to analytical techniques that utilize the specific molecular recognition between antibodies and antigens or between biomolecules and specific receptors. Features such as high selectivity and low sample consumption make them very useful for analysis of samples with complex matrices. However, immuno/bioassays involve time-consuming (multi-step) operations which usually consist of steps of multiple incubation and washing. These are tedious and may result in large errors. Automatted immuno/bioassay systems can ease and shorten these processes and thus are highly beneficial. The hyphenation of flow-based techniques (i.e. flow injection related techniques and micro-fluidic systems) with immuno/bioassay protocols paves a new way for performing such assays. Compared to conventional micro-plate formats, flow-based immuno/bioassays can reduce the time needed for analysis, the volumes of samples and reagents consumed, and the need for trained personnel. In order to transform immuno/bioassays from conventional to flow-based formats, the solid surfaces used for the immobilization step has to be changed in order to meet the specific requirements of flow systems. To further develop the on-site analytical systems in micro-fluidic platforms, improvements in detection methods are necessary for high-sensitivity and rapid measurement. This review overviews the advantages and disadvantages of flow-based immuno/bioassay formats, the various types of solid surfaces for immobilization, and the methods of detection. Trends to improve sensitivity, speed and robustness are emphasized.     

The influence of mixed activators on ethylene polymerization and ethylene/1-hexene copolymerization with silica-supported Ziegler-Natta catalyst

This article reveals the effects of mixed activators on ethylene polymerization and ethylene/1-hexene copolymerization over MgCl?/SiO?-supported Ziegler-Natta (ZN) catalysts. First, the conventional ZN catalyst was prepared with SiO? addition. Then, the catalyst was tested for ethylene polymerization and ethylene/1-hexene (E/H) co-polymerization using different activators. Triethylaluminum (TEA), tri-n-hexyl aluminum (TnHA) and diethyl aluminum chloride (DEAC), TEA+DEAC, TEA+TnHA, TnHA+ DEAC, TEA+DEAC+TnHA mixtures, were used as activators in this study. It was found that in the case of ethylene polymerization with a sole activator, TnHA exhibited the highest activity among other activators due to increased size of the alkyl group. Further investigation was focused on the use of mixed activators. The activity can be enhanced by a factor of three when the mixed activators were employed and the activity of ethylene polymerization apparently increased in the order of TEA+ DEAC+TnHA > TEA+DEAC > TEA+TnHA. Both the copolymerization activity and crystallinity of the synthesized copolymers were strongly changed when the activators were changed from TEA to TEA+DEAC+TnHA mixtures or pure TnHA and pure DEAC. As for ethylene/1-hexene copolymerization the activity apparently increased in the order of TEA+DEAC+TnHA > TEA+TnHA > TEA+DEAC > TnHA+DEAC > TEA > TnHA > DEAC. Considering the properties of the copolymer obtained with the mixed TEA+DEAC+TnHA, its crystallinity decreased due to the presence of TnHA in the mixed activator. The activators thus exerted a strong influence on copolymer structure. An increased molecular weight distribution (MWD) was observed, without significant change in polymer morphology.     

Low-Pressure Chromatographic Separation of p-Hydroxybenzoates Using Sequential Injection with Lab-on-Valve System and Miniature Monolithic Column

The use of a small guard column (5-mm length) as a miniature analytical column in low-pressure liquid chromatography based on a sequential injection with lab-on-valve system was demonstrated. A strong initial mobile phase was used to rapidly deliver the sample zone to the column prior to simultaneous separation of analytes with weaker mobile phase. Separation of methyl-, ethyl-, propyl-, and butyl-4-hydroxybenzoates (MP, EP, PP, and BP) was achieved within about 120 s with sufficient peak resolution (all higher than 1.3) using 2,500 µL of mobile phase (composed of 1,087 µL of MeOH) per run. Detection limits were found to be 6.5, 8.0, 0.5, and 0.6 μmol L^?1 for MP, EP, PP, and BP, respectively. The system was tested with common commercially available skin lotions and wet wipe products. The analysis results were in good agreement with those obtained from the high-performance liquid chromatography with a 10-cm-length packed column.     

Statistical Optimization of 1,3-Propanediol (1,3-PD) Production from Crude Glycerol by Considering Four Objectives: 1,3-PD Concentration,Yield, Selectivity,and Productivity

This study investigated the biological conversion of crude glycerol generated from a commercial biodiesel production plant as a by-product to 1,3-propanediol (1,3-PD). Statistical analysis was employed to derive a statistical model for the individual and interactive effects of glycerol, (NH₄)₂SO₄, trace elements, pH, and cultivation time on the four objectives: 1,3-PD concentration, yield, selectivity, and productivity. Optimum conditions for each objective with its maximum value were predicted by statistical optimization, and experiments under the optimum conditions verified the predictions. In addition, by systematic analysis of the values of four objectives, optimum conditions for 1,3-PD concentration (49.8 g/L initial glycerol, 4.0 g/L of (NH₄)₂SO₄, 2.0 mL/L of trace element, pH 7.5, and 11.2 h of cultivation time) were determined to be the global optimum culture conditions for 1,3-PD production. Under these conditions, we could achieve high 1,3-PD yield (47.4%), 1,3-PD selectivity (88.8%), and 1,3-PD productivity (2.1/g/L/h) as well as high 1,3-PD concentration (23.6 g/L).     

Hydrolytic Methods for the Quantification of Fructose Equivalents in Herbaceous Biomass

A low, but significant, fraction of the carbohydrate portion of herbaceous biomass may be composed of fructose/fructosyl-containing components (“fructose equivalents”); such carbohydrates include sucrose, fructooligosaccharides, and fructans. Standard methods used for the quantification of structural-carbohydrate-derived neutral monosaccharide equivalents in biomass are not particularly well suited for the quantification of fructose equivalents due to the inherent instability of fructose in conditions commonly used for hemicellulose/cellulose hydrolysis (>80% degradation of fructose standards treated at 4% sulfuric acid, 121°C, 1 h). Alternative time, temperature, and acid concentration combinations for fructan hydrolysis were considered using model fructans (inulin, β-2,1, and levan, β-2,6) and a grass seed straw (tall fescue, Festuca arundinacea) as representative feedstocks. The instability of fructose, relative to glucose and xylose, at higher acid/temperature combinations is demonstrated, all rates of fructose degradation being acid and temperature dependent. Fructans are shown to be completely hydrolyzed at acid concentrations well below that used for the structural carbohydrates, as low as 0.2%, at 121°C for 1 h. Lower temperatures are also shown to be effective, with corresponding adjustments in acid concentration and time. Thus, fructans can be effectively hydrolyzed under conditions where fructose degradation is maintained below 10%. Hydrolysis of the β-2,1 fructans at temperatures ≥50°C, at all conditions consistent with complete hydrolysis, appears to generate difructose dianhydrides. These same compounds were not detected upon hydrolysis of levan, sucrose, or straw components. It is suggested that fructan hydrolysis conditions be chosen such that hydrolysis goes to completion; fructose degradation is minimized, and difructose dianhydride production is accounted for.     

Atropisomeric myristinins: selective COX-2 inhibitors and antifungal agents from Myristica cinnamomea

The first naturally occurring atropisomeric flavans, myristinins B (2), C (2a), E (4), and F (4a), together with their corresponding trans-isomers, myristinins A (1) and D (3), were isolated from the CH(2)Cl(2) extract of Myristica cinnamomea fruits. Compounds 1, the mixture of 2 and 2a, and the mixture of 4 and 4a, exhibited antifungal activity against Candida albicans with IC(50) values ranging from 5.9 to 8.8 microg/mL, and they selectively inhibited the enzyme cyclooxygenase-2 (COX-2).     

Review on screening and analysis techniques for hemoglobin variants and thalassemia

Thalassemia involves gene mutation that causes the production of an insufficient amount of normal structure globin chains while Hb variant involves gene mutation that causes the change in type or number of amino acid of the globin chain. It has been reported that some 200 million people worldwide had hemoglobinopathies of some sort. Attempts to develop effective and economical techniques for screening and analysis of thalassemia and Hb variants have become very important. In this review, we report the different techniques available, ranging from initial screening to extensive analysis, comparing advantages and disadvantages. Some indirect studies related to thalassemia indication and treatment follow-up are also included. We hope that information on these various techniques would be useful for some scientists who are working on development of a new technique or improving the existing ones.