An Inexact Modified Newton Method for Viscc and Application in Grasping Force

Acta Mathematicae Applicatae Sinica, English Series - For the variational inequality with symmetric cone constraints problem, we consider using the inexact modified Newton method to efficiently...     

Exploring the latest Pantheon SN Ia dataset by using three kinds of statistics techniques

In this work, we explore the cosmological consequences of the latest Type Ia supernova (SN Ia)dataset, Pantheon, by adopting the wCDM model. The Pantheon dataset currently contains the largest number of SN Ia samples, which contains 1048 supernovae on the redshift range0 z 2.3. Here we take into account three kinds of SN Ia statistics techniques, including:(1) magnitude statistics (MS), which is the traditional SN Ia statistics technique;(2) flux statistics(FS), which is based on the flux-averaging (FA) method; and (3) improved flux statistics (IFS),which combines the advantages of MS and FS. It should be mentioned that the IFS technique needs to scan the (zcut,Δz) parameters plane, where zcutandΔz are redshift cut-off and redshift interval of FA, respectively. The results are as follows.(1) Using the SN dataset only, the best FA recipe for IFS is (zcut,Δz)=(0.1, 0.08);(2) comparing to the old SN dataset, JLA, adopting the Pantheon dataset can reduce the 2σerror bars of equation of state w by 38%, 47%and 53%for MS, FS and IFS, respectively;(3) FS gives closer results to other observations, such as Baryon acoustic oscillations and cosmic microwave background;(4) compared with FS and IFS,MS more favors a Universe that will end in a ‘big rip’.     

基于CARS技术的超燃冲压发动机点火过程温度测量

相干anti-Stokes Raman散射（coherent anti-Stokes Raman scattering，CARS）技术作为一种非接触测量手段，已广泛应用于多种发动机模型燃烧室温度测量及地面试验.然而，目前的工作主要集中在稳态燃烧场温度的测量，缺乏用高分辨率的单脉冲来测量瞬变的燃烧火焰温度及组分浓度的研究.基于CARS理论，结合多参数拟合算法，开发了基于MATLAB的CARS光谱计算和拟合程序CARSCF；利用McKenna平面火焰炉在不同工况下进行了温度测量，并与DLR测量结果进行对比，结果显示开发的CARSCF具有较高的测量重复性和准确性；最后将CARS技术应用于测量超燃冲压发动机点火过程中的温度测量，获取了点火过程中的温度.结果显示，在来流Mach数为3的条件下，H₂/air点火过程中温度呈现急剧上升然后缓慢下降，而CARS信号则呈现急剧上升然后急剧下降随后又缓慢上升的趋势，并且在点火过程中最高温度为1 511 K.      

Domino Radical Addition/Oxidation Sequence with Photocatalysis: One‐Pot Synthesis of Polysubstituted Furans from α‐Chloro‐Alkyl Ketones and Styrenes

A new domino reaction has been developed that allows the combination of styrenes and α‐alkyl ketone radicals to afford a wide array of polysubstituted furans in good to excellent yields under mild and simple reaction conditions. The key to success of this novel protocol is the use of photocatalyst fac‐Ir(ppy)₃ and oxidant K₂S₂O₈. Mechanistic studies by a radical scavenger and photoluminescence quenching suggest that a radical addition/oxidation pathway is operable.     

激光雷达扫描方式

为实现激光束对空域的有效扫描和探测,研究了栅形扫描、李萨茹形扫描、螺旋形扫描和六边形扫描四种常见的激光雷达扫描方式,推导了相应的扫描方程,讨论了参数的物理意义及调整方法;重点研究了栅形扫描和六边形扫描方式下光斑的分布情况,通过仿真分析了两种扫描方式下光束的漏扫率和重叠率,结果表明,在相同扫描条件下六边形扫描方式的漏扫区域最少。展示了基于上述研究内容的扫描控制系统实物图及扫描图案。分析总结了四种扫描方式的特点,给出了每种扫描方式的适用情况及使用建议。     

利用电磁法研究HMX与TATB混合钝感炸药的冲击起爆特性

为研究含有少量奥克托金(HMX)且以三氨基三硝基苯(TATB)为基的高能钝感炸药PBX-3的冲击起爆反应增长规律,采用火炮驱动蓝宝石飞片的方法和铝基组合式电磁粒子速度计技术进行了一维平面冲击实验。通过实验测量撞击表面及内部不同深度处的冲击波后粒子速度,得到PBX-3炸药的Hugoniot关系。根据冲击波示踪器所测数据绘制了炸药到爆轰的时间-距离(x-t)图,获得了反映炸药冲击起爆性能的Pop关系。将入射压力为12.964 GPa时达到爆轰的6条速度曲线修整成相同零点,通过读取6条曲线的分离点即反应区末端的C-J点,计算出化学反应区时间和宽度。     

Synthesis,characterization, and some electrocatalytic properties of heteromultinuclear FeI/RuII Clusters

A series of new heteromultinuclear Fe^I/Ru^II clusters are described. The complexes (η⁶-arene)RuFe₂S₂(CO)₆ (arene = p-cymene 1 , C₆Me₆ 2 ) and Fe₂[μ-S (Cp*Ru)(CO)₂]₂(CO)₆ (Cp* = η⁵-C₅Me₅) ( 3 ) were prepared by the reduction reactions of (μ-S)₂Fe₂(CO)₆ with 2 equiv of LiHBEt₃, followed by treatment (μ-SLi)₂Fe₂(CO)₆ with ruthenium-arene complexes Ru₂(μ-Cl)₂Cl₂(η⁶-arene)₂ or Cp*Ru (CO)₂Cl in 22–33% yields. Further reactions of 1 and 2 with 1 equiv of triphenylphosphine in the presence of the decarbonylating agent Me₃NO·2H₂O, afforded the corresponding monophosphine-substituted Fe^I/Ru^II complexes (η⁶-arene)RuFe₂S₂(CO)₅(Ph₃P) (arene = p-cymene 4 , C₆Me₆ 5 ) in 75% and 78% yields. While treatment of parent complex 1 or 2 with 1 equiv of diphosphine Ph₂PCH₂PPh₂ (dppm) in xylene at reflux temperature resulted in the formation of the diphosphine-bridged RuFe₂S₂(CO)₉ derivate RuFe₂S₂(CO)₇(dppm) ( 6 ). The possible pathway for the formation was proposed. Two isomers of novel macrocyclic complexes involve the (η⁶-arene) Ru-bridged quadruple-butterfly Fe/S clusters [{μ-S (CH₂)₃S-μ}{(μ-CS₂)Fe₂(CO)₆}₂]₂[(η⁶-arene)Ru]₂ (arene = p-cymene 7a and 7b , C₆Me₆ 8a and 8b ) were isolated by reactions of two μ-CS₂-containing dianion [{μ-S (CH₂)₃S-μ}{(μ-S=CS)Fe₂(CO)₆}₂]²⁻ with [Ru₂(μ-Cl)₂Cl₂(η⁶-arene)₂], in which the propylene groups are attached to two S atoms by ee and ea types of bonds respectively. All the new complexes 1 – 8 have been characterized by elemental analysis, spectroscopy, and particularly for 1 – 6 , 7b and 8a by X-ray crystallography. In addition, the electrochemical properties of representative complexes 1 – 4 and 6 have been investigated.     

Hierarchical Hollow-Nanocube Ni−Co Skeleton@MoO3/MoS2 Hybrids for Improved-Performance Lithium-Ion Batteries

Improving the performance of anode materials for lithium-ion batteries (LIBs) is a hotly debated topic. Herein, hollow Ni−Co skeleton@MoS₂/MoO₃ nanocubes (NCM-NCs), with an average size of about 193 nm, have been synthesized through a facile hydrothermal reaction. Specifically, MoO₃/MoS₂ composites are grown on Ni−Co skeletons derived from nickel–cobalt Prussian blue analogue nanocubes (Ni−Co PBAs). The Ni−Co PBAs were synthesized through a precipitation method and utilized as self-templates that provided a larger specific surface area for the adhesion of MoO₃/MoS₂ composites. According to Raman spectroscopy results, as-obtained defect-rich MoS₂ is confirmed to be a metallic 1T-phase MoS₂. Furthermore, the average particle size of Ni−Co PBAs (≈43 nm) is only about one-tenth of the previously reported particle size (≈400 nm). If assessed as anodes of LIBs, the hollow NCM-NC hybrids deliver an excellent rate performance and superior cycling performance (with an initial discharge capacity of 1526.3 mAh g⁻¹ and up to 1720.6 mAh g⁻¹ after 317 cycles under a current density of 0.2 A g⁻¹). Meanwhile, ultralong cycling life is retained, even at high current densities (776.6 mAh g⁻¹ at 2 A g⁻¹ after 700 cycles and 584.8 mAh g⁻¹ at 5 A g⁻¹ after 800 cycles). Moreover, at a rate of 1 A g⁻¹, the average specific capacity is maintained at 661 mAh g⁻¹. Thus, the hierarchical hollow NCM-NC hybrids with excellent electrochemical performance are a promising anode material for LIBs.