Quinazoline Derivatives Designed as Efflux Pump Inhibitors: Molecular Modeling and Spectroscopic Studies

Multidrug resistance of bacteria is a worrying concern in the therapeutic field and an alternative method to combat it is designing new efflux pump inhibitors (EPIs). This article presents a molecular study of two quinazoline derivatives, labelled BG1189 and BG1190, proposed as EPIs. In silico approach investigates the pharmacodynamic and pharmacokinetic profile of BG1189 and BG1190 quinazolines. Molecular docking and predicted ADMET features suggest that BG1189 and BG1190 may represent attractive candidates as antimicrobial drugs. UV-Vis absorption spectroscopy was employed to study the time stability of quinazoline solutions in water or in dimethyl sulfoxide (DMSO), in constant environmental conditions, and to determine the influence of usual storage temperature, normal room lighting and laser radiation (photostability) on samples stability. The effects of irradiation on BG1189 and BG1190 molecules were also assessed through Fourier-transform infrared (FTIR) spectroscopy. FTIR spectra showed that laser radiation breaks some chemical bonds affecting the substituents and the quinazoline radical of the compounds.     

Using wavelets to analyze AFM images of thin films: surface micelles and supported lipid bilayers

This paper presents micro- and nanoanalysis of thin films based on images obtained by atomic force microscopy (AFM). The analysis exploits the discrete wavelet transform and the resulting wavelet spectrum to study surface features. It is demonstrated that the wavelet technique can characterize micro- and nanosurface features and distinguish between similar surface structures. The use of a feature extraction method is shown. The method involves the separation of certain frequency content from the original AFM images and analyzing the data independently to gain quantitative information about the images. By using the feature extraction method, soft surfaces in water are analyzed and nanofeatures are measured. The packing of surface micelles of sodium dodecyl sulfate on a self-assembled monolayer is analyzed. The characteristics of pore formation, due to penetration of the antibacterial peptide protegrin, into a solid-supported lipid bilayer are quantified. The sizes of the pores are obtained, and it is observed that the line tension of the pores reduces the fluctuations of the lipid bilayer.     

On the natural Fiber (Maize) Composite material

This work is focused on the compressive behavior in the elastic region of a composite material made out of stalk-based maize fiber and unsaturated polyester resin polymer as matrix with methyl ethyl ketone peroxide as a catalyst and Cobalt Octoate as a promoter [1]. Deformation and fracture behavior are investigated by using Extended Finite Element Method (XFEM). XFEM enables the accurate approximation of solutions with jumps, discontinuities or general high gradients across interfaces between the fibers and the matrix [2], [3]. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Poly(β-cyclodextrin)-mediated Polylactide-cholesterol Stereocomplex Micelles for Controlled Drug Delivery

A series of host-guest interaction-adjusted polylactide stereocomplex micelles was prepared via the self-assembly of 4-armed poly(ethylene glycol)-block-poly(L-lactide/D-lactide)-cholesterol(4-armed PEG-b-PLLA/PDLA-CHOL) and poly(β-cyclodextrin)(PCD) with the molar ratios of CHOL/β-CD at 1:0.5, 1:1, and 1:2 in an aqueous environment. The hydrodynamic diameters of the micelles ranged from 84.1 nm to 107 nm depending on the molar ratio of CHOL/β-CD. It was shown that the micelle with the largest proportion of PCD possessed excellent abilities in drug release, cell internalization as well as proliferation inhibitory effect toward human A549 lung cancer cells. The results demonstrated that the stereocomplex and host-guest interactions-mediated PLA micelles exhibited great potential in sustained drug delivery.     

p-type ZnO thin films grown by RF plasma beam assisted Pulsed Laser Deposition

The high exciton binding energy and band gap energy of ZnO thin films open the prospect of fabricating semiconductor lasers in the ultraviolet spectral range. A prerequisite for laser diode fabrication is highly p-doped ZnO which was not reproducibly obtained up to now. Without intentional doping ZnO exhibits n-type conduction. ZnO thin films have been obtained by radio-frequency assisted pulsed laser deposition. A metallic Zn target was used for ablation in an oxygen and nitrogen RF discharge. The electrical and morphological properties of the films grown on Si were studied by Atomic Force Microscopy (AFM), X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), optical absorption and Hall Effect measurements for different ratios between the nitrogen and oxygen content. The AFM images of the as-grown ZnO films reveal high quality surfaces with low values for the surface roughness and a sharp distribution of grains sizes as an effect of the RF discharge. The XRD patterns for all samples exhibit only (002) and (004) peaks indicating that the c-axis is always oriented normal to the substrate surface. The films present p-type conductivity with different carrier concentration and mobility depending on the nitrogen/oxygen ratio.     

Poly(<Emphasis Type="Italic">β</Emphasis>-cyclodextrin)-mediated polylactide-cholesterol stereocomplex micelles for controlled drug delivery

A series of host-guest interaction-adjusted polylactide stereocomplex micelles was prepared via the self-assembly of 4-armed poly(ethylene glycol)-block-poly(L-lactide/D-lactide)-cholesterol (4-armed PEG-b-PLLA/PDLA-CHOL) and poly(β-cyclodextrin) (PCD) with the molar ratios of CHOL/β-CD at 1:0.5, 1:1, and 1:2 in an aqueous environment. The hydrodynamic diameters of the micelles ranged from 84.1 nm to 107 nm depending on the molar ratio of CHOL/β-CD. It was shown that the micelle with the largest proportion of PCD possessed excellent abilities in drug release, cell internalization as well as proliferation inhibitory effect toward human A549 lung cancer cells. The results demonstrated that the stereocomplex and host-guest interactions-mediated PLA micelles exhibited great potential in sustained drug delivery.     

Dimensionality switching through a thermally induced reversible single-crystal-to-single-crystal phase transition in a cyanide complex

The heterometallic hexanuclear cyanide-bridged complex {[Mn(bpym)(H(2)O)](2)[Fe(HB(pz)(3))(CN)(3)](4)} (1), its C(15)N and D(2)O enriched forms {[Mn(bpym)(H(2)O)](2)[Fe(HB(pz)(3))(C(15)N)(3)](4)} (2) and {[Mn(bpym)(D(2)O)](2)[Fe(HB(pz)(3))(CN)(3)](4)} (3), and the hexanuclear derivative complex {[Mn(bpym)(H(2)O)](2)[Fe(B(pz)(4))(CN)(3)](4)}·4H(2)O (4) [bpym = 2,2'-bipyrimidine, HB(pz)(3)(-) = hydrotris(1-pyrazolyl)borate, B(pz)(4)(-) = tetra(1-pyrazolyl)borate] have been synthesized. Their structures have been determined through single-crystal X-ray crystallography at different temperatures. Whereas 3 and 4 maintain a discrete hexanuclear motif during the entire temperature range investigated (down to 95 K), 1 and 2 exhibit a thermally induced reversible single-crystal to single-crystal phase transition driven by a remarkable concerted rearrangement of hydrogen and cyanide coordination bonds. While hexanuclear complexes are observed in the high temperature phases (noted 1a and 2a) above 200 K, the low temperature phases are composed of one-dimensional coordination polymers noted 1b and 2b. The magnetic properties of the four compounds have been investigated in the 2-300 K range, and they reveal the occurrence of an overall antiferromagnetic behavior. The thermal dependence of the optical reflectivity and the FT-IR absorbance have been studied for 1 in the range 10-300 K and 130-300 K, respectively. A comparative analysis of the structural and electronic properties for 1-4 clearly underlines the major role of the intermolecular interactions in the topological and dimensional rearrangement observed during the structural phase transition. This result opens new perspectives in the design of cyanide-based switchable magnetic materials using coordination bonds rearrangements.     

On the composites consisting of randomly distributed fibers

The results highlight and interpret the testing and properties of natural fibre composites including, non-destructive and high strain rate testing. The potential of this material for noise enclosures is investigated by using a coupled method cnoidal – Extended Finite Element Method (XFEM). XFEM enables the accurate approximation of solutions with jumps, discontinuities or general high gradients across interfaces. The dissipation of the sound power into a plate/cavity system shows the efficiency of this composite to achieve noise reduction better to that obtained at low and higher frequencies with traditional foams. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Lead-free ferroelectric thin films obtained by pulsed laser deposition

Na_0.5Bi_0.5TiO₃-BaTiO₃ (NBT-BT) thin films grown by pulsed laser deposition have been investigated by X-ray diffraction, scanning electron microscopy, and dielectric spectroscopy in order to clarify the role of substrate temperature on crystalline structure, grain morphology, and dielectric properties. We have shown that the structural and dielectric properties of NBT-BT thin films with composition at morphotropic phase boundary (6% BT) critically depend on the substrate temperature: small variations of this parameter induce structural changes, shifting the morphotropic phase boundary toward tetragonal or rhombohedral side. Higher deposition temperature (1000 K) favor the formation of rhombohedral phase, films deposited at 923 K and 973 K have tetragonal symmetry at room temperature. Grains morphology depends also on the deposition temperature. Atomic force micrographs show grains with square or rectangular shape in a compact structure for films grown at lower temperatures, while grains with triangular shape in a porous structure are observed for films grown at 1000 K. Dielectric spectroscopy measurements evidenced the phase transition between ferroelectric and antiferroelectric phase at 370 K. Films grown at 1000 K shown low electrical resistivity due to their porous structure. High dielectric constant values (about 800 at room temperature and 2700 at 570 K) have been obtained for films grown at temperatures up to 973 K.