Elemental distribution by synchrotron X-ray microfluorescence of prostate 3D cell culture

Prostate cancer is a highly prevalent disease and ranks second among malignant neoplasms that affect men around the world, behind lung cancer alone. Trace elements are very important and are involved in many cellular processes. The X-ray microfluorescence technique is an advanced tool of high spatial resolution, sensitivity, multielemental analysis, and nondestructiveness for trace element study. This study aimed to investigate the elemental distribution in spheroids obtained through the following human prostate cell lines using synchrotron X-ray microfluorescence: tumor cell line androgen independent (DU145), tumor cell line androgen dependent (LNCaP), and normal cell line (RWPE-1). The measurements were performed with a standard geometry of 45° of incidence, excited by a white beam using a pixel of 25 μm and an acquisition time of 300 ms/pixel at the X-ray fluorescence beamline at the Synchrotron Light National Laboratory (Campinas, Brazil). The synchrotron X-ray microfluorescence results showed differences between groups in all elements analyzed and suggested that further studies should be performed to understand the relationship of these trace elements with the progression and development of the disease.     

Heteroclinic orbits between rotating waves of semilinear parabolic equations on the circle

We investigate heteroclinic orbits between equilibria and rotating waves for scalar semilinear parabolic reaction-advection-diffusion equations with periodic boundary conditions. Using zero number properties of the solutions and the phase shift equivariance of the equation, we establish a necessary and sufficient condition for the existence of a heteroclinic connection between any pair of hyperbolic equilibria or rotating waves.     

Analysis of Antennas with PBG Substrate

The use of photonic materials has been used in the theory of optical waves. The PBG (Photonic Band Gap) theory and material, was developed recently for optical frequencies and can be easily applied to millimeter waves, microwaves and planar antenna frequencies. The presence of photonic materials as substrate in antennas has some good characteristics such as, supression of light spontaneous emission and suppression of surface waves, allowing the application in planar antenna array. In this work an elaborate analysis using the full wave Transverse Transmission Line - TTL method, that provides efficient and concise results is applied to the planar antennas array with PBG substrate.     

Development and critical comparison of greener flow procedures for nitrite determination in natural waters

Two greener procedures for flow-injection spectrophotometric determination of nitrite in natural waters were developed and critically compared. Replacement of toxic reagents, waste minimization and treatment were exploited to attend the standards of clean chemistry. The flow system was designed with solenoid micro-pumps in order to minimize reagent consumption and waste generation. The first procedure is based on the Griess diazo-coupling reaction with sulfanilamide and N-(1-naphthyl)ethylenediamine (NED) yielding an azo dye, followed by photodegradation of the low amount of waste generated based on the photo-Fenton reaction. The second procedure is based on the formation of iodine from nitrite and iodide in acid medium in order to avoid the use of toxic reagents. For Griess method, linear response was achieved up to 1.0 mg L^− 1, described by the equation A = − 0.007 + 0.460C (mg L^− 1), r = 0.999. The detection limit was estimated as 8 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.8% (n = 20). The sampling rate was estimated as 108 determinations per hour. The consumption of the most toxic reagent (NED) is reduced 55-fold and 20-fold in comparison to batch method and flow injection with continuous reagent addition, respectively. A colorless residue was obtained by in-line photodegradation with reduction of 87% of the total organic carbon content. The results obtained for natural water samples were in agreement with those achieved by the reference method at the 95% confidence level. For the nitrite–iodide method, linear response was observed up to 2.0 mg L^− 1, described by the equation A = − 0.024 + 0.148C (mg L^− 1), r = 0.999. The detection limit was estimated as 25 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.6% (n = 20). The sampling rate was estimated as 44 determinations per hour. Despite avoiding the use of toxic reagents, the nitrite–iodide method presented worst performance in terms of selectivity and sensitivity.     

A novel microporous copper silicate: Na2Cu2Si4O11.2H2O

The synthesis and structural characterisation of a thermally stable novel three-dimensional microporous copper silicate open-framework are described; the material is capable of undergoing reversible zeolitic water removal without destruction of the framework.     

Methodology for rapid tritium determination in urine

Summary The present work proposes a methodology for a rapid determina-tion of the tritium content in urine. The urine is treated with active carbon and tritium is determined by liquid scintillation counting. Different kinds of active carbon were experimented for the metabolites removal from urine samples. The counting efficiency was calculated by a quench curve using yellow food dye as a quenching agent. It was obtained a procedure which maintained a good reproducibility, low uncertainty and detection limit of 7 Bq/l (10 ml of urine, 120 minutes of counting time and efficiency of 23.9%).     

Direct determination of gallium on polyurethane foam by X-ray fluorescence

Gallium chloride is easily extracted from 6M HCl by comminuted polyether-type polyurethane foam. After the extraction step, the gallium absorbed by the PU foam can be quantitatively determined by X-ray fluorescence. A procedure for the direct determination of gallium absorbed by PU foam by XRFS is thus described. Gallium is determined at levels as low as 60 ng/ml (C(L)), with a calibration sensitivity of 424 cps ml/mug, within a linear range 0.1-2.30 mug/ml. The procedure investigated was successfully applied to determination of gallium in aluminum alloys, bauxite and industrial residue samples.     

X-ray diffraction and solid-state NMR studies of a germanium binuclear complex

A compound formulated as (C4H12N2)[Ge2(pmida)2(OH)2] x 4 H2O (where pmida(4-) = N-(phosphonomethyl)iminodiacetate and C4H12N2(2+) = piperazinedium cation), containing the anionic [Ge2(pmida)2(OH)2]2- complex, has been synthesised by the hydrothermal approach and its structure determined by single-crystal X-ray diffraction analysis. Several high-resolution solid-state magic-angle spinning (MAS) NMR techniques, in particular two-dimensional 1H-X(13C,31P) heteronuclear correlation (HETCOR) and 1H-1H homonuclear correlation (HOMCOR) experiments incorporating a frequency-switched Lee-Goldburg (FS-LG) decoupling scheme, have been employed for the first time in such a material. Using these tools in tandem affords an excellent general approach to study the structure of other inorganic-organic hybrids. We assigned the NMR resonances with the help of C...H and P...H internuclear distances obtained through systematic statistical analyses of the crystallographic data. The compound was further characterised by powder X-ray diffraction techniques, IR and Raman spectroscopy, and by elemental and thermal analyses (thermogravimetric analysis and differential scanning calorimetry).