Structural,optical and electrical properties of undoped and Si-doped AlxGa1−xN thin films on Si (1 1 1) substrate grown by PA-MBE

We have studied the structural properties of undoped and Si-doped Al_xGa_1?xN/GaN/AlN on Si (1 1 1) substrate prepared by plasma-assisted molecular beam epitaxy (PA-MBE) using high-resolution X-ray diffraction (HR-XRD) and atomic force microscopy (AFM). In comparison with undoped AlGaN, the roughness and dislocation density on the surface of the AlGaN layer decrease with Si doping. Full width half maximum (FWHM) of the undoped and Si-doped samples were equal to 0.69° and 0.52°, respectively. This indicates that the Si doping improves the crystalline quality of the Al_xGa_1?xN layer compared with the undoped one. Raman scattering measurement reveals that the optical phonon modes of A₁(LO) and E₂(H) of the AlGaN show a one-mode and two-modes behavior, respectively. The Fourier-transform infrared reflectance (FTIR) investigation confirms the one-mode (two-mode) behavior of the LO (TO) phonon in our samples. This is in good agreement with Raman measurement. Finally, the barrier height (Φ_B) of undoped and Si-doped Al_xGa_1?xN samples was found to be 0.86 and 0.74 eV, respectively.     

Spherically symmetric inhomogeneous dust collapse in higher dimensional space-time and cosmic censorship hypothesis

We consider a collapsing spherically symmetric inhomogeneous dust cloud in higher dimensional space-time. We show that the central singularity of collapse can be a strong curvature or a weak curvature naked singularity depending on the initial density distribution.     

A molecular dynamics method for simulations in the canonical ensemble

A molecular dynamics simulation method which can generate configurations belonging to the canonical (T, V, N) ensemble or the constant temperature constant pressure (T, P, N) ensemble, is proposed. The physical system of interest consists of N particles (f degrees of freedom), to which an external, macroscopic variable and its conjugate momentum are added. This device allows the total energy of the physical system to fluctuate. The equilibrium distribution of the energy coincides with the canonical distribution both in momentum and in coordinate space. The method is tested for an atomic fluid (Ar) and works well.     

Effect of laser irradiation of C-V characteristics of electrodeposited Ag/Tl-2223/CdSe hetero-nanostructures

One of the innovative technological directions for the high-temperature superconductors has been persued by fabricating the heteroepitaxial multilayer structures such as superconductor-semiconductor heterostructures. In the present investigation, metal/superconductor/semiconductor (Ag/Tl-2223/CdSe) hetero-nanostructures have successfully been fabricated using dc electrodeposition technique and were characterized by X-ray diffraction (XRD), full-width at half-maximum (FWHM) and scanning electron microscopy (SEM) studies. The measurement of junction capacitance as a function of biasing voltage was used for the estimation of junction built-in-potential (V _D) and to study the charge distribution in a heterojunction. The Mott-Schottky plots were measured for each junction in dark and under the photo-irradiation. The effect of laser irradiation on C-V characteristics of hetero-nanostructure has been studied.     

Studies on photoinduced effects in pulse-electrodeposited Ag/Hg-1212/CdSe hetero-nanostructures

Metal/superconductor/semiconductor (Ag/Hg-1212/CdSe) hetero-nanostructures have been fabricated using pulse-electrodeposition technique and are characterized by X-ray diffraction (XRD), full-width at half-maximum (FWHM) and scanning electron microscopy (SEM) studies. The junction capacitance of Ag/Hg-1212, Hg-1212/CdSe and Ag/Hg-1212/CdSe heterojunctions is measured in dark and under laser irradiation at room temperature. The nature of the junction formed and built-in-junction potentials were determined. The increase in carrier concentration across the junction due to photo-irradiation has been observed.     

Light-induced absorption instability in weakly reduced congruent Er:LiNbO3 crystal

Light-induced absorption (LIA) characteristics in weakly reduced (or strongly annealed) congruent and/or vapor transport equilibration (VTE)-treated Er-doped LiNbO₃ crystals have been investigated in comparison with their corresponding as-grown ones and undoped crystals by using a polarized 632.8-nm beam as probe light and another polarized 632.8- or 488-nm beam as pump light. Under He-Ne pump, the LIA was observed only in strongly reduced pure VTE LiNbO₃ crystal. Under 488-nm pump, LIA is still not observed in the doped or undoped as-grown crystals. The weakly reduced VTE-treated Er(0.2 mol %):LiNbO₃ crystal displays weak and stable LIA. On the other hand, the corresponding weakly reduced congruent crystal displays a rather unpredictable light-induced absorption instability phenomenon. The instability was shown by the random competition of the LIA and light-induced transparency (LIT). When both crystals were further reduced, the VTE sample still shows stable LIA but with increased LIA, while the LIA in the congruent sample also becomes stable enough. The instability was experimentally proved to be associated with the presence of the Er³⁺ ion that performs the role of an extrinsic defect instead of photoluminescence. A three-level model is suggested that consists of a deep level (the bipolaron) and two shallow levels: the small polaron level and the level with respect to the Er³⁺ ion. The model has been employed to qualitatively explain the LIA characteristics of the weakly reduced congruent Er:LiNbO₃ crystal, including the the instability, the effect of the state of reduction, the pump intensity and the pump–probe polarization dependences. The inhomogeneity of the defects caused by the weak reduction and the simultaneous participation of the two shallow levels in the light-induced electron-transport process result in the random competition between LIA and LIT, and consequently result in the LIA instability. PACS 42.70.Hj; 42.70.Ln; 42.70.Mp; 42.65.Hw; 81.05.-t     

Thermodynamic possibilities and constraints of pure hydrogen production by a chromium,nickel, and manganese-based chemical looping process at lower temperatures

The reduction of chromium, nickel, and manganese oxides by hydrogen, CO, CH₄, and model syngas (mixtures of CO + H₂ or H₂ + CO + CO₂) and oxidation by water vapor has been studied from the thermodynamic and chemical equilibrium point of view. Attention was concentrated not only on the convenient conditions for reduction of the relevant oxides to metals or lower oxides at temperatures in the range 400–1000 K, but also on the possible formation of soot, carbides, and carbonates as precursors for the carbon monoxide and carbon dioxide formation in the steam oxidation step. Reduction of very stable Cr₂O₃ to metallic Cr by hydrogen or CO at temperatures of 400–1000 K is thermodynamically excluded. Reduction of nickel oxide (NiO) and manganese oxide (Mn₃O₄) by hydrogen or CO at such temperatures is feasible. The oxidation of MnO and Ni by steam and simultaneous production of hydrogen at temperatures between 400 and 1000 K is a difficult step from the thermodynamics viewpoint. Assuming the Ni—NiO system, the formation of nickel aluminum spinel could be used to increase the equilibrium hydrogen yield, thus, enabling the hydrogen production via looping redox process. The equilibrium hydrogen yield under the conditions of steam oxidation of the Ni—NiO system is, however, substantially lower than that for the Fe—Fe₃O₄ system. The system comprising nickel ferrite seems to be unsuitable for cyclic redox processes. Under strongly reducing conditions, at high CO concentrations/partial pressures, formation of nickel carbide (Ni₃C) is thermodynamically favored. Pressurized conditions during the reduction step with CO/CO₂ containing gases enhance the formation of soot and carbon-containing compounds such as carbides and/or carbonates.     

Cyclisation of α,ω-dienes promoted by bis(indenyl)zirconium sandwich and ansa-titanocene dinitrogen complexes

Metallation of a variety of α,ω-dienes has been explored with an η(9),η(5)-bis(indenyl)zirconium sandwich compound and an ansa-titanocene dinitrogen complex. The η(9),η(5)-bis(indenyl)zirconium sandwich compound, (η(9)-C(9)H(5)-1,3-Pr(2))(η(5)-C(9)H(5)-1,3-(i)Pr(2))Zr, served as an isolable source of Negishi's reagent and readily formed a kinetic mixture of cis and trans diastereomers of the corresponding zirconacyclopentanes upon diene metallation. For pure hydrocarbon substrates such as 1,6-heptadiene and 1,7-octadiene, an equimolar amount of cis and trans diastereomers were the kinetic products; isomerization to the thermodynamically favoured trans isomers was observed over time at ambient temperature or upon heating to 105 °C, respectively. By contrast, substitution of the methylene or ethylene spacer in the α, ω-diene with a fluorenyl group (e.g. 9,9-diallylfluorene) resulted in exclusive kinetic formation of the trans diastereomer. Amino-substituted dienes were also readily cyclised and one example was characterised by single-crystal X-ray diffraction. Similar studies were also conducted with the ansa-titanocene dinitrogen complex, [Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Ti](2)(μ(2),η(1),η(1)-N(2)), and both kinetic and thermodynamic selectivities evaluated. The use of a C(1) symmetric ansa-metallocene increases the number of isomeric possibilities. For diallyl tert-butyl amine, diene metallation was more selective than for the bis(indenyl)zirconium sandwich compound and isomerization was also more rapid. Preliminary functionalisation reactivity for both the zircona- and titanocycles was also explored.     

Synthesis and Reactions of Some New Pyrrolylfuro[2,3‐d]Pyrimidines and Pyrrolopyrazinofuropyrimidines

5‐Amino‐4‐methyl‐2‐phenyl‐6‐substitutedfuro[2,3‐d]pyrimidines ( 2a‐c ) were reacted with 2,5‐dimethoxytetrahydrfuran to afford the pyrrolyl derivatives 3a‐c . Compound 3a was chosen as intermediate for the synthesis of poly fused heterocycles incorporated furopyrimidines moiety 4–11 . Some of the synthesized compounds were screened for their antibacterial and antifungal activities.