Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Linear optical switching in a FLC/waveguide composite device

A fast electrooptic modulation in a polymer waveguide using a ferroelectric liquid crystal has been proposed. In this device, the surface stabilized ferroelectric liquid crystal and the soft mode ferroelectric liquid crystal are used as an active material on the passive polymer waveguide, and electrooptic switching is realized by controlling the total reflection at the polymer waveguide-liquid crystal interface. The response time is of the order of several microseconds. The analogue electrooptic modulation in the waveguide is realized using the field induced linear molecular tilt of the electroclinic effect in the soft mode ferroelectric liquid crystal.     

A fast atom bombardment mass spectrometric analysis of crown ether complexes [1]

Analyses of crown ether complexes of alkali metal ions and characterization of the complexes formed inm-nitrobenzyl alcohol have been carried out by fast atom bombardment (FAB) mass spectrometry. By using m-nitrobenzyl alcohol as a matrix for measurements, the stoichiometry of the complexes was assessed on the basis of the observed FAB peaks. In addition, the formation of crown ether-alkali metal complexes at a 2 : 1 molar ratio was enhanced by increasing the ionic radius of the metal ion in agreement with previous observations. On these grounds, FAB mass spectrometry may provide a rapid means for investigation of the complexation behavior of crown ethers and the stoichiometry of the complexes.     

Simple and rapid determination of hydrogen peroxide using phosphine-based fluorescent reagents with sodium tungstate dihydrate.

A simple batch method for the fluorometric determination of hydrogen peroxide using phosphine-based fluorescent reagents has been developed. A rapid, mild and selective derivatization reaction was achieved by adding sodium tungstate dihydrate to the reaction mixture of hydrogen peroxide and a phosphine-based fluorescent reagent. When 4-diphenylphosphino-7-methylthio-2,1,3-benzoxadiazole was used as a reagent, the derivatization reaction was completed after 2 min at room temperature. The calibration curve was linear between 12.5 and 500 ng hydrogen peroxide in a 10 microL sample solution. This method is accurate and has potential for on-line applications.     

Studies on the syntheses of heterocyclic compounds. CLXXIV. An approach to the synthesis of oxyacanthine and berbamine

Schotten-Baumann reaction of the amine (X) with 4-benzyloxy-3,4′-oxydiphenylacetyl chloride (XI) gave two amides, (XIIa) and (XIIb), which were cyclized to give the corresponding 3,4-dihydroisoquinolines, respectively. Methylation of the above 3,4-dihydro-isoquinolines, followed by hydrolysis, afforded the compounds having the same composition as berbamine (Ia) and oxyacanthine (Ib), whose structures are under examination.     

Enzyme-less amperometric biosensor for l-ascorbate using poly-l-histidine-copper complex as an alternative biocatalyst

A poly-l-histidine(PLH)-copper(II) complex can be used as an alternative biocatalyst in an O(2) detection-type amperometric enzyme-less l-ascorbate (AsA) sensor. The PLH-Cu(II) membrane was simply prepared by entrapping the PLH in polyacrylamide gel and subsequent treatment of the gel with CuCl(2) solution. This enzyme-less biosensor can be used over a relatively wide pH region from 4 to 11 and enables precise determination of AsA (RSD less than 3%, n=10) at pH 7.0. The fundamental performance characteristics (sensitivity, response time, and linear range) of this PLH-Cu(II)-based sensor is comparable to those of a native ascorbate oxidase-based sensor. Unfortunately, the selectivity is inherently rather low and, as a result, the response was degraded in the presence of higher concentrations (more than mM order) of quinones. However, reducing sugars caused no interference and the sensor could be used to detect AsA in some fruits and drinks. This enzyme-less sensor has excellent stability for at least 3 months of repeated analysis (more than 300 samples) without loss of ordinal activity.     

Measurement of acid-catalyzed isomerization of unsaturated aldehyde-2,4-dinitrophenylhydrazone derivatives by high-performance liquid chromatography analysis

Aldehyde-2,4-dinitrophenylhydrazones exist as (E)- and (Z)-geometrical isomers, and adventitious isomerization during sample preparation can cause analytical errors. Purified alkenal-2,4-dinitrophenylhydrazone derivatives comprise only the (E)-isomer. However, partial isomerization to the (Z)-isomer occurs upon addition of acid to attain an equilibrium isomer ratio. The UV-visible spectral properties of the isomers differ; the (Z)-isomer exhibiting a 6-10 nm lower absorption maximum compared to the (E)-isomer. Alkenal-2,4-dinitrophenylhydrazones having a CC double bond at the 2- or 3-position of the alkenal exhibited similar absorption maxima with an equilibrium isomer ratio (0.035) that was much lower than those of other alkenals. The CC double bond at the 3-position migrates to a position of conjugation with the CN double bond during hydrazone synthesis to form a stabilized molecular structure. Alkenal-2,4-dinitrophenylhydrazones having a double bond at the 4-position or greater exhibited a similar absorption maxima equilibrium isomer ratio (0.14) to alkanal-2,4-dinitrophenylhydrazones. The quantitative analysis of carbonyl compounds in air or water using DNPH is usually conducted in the presence of an acid catalyst. Consequently, the solution of the direct extract prepared for HPLC or GC analysis contains both (E)- and (Z)-isomers.     

Adsorption characteristics of radionuclides on nickel hexacyanoferrate(ii)

The composition of nickel hexacyanoferrate(II) complexes depends on the ratios of sodium hexacyanoferrate(II) and nickel nitrate solutions mixed. The adsorption behavior of nickel hexacyanoferrate(II) is described; acid treatment of Ni₂Fe(CN)₆ accelerates the adsorption rate of cesium, but does not increase the adsorption capacity. The Ni—Cs exchange ratios of Ni₂Fe(CN)₆ are discussed. In concentrated salt solutions, the distribution coefficients of ⁵⁹Fe, ⁶⁰Co, ⁶⁵Zn. ¹³⁷Cs, ⁹⁵Zr and ¹⁴⁴Ce are determined together with those of ⁸⁵Sr and ¹⁰⁶Ru. A simple determination of ¹³⁷Cs in sea water containing ⁵⁹Fe, ⁶⁰Co, ⁶⁵Zn, ⁹⁵Zr, ¹⁴⁴Ce, ⁸⁵Sr and ¹⁰⁶Ru is described.     

Synthesis of new azonia-helicenes with a quaternary nitrogen at the inner helix skeleton

The 16c-azonia[6]helicene salts, in which a carbon atom at the inner helix skeleton of [6]helicene is replaced by a quaternary nitrogen atom, have been synthesized by photo-induced intramolecular quater-nization of 2-[2-(1-chloronaphthyl)vinyl]benzo[h]quinolines in acetonitrile.