Application of N,N‐bis(diphenylphosphino)aniline palladium(II) complexes as pre‐catalysts in Heck coupling reactions

Palladium(II) complexes with N,N‐bis(diphenylphosphino)aniline ligands catalyse the Heck reaction between styrene and aryl bromides, affording stilbenes in good yield. The structures of two of the complexes used as pre‐catalysts have been determined by single‐crystal X‐ray diffraction. Copyright © 2007 John Wiley & Sons, Ltd.     

Mixing mechanisms of vortex ring formed by gravity slumping motion

 This paper is concerned with an experimental investigation of the mixing inside the vortex ring formed by the gravity slumping motion of a dense cloud in a less dense atmosphere. The dynamics of the spreading and instantaneous structures of the turbulent flow were examined by visualization, single and multi-point measurements of velocity and concentration for two heavy gases, carbondioxide (CO₂) and dichlorodifluoromethane (CCl₂F₂), in a configuration in that heavy gas, initially trapped in a reservoir, was released with the rise of a shutter into calm air of a sector-shaped dispersion channel. Visualization of the cloud as a whole showed a spreading motion in which an advancing frontal structure was followed by a stratified flow with a layer of dense fluid of higher velocities near the wall and, on top of it, a layer of dilute fluid whose concentration is controlled by the mixing mechanisms within the head. During the course of spreading, there was always a phase in which the head attained to a constant speed of advance, which occurred as 0.13 m/s for CO₂ and 0.48 m/s for CCl₂F₂. It was interesting to observe for CO₂ that the phase of constant speed took place in between two acceleration phases; the former was due to the initial slumping of the cloud at the exit of the reservoir, and the latter was attributed to the collapse of the head on the transition to the passive dispersion phase. Instantaneous two-dimensional velocity field, measured with particle image velocimeter (PIV), showed that the cloud overran the ambient air which caused the approaching dense fluid deflected away from the wall with significant vertical velocities and downstream-moving separation, and the air trapped under the head resulted in the density inversion which introduced further intricacy to the turbulent structure of the head. Instabilities at the upper free shear layer due to density and velocity discontinuity rolled into periodic array of vortices which engulfed a considerable amount of air as they were convected backwards over the head, but the incorporation of heavy and light fluids was completed with the appearance of microscales after the collapse on the stratified layer. Analyses of the cloud head at different downstream locations also revealed that its size remained unchanged when the speed of advance was constant, allowing the rate of change of the cloud volume being modeled with the rate of spreading. Contours of concentration obtained from digitized PIV pictures confirmed the kinematic features of the mixing revealed by the velocity field and that the concentration values within the large structures were higher than those at the upper part of the stratified layer. Motivated by the experimental observations, a semi-empirical analysis was presented to describe the results and based on local values of the Richardson and Reynolds numbers. Received: 4 October 1995 / Accepted: 4 July 1996     

Efficient synthesis of ferrocenylenones by Friedel-Crafts acylation with EtAlCl2-Me3Al

Efficient synthesis of ferrocenylenones using a Friedel-Crafts acylation reaction is described. Acryloyl, methacryloyl, crotonoyl, cinnamoyl, and β-methylcrotonoyl chlorides react with ferrocene in the presence of a Lewis acid (EtAlCl₂ or EtAlCl₂-Me₃Al) to give the corresponding ferrocenylenones (acryloyl, methacryloyl, crotonoyl, cinnamoyl, and methylcrotonoylferrocenes) in good isolated yields. Besides ferrocenylenones, chloroactylferrocene is also synthesised by this method.     

Use of tetrahydropyrimidinium salts for highly efficient palladium-catalyzed cross-coupling reactions of aryl bromides and chlorides

New, sterically demanding 1,3-dialkyl-3,4,5,6-tetrahydropyrimidinium salts (2) as NHC precursors have been synthesized and characterized. These salts, in combination with palladium acetate, provided active catalysts for the cross-coupling of aryl chlorides and bromides under mild conditions. The catalytic system was applied to the Heck, Suzuki and benzaldehyde (Kumada) coupling reactions. Catalyst activity was found to be influenced by the presence of a methoxy group on the ring of the p-position of benzyl substituent of the ligand precursor.     

Determination of the stability constants of uranyl complex with 8-hydroxyquinolinium sulfate

8-Hydroxyquinoline (8-HOQ) is known as an important chelating agent for several metal ions. This compound is practically insoluble in water. For this reason, in this study its water soluble sulfate salt has been used for complexing uranyl ions and the stability constants of the complex have been determined. The Irving-Rosotti method computing the Calvin-Bjerrum pH-titration data, was applied. Finally, the stability constants of the complex formed between (8-HOQN-H)₂SO₄ and uranyl ions were found to be lgK₁=8.25 and lgK₂=4.15, the overall stability constant being {ie55-1}.     

Study on labeling conditions of125I-synkavit by the iodogen method

Labeling conditions of synkavit (2-methyl-1,4-naphthoquinol disodium phosphate) with iodine-125 have been studied. In this study, labeling temperature, reaction time, successive using of iodogen coated tubes, iodogen amount and synkavit concentrations have been determined to get optimum conditions for maximum labeling. Final results showed that when the labeling temperature, reaction time, synkavit concentration, and iodogen amount were, at room temperature, 15 min (in the case of successive using of three iodogen coated tubes), 2 mg ml^–1 and 5 mg, respectively; labeling yield was 90% and specific activities of the order of 555 GBq mmol^–1 (15 Ci mmol^–1) have been obtained.     

Preparation and characterization of Co(II), Ni(II) and Cu(II) complexes of a ligand containing 1,3,4-thiadiazole groups

(1R,2R)-1,2-bis-(5-amino-1,3,4-thiadiazole-2-yl)ethane-1,2-diol (L) has been prepared by the reaction of thiosemicarbazide with (2R,3R)-(+)-tartaric acid (I) and phosphorous oxychloride, and its complexes with Co(II), Ni(II) and Cu(II) have been obtained. The structures of the ligand and its complexes have been established by i. r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis–nir spectroscopy, elemental analyses, T.g.-D.t.a. and magnetic susceptibility measurements.     

A μ‐chloro‐bridged dinuclear ruthenium complex with 9H‐carbazole: the formation of one‐dimensional linear chains of star‐shaped edge‐fused rings

The title complex, di‐μ‐chloro‐bis­[chloro­(η⁶‐p‐cymene)ruthenium(II)]–9H‐carbazole (1/2), [Ru₂Cl₄(C₁₀H₁₄)₂]·2C₁₂H₉N, is composed of one [RuCl₂(η⁶‐p‐cymene)]₂ and two 9H‐carbazole mol­ecules. There are one‐half of a dinuclear complex and one 9H‐carbazole mol­ecule per asymmetric unit. In the dinuclear complex, each of the two crystallographically equivalent Ru atoms is in a pseudo‐tetra­hedral environment, coordinated by a terminal Cl atom, two bridging Cl atoms and the aromatic hydro­carbon, which is linked in a η⁶ manner; the Ru⋯Ru separation is 3.688 (3) Å. The title complex has a crystallographic centre of symmetry located at the mid‐point of the Ru⋯Ru line. Inter­molecular N—H⋯Cl and π–π stacking inter­actions are observed. These inter­actions form a four‐pointed star‐shaped ring and one‐dimensional linear chains of edge‐fused rings running parallel to the [100] direction, which stabilize the crystal packing.     

Hydrogen bonding in meso‐4,5‐diphenyl‐3,6‐diaza­octane‐1,8‐diol: the formation of one‐dimensional linear chains of edge‐fused rings

The molecule of the title compound, C₁₈H₂₄N₂O₂, resides on a crystallographic inversion centre. The mol­ecule adopts a transoid conformation with respect to the central C—C single bond and is in the meso form. A polarimetric study of the compound did not show any optical activity, indicating that the compound is a racemic mixture entirely consistent with the centrosymmetric space group. In the mol­ecule, there is one intra­molecular N—H⋯O inter­action, resulting in the formation of a five‐membered ring. In the crystal structure, inter­molecular O—H⋯N and C—H⋯O inter­actions are also observed. These inter­actions form an R₂²(9) ring and one‐dimensional linear chains of edge‐fused rings running parallel to the [010] direction, which stabilize the crystal packing.     

Photochemical reactions of metal carbonyls [M(CO)6 (M = Cr,Mo and W), Re(CO)5Br,Mn(CO)3Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh)

Five new complexes, [M(CO)₅(apmsh)] [M = Cr; (1), Mo; (2), W; (3)], [Re(CO)₄Br(apmsh)] (4) and [Mn(CO)₃(apmsh)] (5) have been synthesized by the photochemical reaction of metal carbonyls [M(CO)₆] (M = Cr, Mo and W), [Re(CO)₅Br], and [Mn(CO)₃Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh). The complexes have been characterized by elemental analysis, mass spectrometry, f.t.-i.r. and ¹H spectroscopy. Spectroscopic studies show that apmsh behaves as a monodentate ligand coordinating via the imine N donor atom in [M(CO)₅(apmsh)] (1–4) and as a tridentate ligand in (5).