Control of the block copolymer morphology in templated epoxy thermosets

It has been found that by the addition of low concentrations of an amphiphilic block copolymer to an epoxy resin, novel disordered morphologies can be formed and preserved through curing. This article will focus on characterizing the influence of the block copolymer and casting solvent on the templated morphology achieved in the thermoset sample. The ultimate goal of this work is to determine the parameters that would control the microphase morphology produced. Epoxy resins blended with a series of amphiphilic block copolymers based on hydrogenated polyisoprene (polyethylene-alt-propylene or PEP) and polyethylene oxide (PEO), specifically, were investigated. In this article, the cure-induced order–order phase transition from the spherical to wormlike micelle morphology will also be discussed. It is proposed that the formation of the wormlike micelle structure from the spherical micelle structure is similar to the phase transition behavior that occurs in dilute block copolymer solutions as a function of the influence of the solvent on micelle morphology. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3338–3348, 2007     

Study of the peak effect phenomenon in single crystals of 2H-NbSe2

The weakly pinned single crystals of the hexagonal 2H-NbSe₂ compound have emerged as prototypes for determining and characterizing the phase boundaries of the possible order-disorder transformations in the vortex matter. We present here a status report based on the ac and dc magnetization measurements of the peak effect phenomenon in three crystals of 2H-NbSe₂, in which the critical current densities vary over two orders of magnitude. We sketch the generic vortex phase diagram of a weakly pinned superconductor, which also utilizes theoretical proposals. We also establish the connection between the metastability effects and pinning.     

Numerical Modeling of Solitons in a Low Birefringent Optical Fiber

A numerical investigation, based on the split-step Fourier transform algorithm of all optical switching of solitons in a low birefringent optical fiber is presented. The numerical algorithm is described in detail. This revised version was published online in August 2006 with corrections to the Cover Date.     

Fast switching anisotropic networks obtained by in situ photopolymerization of liquid crystal molecules

Lightly cross-linked anisotropic networks with uniaxial and π/2 twisted orientations were produced by photopolymerization of monotropic mixtures containing liquid crystal mono and diacrylates. In this way the polymer backbone was immobilized and became decoupled from the motion of the mesogenic side groups. The networks showed very good reversibility and even after becoming isotropic, upon cooling, the initial orientation was recovered. In the same way, in the presence of electric fields the mesogenic groups could be reoriented in the direction of the electric field, reverting back to the initial orientation on removal of the field at a rate comparable with those observed in the monomeric state. Combining viscoelastic measurements with the dielectric behaviour of the monomeric liquid crystal and the anisotropic network, a comparison between the internal and bulk rotational viscosities was also made.     

Selected-area growth of carbon nanotubes by the combination of focused ion beam and chemical vapor deposition techniques.

In this article, we report a technique for growing carbon nanotubes in a more controllable fashion, which enables us to synthesize nanotubes directly in various forms of designed patterns. This nanofabrication process is based on a combination of focused ion beam (FIB) and chemical vapor deposition (CVD) techniques. In this process, arrays of conductive patterns were first deposited on silicon substrates by directing a gaseous compound (C(9)H(16)Pt) via the capillary needle-sized nozzles within a FIB system. The substrates were then coated with catalyst and further modified by the FIB to localize the position of the catalyst. Finally, the growth of carbon nanotubes on the designed substrates was carried out by CVD of hydrocarbon gases. This fabrication technique has the advantage of positioning carbon nanotubes in selected locations. This may open up opportunities for the direct synthesis of carbon nanotubes onto almost any substrate material, thus allowing fabrication of carbon nanotube-based devices.     

Second Dissociation Constant of Bis-[(2-hydroxyethyl)amino]acetic Acid (BICINE) and pH of Its Buffer Solutions from 5 to 55 °C

The values of the second dissociation constant, K ₂, and related thermodynamic quantities of the ampholyte bis[(2-hydroxyethyl)amino]acetic acid (BICINE) have been determined at temperatures from 5 to 55 ^∘C. The pH values of six equimolal buffer solutions, and four buffer solutions having ionic strengths (I = 0.16 mol⋅kg⁻¹) similar to those in blood plasma, have been evaluated at 12 temperatures from 5 to 55 ^∘C using the Bates–Guggenheim convention. The liquid junction potentials (E _j ) between the buffer solutions of BICINE and saturated KCl solution of the calomel electrode at 25 and 37 ^∘C have been estimated by measurement with a flowing junction cell. These values of E _j have been used to ascertain the operational pH values at 25 and 37 ^∘C. The pK ₂ values at 25 and 37 ^∘C are 8.333 and 8.156, respectively. The thermodynamic quantities associated with the second acid dissociation have been calculated from the values of pK ₂ as a function of temperature. The zwitterionic buffer BICINE was shown to be useful as a pH standard in the region close to that of blood serum.     

Ammonium hexafluorosilicate salts

The preparation and characterization of the ammonium hexafluorosilicate salts, 2[R]⁺ [SiF₆]²⁻ (where R=piperidinium (2), methylammonium (3), quinolinium (4), acridinium (5), 2,2,6,6-tetramethylpiperidinium (6), and propylammonium (7)) is described.The salts were prepared from the reaction of the corresponding alkylammonium fluoride with silica gel. The compounds were characterized by NMR, IR, mass spectrometry and in the case of 1 (piperidinium fluoride), 2-4 by X-ray crystallography. Compounds 1-3 crystallize in the orthorhombic crystal system (space groups Iba2, Fdd2, and Pnnm, respectively), with Z=8, 14, and 4, respectively. Compound 4 crystallizes in the triclinic space group P-1, with Z=2. Compounds 1-4 exhibit hydrogen bonding.