Palladium‐Catalyzed Direct C2‐Arylation of an N‐Heterocyclic Carbene: An Atom‐Economic Route to Mesoionic Carbene Ligands

Blocking the C2 position of an imidazole‐derived classical N‐heterocyclic carbene (NHC) with an aryl group is an essential strategy to establish a route to mesoionic carbenes (MICs), which coordinate to the metal via the C4 (or C5) carbon atom. An efficient catalytic route to MIC precursors by direct arylation of an NHC is reported. Treatment of 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr) with an aryl iodide (RC₆H₄I) in the presence of 0.5 mol % of [Pd₂(dba)₃] (dba=dibenzylideneacetone) precatalyst affords the C2‐arylated imidazolium salts {IPr(C₆H₄R)}I (R=H, 4‐Me, 2‐Me, 4‐OMe, 4‐COOMe) in excellent (up to 92 %) yields. Treatment of {IPr(C₆H₅)}I with CuI and KN(SiMe₃)₂ exclusively affords the MIC–copper complex [(IPrPh)CuI].     

Total Synthesis,Stereochemical Assignment,and Field‐Testing of the Sex Pheromone of the Strepsipteran Xenos peckii

The sex pheromone of the endoparasitoid insect Xenos peckii (Strepsiptera: Xenidae) was recently identified as (7E,11E)‐3,5,9,11‐tetramethyl‐7,11‐tridecadienal. Herein we report the asymmetric synthesis of three candidate stereostructures for this pheromone using a synthetic strategy that relies on an sp³–sp² Suzuki–Miyaura coupling to construct the correctly configured C7‐alkene function. Comparison of ¹H NMR spectra derived from the candidate stereostructures to that of the natural sex pheromone indicated a relative configuration of (3R*,5S*,9R*). Chiral gas chromatographic (GC) analyses of these compounds supported an assignment of (3R,5S,9R) for the natural product. Furthermore, in a 16‐replicate field experiment, traps baited with the synthetic (3R,5S,9R)‐enantiomer alone or in combination with the (3S,5R,9S)‐enantiomer captured 23 and 18 X. peckii males, respectively (mean±SE: 1.4±0.33 and 1.1±0.39), whereas traps baited with the synthetic (3S,5R,9S)‐enantiomer or a solvent control yielded no captures of males. These strong field trapping data, in combination with spectroscopic and chiral GC data, unambiguously demonstrate that (3R,5S,9R,7E,11E)‐3,5,9,11‐tetramethyl‐7,11‐tridecadienal is the X. peckii sex pheromone.     

Non‐equilibrium polaritonics ‐ non‐linear effects and optical switching

This erratum refers to the article above, first published online on 31 December 2012 and later in print in Annalen der Physik, 525(1–2), 66–73 (2013).     

Fundamental Characterization,Photophysics and Photocatalysis of a Base Metal Iron(II)-Cobalt(III) Dyad

A new base metal iron-cobalt dyad has been obtained by connection between a heteroleptic tetra-NHC iron(II) photosensitizer combining a 2,6-bis[3-(2,6-diisopropylphenyl)imidazol-2-ylidene]pyridine with 2,6-bis(3-methyl-imidazol-2-ylidene)-4,4′-bipyridine ligand, and a cobaloxime catalyst. This novel iron(II)-cobalt(III) assembly has been extensively characterized by ground- and excited-state methods like X-ray crystallography, X-ray absorption spectroscopy, (spectro-)electrochemistry, and steady-state and time-resolved optical absorption spectroscopy, with a particular focus on the stability of the molecular assembly in solution and determination of the excited-state landscape. NMR and UV/Vis spectroscopy reveal dissociation of the dyad in acetonitrile at concentrations below 1 mM and high photostability. Transient absorption spectroscopy after excitation into the metal-to-ligand charge transfer absorption band suggests a relaxation cascade originating from hot singlet and triplet MLCT states, leading to the population of the ³MLCT state that exhibits the longest lifetime. Finally, decay into the ground state involves a ³MC state. Attachment of cobaloxime to the iron photosensitizer increases the ³MLCT lifetime at the iron centre. Together with the directing effect of the linker, this potentially makes the dyad more active in photocatalytic proton reduction experiments than the analogous two-component system, consisting of the iron photosensitizer and Co(dmgH)₂(py)Cl. This work thus sheds new light on the functionality of base metal dyads, which are important for more efficient and sustainable future proton reduction systems.     

Bis(4-benzhydryl-benzoxazol-2-yl)methane – from a Bulky NacNac Alternative to a Trianion in Alkali Metal Complexes

A novel sterically demanding bis(4-benzhydryl-benzoxazol-2-yl)methane ligand 6 (^4−BzhH2BoxCH₂) was gained in a straightforward six-step synthesis. Starting from this ligand monomeric [M(^4-BzhH2BoxCH)] (M=Na ( 7 ), K ( 8₁ )) and dimeric [{M(^4-BzhH2BoxCH)}₂] (M=K ( 8₂ ), Rb ( 9 ), Cs ( 10 )) alkali metal complexes were synthesised by deprotonation. Abstraction of the potassium ion of 8 by reaction with 18-crown-6 resulted in the solvent separated ion pair [{(THF)₂K@(18-crown-6)}{bis(4-benzhydryl-benzoxazol-2-yl)methanide}] ( 11 ), including the energetically favoured monoanionic (E,E)-(^4-BzhH2BoxCH) ligand. Further reaction of ^4−BzhH2BoxCH₂ with three equivalents KH and two equivalents 18-crown-6 yielded polymeric [{(THF)₂K@(18-crown-6)}{K@(18-crown-6)K(^4-BzhBoxCH)}]_n (n→∞) ( 12 ) containing a trianionic ligand. The neutral ligand and herein reported alkali complexes were characterised by single X-ray analyses identifying the latter as a promising precursor for low-valent main group complexes.     

Effect of anionic surfactant on alginate‐chitosan polyelectrolyte multilayer thickness

Alginate and chitosan are among the most common biopolyelectrolytes. Surfactants can be included in alginate and chitosan formulations in order to improve their physical and functional properties. In the present study, the effect of the anionic surfactant sodium dodecyl sulfate (SDS) on alginate‐chitosan polyelectrolyte multilayer (PEM) films is reported for the first time. Layer‐by‐layer deposition technique was employed to prepare the PEM samples and the samples were characterized by ellipsometry, X‐ray reflectivity, atomic force microscopy, and quartz crystal microbalance with dissipation. Incorporation of SDS into PEM formulations increased the film thickness and an increased adsorption behavior between alginate and chitosan layers are observed. Since the concentration of SDS was below its critical micelle concentration, no micelle formation was expected and hydrophobic‐hydrophobic interaction between alginate and SDS might be the main reason. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1798–1803     

About different types of water in swollen polyelectrolyte multilayers

The review addresses swelling of polyelectrolyte multilayers in water. Different models for the determination of the water content are compared. It is clearly shown that voids under dry conditions present cavities for water which contribute to the water content of the multilayer in the swollen state. This so-called “void water” does not lead to any changes in thickness but in scattering length density during swelling. The “swelling water” leads to both changes in scattering length density and in thickness. Depending on the preparation conditions like the type polymers, polymer charge density, ionic strength and type of salt the ratio of “void water” differs between 1 and 15 vol.% while the amount of “swelling water” is of several ten's of vol.%.     

Synthesis and Coordination Behavior of a New Hybrid Bidentate Ligand with Phosphine and Silylene Donors

This work describes the synthesis and coordination behavior of a new mixed-donor ligand PhC(NtBu)₂SiC₆H₄PPh₂ ( 1 ) containing both silylene and phosphine donor sites. Ligand 1 was synthesized from a reaction of ortho-lithiated diphenylphosphinobenzene (LiC₆H₄PPh₂) with chlorosilylene (PhC(NtBu)₂SiCl). Treatment of 1 with Se and GeCl₂ resulted in Si^IV compounds 2 and 3 by selective oxidation of the silylene donor. This strong σ-donor ligand induces dissociation of CuCl and PhBCl₂ leading to formation of ionic complexes 4 and 5 respectively. The reaction of 1 with ZnCl₂ and AlCl₃ resulted in the formation of chelate complexes 5 and 7 , respectively, while treatment with EtAlCl₂ and GaCl₃ forms monodentate complexes 8 and 9 . X-ray analysis of 4 showed that the copper is in the spiro center of the two five-membered rings. Moreover, the copper(I)chloride has not been oxidized but dissociates to Cu⁺ and [CuCl₂]⁻. All the compounds are well characterized by mass spectrometry, elemental analysis, NMR spectroscopy, and single-crystal X-ray diffraction studies.     

Longitudinal 3D Blood Flow Distribution Provided by Diffuse Correlation Tomography during Bone Healing in a Murine Fracture Model

Noninvasive monitoring of vascularization can potentially diagnose impaired bone healing earlier than current radiographic methods. In this study, a noncontact diffuse correlation tomography (DCT) technique was employed to measure longitudinal blood flow changes during bone healing in a murine femoral fracture model. The three-dimensional distribution of the relative blood flow was quantified from one day pre-fracture to 48 days post-fracture. For three mice, frequent DCT measurements were performed every other day for one week after fracture, and then weekly thereafter. A decrease in blood flow was observed in the bone fracture region at one day post-fracture, followed by a monotonic increase in blood flow beyond the pre-injury baseline until five to seven days post-fracture. For the remaining 12 mice, only weekly DCT measurements were performed. Data collected on a weekly basis show the blood flow for most mice was elevated above baseline during the first two post-fracture weeks, followed by a subsequent decrease. Torsional strength of the excised femurs was measured for all 15 mice after 7 weeks of healing. A metric based on the early blood flow changes shows a statistically significant difference between the high strength group and the low strength group.