超强频率梳激光场驱动下多光子共振谐波辐射的相位突变研究

本文从理论上研究了在双色频率梳激光场驱动下多光子谐波辐射光谱中的相位突变现象。我们利用Floquet理论非微扰地模拟了频率梳激光场与原子分子等量子系统的相互作用过程。谐波辐射信号是多光子偶极跃迁相干叠加的结果,通过调节频率梳激光场间的相对相位,可以相干地控制谐波辐射信号的强度。通过对谐波信号进行傅里叶变换,可以提取不同跃迁路径的相对相位信息。我们通过改变频率梳组激光场的强度和频率组分实现多光子跃迁频率,让其跨越共振跃迁频率时,谐波相位会发生突变。从而可以观测超强激光场驱动下量子系统共振跃迁频率的斯塔克能移。     

Micro-scale Fabry–Perot interferometer with high spectral resolution and tunable transmission frequency via chiral waveguide-emitter coupling

A micro-scale Fabry–Perot interferometer with high spectral resolution and tunable transmission frequency is proposed. In this scheme, two partially reflecting mirrors with a separation of several wavelengths is fabricated in a waveguide, and a two-level emitter is located between the mirrors and coupled to the waveguide with chiral interaction. We analytically show that the single emitter plays the role of a strongly dispersive medium and the full width at half maximum (FWHM) of the transmission fringes around the resonance frequency of the emitter can be narrowed by 5 orders of magnitude. The proposed micro-scale interferometer can have the same spectral resolution as meter-scale traditional interferometers. We also show that the central frequency of the narrowed transmission fringe can be tuned by adjusting the asymmetry of the emitter-waveguide coupling. Our scheme has potential applications in the fields of integrated optical circuit and quantum information processing.     

Preparation of 4-sulfonylcalix[6]arene modified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> as adsorbent for adsorption of U(VI) from aqueous solution

The 4-sulfonylcalix[6]arene modified Fe₃O₄ (MFS) was characterized by FT-IR, SEM, VSM, TGA, etc., which showed that its saturation magnetization was 64.99 emu g^?1 with the particle size 10–40 nm. The maximum adsorption efficiency by MFS for 2.5 mg L^?1 U(VI) solution amounted to 94.39%, which was higher than that by Fe₃O₄ (65.22%) under its optimum adsorption conditions. The adsorption of MFS and Fe₃O₄ were both followed the pseudo-second order model and the Langmuir isotherm model. The Gibbs free energy change and enthalpy change revealed that the adsorption of U(VI) by MFS was a spontaneous and endothermic process.     

A novel fringe adaptation method for digital projector

Aimed to obtain high-quality sinusoidal fringe projection, a new method to correct the output fringe of digital projector is presented. The method is based on the proposed fringe transform model, which describes the relationship of the input and output fringe pattern. Firstly, a series of fringe patterns are projected and from the fringe images, the transform function is calculated by the pattern shifting method. At last, by modifying the input fringe pattern, a standard sinusoidal output fringe can be achieved. Different from the previous methods, the waveform nonlinearity is estimated by varying the intensity of the projected fringe pixel by pixel; thus the waveform nonlinearity can be estimated precisely and the time cost is considerably reduced. Experimental results show that by modification of the input projection patterns the projector can project fringe with high-quality sinusoidal waveform leading to high performance of the projection system.     

Defluorination and Mineralization of Difluorophenols in Water by Anodic Contact Glow Discharge Electrolysis

Anodic contact glow discharge electrolysis (CGDE) is a DC-excited atmospheric pressure discharge, in which a steady non-thermal plasma is generated locally between the surface of an electrolytic solution and an anode in contact with it. The I–U characteristics of CGDE were investigated. The plasma temperatures were estimated to be in the range, 1373–2045 K. Hydroxyl radicals and hydrogen peroxide were the main oxidants generated by CGDE. The hydrogen peroxide concentration reached 31.2 mmol/L (mM) in a phosphate buffer solution without organic substrates. During CGDE, the DFPs and the corresponding total organic carbon (TOC) in water were consumed. Most of the fluorine atoms in the DFPs were converted to fluoride ions, and the fluoride concentration increased steadily. An analysis of the hydroxylation of DFPs suggested that the hydroxyl radicals generated by CGDE were the key species responsible for the degradation of DFPs, and the possible mechanistic routes of the mineralization of DFPs are proposed. The disappearance of DFPs and the TOC as well as the defluorination of the DFPs followed first-order kinetics. The rate of TOC disappearance was relatively constant: 1.00 ± 0.05 × 10^?2 min^?1. The order of disappearance of the DFPs was 2,6-DFP > 2,3-DFP > 2,5-DFP > 2,4-DFP > 3,4-DFP > 3,5-DFP. In contrast, the order of defluorination of the DFPs was 2,5-DFP > 2,3-DFP > 2,6-DFP > 2,4-DFP > 3,4-DFP > 3,5-DFP. Overall, the order of the reaction rates for each DFP was k_DFP > k_dF > k_TOC.     

Alpha-CuV2O6 nanowires: hydrothermal synthesis and primary lithium battery application

We report on the synthesis, characterization, and electrochemical lithium intercalation of alpha-CuV2O6 nanowires, mesowires, and microrods that were prepared through a facile hydrothermal route. The diameters of the as-synthesized alpha-CuV2O6 nanowires, mesowires, and microrods were about 100 nm, 400 nm, and 1 microm, respectively. It was found that by simply controlling the hydrothermal reaction parameters, such as the reagent concentration and the dwell time, the transformation of microrods to nanowires was readily achieved via a "ripening-splitting" mechanism. Electrochemical measurements revealed that the as-prepared alpha-CuV2O6 nanowires and mesowires displayed high discharge capacities (447-514 mAh/g at 20 mA/g and 37 degrees C) and excellent high-rate capability. In particular, the alpha-CuV2O6 nanowires showed capacities much higher than those of alpha-CuV2O6 mesowires, microrods, and bulk particles. The mechanisms for the electrochemical lithium intercalation into the alpha-CuV2O6 nanowires were also discussed. From the Arrhenius plot of lithium intercalation into alpha-CuV2O6 nanowires, the activation energies were calculated to be 39.3 kJ/mol at 2.8 V (low lithium uptake) and 35.7 kJ/mol at 2.3 V (high lithium uptake). This result indicates that the alpha-CuV2O6 nanowires are promising cathode candidates for primary lithium batteries used in long-term implantable cardioverter defibrillators (ICD).     

Systematic investigations on the biophysical complexation of hydroxyethyl starch 200/0.5 with human serum albumin

Journal of Inclusion Phenomena and Macrocyclic Chemistry - Spectroscopic techniques have been used to improve the understanding of the interactions between hydroxyethyl starch (HES) 200/0.5 and...     

Electrode/Electrolyte Synergy for Concerted Promotion of Electron and Proton Transfers toward Efficient Neutral Water Oxidation

Neutral water oxidation is a crucial half-reaction for various electrochemical applications requiring pH-benign conditions. However, its sluggish kinetics with limited proton and electron transfer rates greatly impacts the overall energy efficiency. In this work, we created an electrode/electrolyte synergy strategy for simultaneously enhancing the proton and electron transfers at the interface toward highly efficient neutral water oxidation. The charge transfer was accelerated between the iridium oxide and in situ formed nickel oxyhydroxide on the electrode end. The proton transfer was expedited by the compact borate environment that originated from hierarchical fluoride/borate anions on the electrolyte end. These concerted promotions facilitated the proton-coupled electron transfer (PCET) events. Due to the electrode/electrolyte synergy, Ir−O and Ir−OO⁻ intermediates could be directly detected by in situ Raman spectroscopy, and the rate-limiting step of Ir−O oxidation was determined. This synergy strategy can extend the scope of optimizing electrocatalytic activities toward more electrode/electrolyte combinations.     

Ultrasensitive DNAzyme based amperometric determination of uranyl ion using mesoporous silica nanoparticles loaded with Methylene Blue

Microchimica Acta - The authors describe an ultrasensitive amperometric enzymatic assay for uranyl ion. It&nbsp;is based on the use of mesoporous silica nanoparticles (mesoSiNPs) loaded with...     

钯催化选择性构筑(Z)-[3]戟烯反应研究

本工作发展了钯催化下芳甲醛对甲苯磺酰腙与膦酰基取代联烯的偶联反应, 顺利地以中等至良好的收率及较高的立体选择性制备了一系列(Z)-[3]戟烯衍生物. 不同于烷基取代的苯磺酰腙与烯烃的简单偶联, 该反应使用芳甲醛对甲苯磺酰腙作为底物, 经由1,3-钯迁移历程成功构筑了两个C=C双键. 在最优反应条件下, 该反应展示了较宽的底物适用范围和较高的立体选择性. 最终以31个反应实例获得一系列(Z)-[3]戟烯衍生物, 最高79%分离产率和>20:1 Z/E选择性, 为(Z)-[3]戟烯衍生物的合成应用提供了简便高效的方法.