Effect of secondary electrons from latent tracks created in YBCO by swift heavy ion irradiation

Swift heavy ions (SHI) with electronic energy loss exceeding a value of 14.4 keVnm⁻¹ create amorphized latent tracks in YBCO type superconductors. In the low fluence regime of an ion beam where tracks do not overlap, a decrease of the superconducting transition temperature as probed through resistivity studies, is not expected due to availability of percolating current paths. The present study however shows T_c decrease by about 1–3 K in thin films of YBCO when irradiated by 250 MeVAg ions at 79 K at a fluence of 5×10¹⁰–1×10¹² ionscm⁻². The highest fluence used in the present study is three times less than the fluence where track overlapping becomes significant. The T_c tends to increase towards the preirradiation value on annealing the films at room temperature. To explain this unusual result, we consider the effect of ion irradiation in inducing materials modification not only through creation of amorphized latent tracks along the ion path, but also through creation of atomic disorder in the oxygen sublattice in the Cu–O chains of YBCO by the secondary electrons. These electrons are emitted radially from the tracks during the passage of the SHI. Considering the correlation between the charge state of copper and its oxygen coordination, we show in particular that the latter process is a consequence of the inelastic interaction of the SHI induced low-energy secondary electrons with the YBCO lattice, which result in chain oxygen disorder and T_c decrease.     

Kinetics and mechanism of the reactions of hexaaqua rhodium (III) with sulphur (IV) in aqueous medium

An O-bonded sulphito complex, Rh(OH₂)₅(OSO₂H)²⁺, is reversibly formed in the stoppedflow time scale when Rh(OH₂) ₆ ³⁺ and SO₂/HSO ₃ ⁻ buffer (1 <pH< 3) are allowed to react. For Rh(OH₂)₅OH₂₊+ SO₂ □ Rh(OH₂)₅(OSO₂H)²⁺ (k₁/k_-1), k₁ = (2.2 ±0.2) × 10³ dm³ mol⁻¹ s⁻¹, k₋1 = 0.58 ±0.16 s⁻¹ (25°C,I = 0.5 mol dm⁻³). The protonated O-sulphito complex is a moderate acid (K _d = 3 × 10⁻⁴ mol dm⁻³, 25°C, I= 0.5 mol dm⁻³). This complex undergoes (O, O) chelation by the bound bisulphite withk= 1.4 × 10⁻³ s⁻¹ (31°C) to Rh(OH₂)₄(O₂SO)⁺ and the chelated sulphito complex takes up another HSO ₃ ⁻ in a fast equilibrium step to yield Rh(OH₂)₃(O₂SO)(OSO₂H) which further undergoes intramolecular ligand isomerisation to the S-bonded sulphito complex: Rh(OH₂)₃(O₂SO)(OSO₂)^- → Rh(OH₂)₃(O₂SO)(SO₃)⁻ (k _iso = 3 × 10⁻⁴ s⁻¹, 31°C). A dinuclear (μ-O, O) sulphite-bridged complex, Na₄[Rh₂(μ-OH)₂(OH)₂(μ-OS(O)O)(O₂SO)(SO₃) (OH₂)]5H₂O with (O, O) chelated and S-bonded sulphites has been isolated and characterized. This complex is sparingly soluble in water and most organic solvents and very stable to acid-catalysed decomposition     

Reactions of sulfur(IV) with an octahedral manganese(IV) complex of 1,8-bis(2-hydroxy benzamido)-3,6-diaza octane: the role of phenolate–amide–amine coordination

The Mn^IV complex of tetra-deprotonated 1,8-bis(2-hydroxybenzamide)-3,6-diazaoctane (Mn^IVL) engrossed in phenolate-amido-amine coordination is reduced by HSO₃⁻ and SO₃²⁻ in the pH range 3.15–7.3 displaying biphasic kinetics, the Mn^IIIL⁻ being the reactive intermediate. The Mn^IIIL⁻ species has been characterized by u.v.–vis. spectra {λ _max, (ε, dm³ mol⁻¹ cm⁻¹): 285(15 570), 330 sh (7570), 469(6472), 520 sh (5665), pH=5.42}. SO₄²⁻ was the major oxidation product of S^IV; dithionate is also formed (18 ± 2% of [Mn^IV]_T) which suggests that dimerisation of SO₃^−• is competitive with its fast oxidation by Mn^IV/III. The rates and activation parameters for Mn^IVL + HSO₃⁻ (SO₃²⁻) → Mn^IIIL⁻; Mn^IIIL⁻ + HSO₃⁻ (SO₃²⁻) → Mn^IIL²⁻ are reported at 28.5–45.0 °C (I=0.3 mol dm⁻³, 10% (v/v) MeOH + H₂O). Reduction by SO₃²⁻ is ca. eight times faster than by HSO₃⁻ both for Mn^IVL and Mn^IIIL⁻. There was no evidence of HSO₃⁻/SO₃²⁻ coordination to the Mn centre indicating an outer sphere (ET) mechanism which is further supported by an isokinetic relationship. The self exchange rate constant (k₂₂) for the redox couple, Mn^IIIL⁻/Mn^IVL (1.5 × 10⁶ dm³ mol⁻¹ s⁻¹ at 25 °C) is reported.     

Kinetics and mechanism of the complex formation between oxalatopentaamminecobalt(III) and aluminium(III) and gallium(III); a comparative study

Summary The reversible complex formation between oxalatopentaammine cobalt(III), aluminium(III) and gallium(III) was investigated by the stopped flow technique at 30 ± 0.1 °C and I = 1.0 mol dm^–3. The reactivity sequence: Ga^III > Al^III is observed, however, the major path for gallium(III) was (NH3)₅CoC₂O₄H²⁺ + GaOH²⁺ (NH₃)₅CoC₂O₄-Ga⁴⁺ + H₂O. The formation and dissociation rate constants of the binuclear species have been compared with the analogous data for iron(III) and nickel(II) reported earlier. The results reflect the fact that the half-bonded exalato moiety of (NH₃)₅CoC₂O _inf4 ^p+ acts as a chelating agent for the metal ions.Author to whom all correspondence should be directed.     

Determination of trace metallic impurities in high-purity quartz by ion chromatography

A method has been developed for the determination of relevant trace impurities (alkali, alkaline and transition metals) in high purity quartz by ion-chromatography. In situ reagent (HF) purification and simultaneous sample dissolution was achieved in a multichannel vapour phase digestion assembly. Twenty-one samples can be digested at a time in this vapour phase system. Significant decrease in the process blank levels for all the analytes was observed. Drastic reduction (250 times) of NH4+ blank was achieved in the described vapour phase digestion, which enables the determination of trace concentration of sodium in high purity quartz. After volatilisation of the matrix and unreacted HF, the clear water leached solutions were injected into an ion-chromatograph equipped with conductivity detector for the determination of alkali and alkaline earth metals. In the case of transition metals, the trace residues were leached with 10 mM HCl and after separation on a mixed bed analytical column (IonPac CS5) were detected by spectrophotometry after post column derivatisation using 4-(2-pyridylazo)resorcinol (PAR). The accuracy of the result was checked by their comparison with those obtained by independent methods like inductively coupled plasma (ICP) MS and ICP atomic emission spectrometry. The achievable detection limits are between 0.4 ng/g (Li) and 22 ng/g (Mn). The application of the method to the determination of the above trace metals in two high-purity-grade quartz samples is demonstrated.     

A novel and expeditious approach to unusual spirolactam building blocks

A rapid access to 7-azaspiro[4.5]decan-6-ones 1 involving three regio- and chemoselective reactions starting from tetrabromonorbornyl derivatives is described. The alkaline H(2)O(2) cleavage reaction of monosubstituted alpha-diketones 9 furnished the potential bridged bicyclic lactones 10in a highly regio- and stereoselective manner. The radical-mediated, intermolecular bridgehead C-C bond formation of the versatile bridged lactones 10 with acrylonitrile followed by LAH reduction of the adduct 13 intriguingly leads to the formation of novel spirolactam building blocks 1.     

Physico-chemical properties of the sodium salts of some fatty acids in formamide solution in the temperature range 15–45°C

The thermal stability of some boracites, CuB₇O₁₃Cl, NiB₇O₁₃Br and FeB₇O₁₃I, was investigated using thermogravimetry in air up to 1000°, DTA in air to 1200° and evolved gas analysis in vacuum to 1200°C. Only the FeI compound showed weight loss below 1000°C. The endothermic peaks associated with melting were CuCl (1025°C), NiBr (1150°C) and FeI) (965°C). Evolved gas analysis indicated major differences in the decomposition products of the three materials.     

Thermodynamics of silver—silver halide electrodes and thermodynamic solubility products of silver halides in glycerol + water mixtures at different temperatures

The standard potentials of silver—silver bromide and silver—silver iodide electrodes in glycerol+water mixtures containing 5, 10, 20 and 30 wt% glycerol were determined from electromotive force measurements of the cell Ag(s), AgX(s), KX(c)//KCl(c), AgCl(s), Ag(s), where X is Br or I, at seven different temperatures in the range 5–35°C. The standard potentials in each solvent are represented as a function of temperature. The standard thermodynamic functions for the electrode reactions, the primary medium effects of various solvents upon X⁻, and the standard thermodynamic quantities for the transfer of 1 g-ion of X⁻ from water to the respective glycerol + water media are evaluated and discussed in the light of ion—solvent interactions as well as the structural changes of the solvents. From the values of the Ag/Ag⁺ and Ag/AgX, X⁻ electrodes, the thermodynamic solubility product constants of silver chloride, silver bromide and silver iodide have been determined in glycerol + water solvent mixtures at different temperatures.