Multiply doped nanostructured silicate sol-gel thin films: spatial segregation of dopants, energy transfer, and distance measurements

Physical and chemical strategies that place designed molecules in spatially separated regions of surfactant-templated mesostructured silicate thin films are used to prepare films containing rhodamine 6G (R6G), lanthanide complexes, and both simultaneously. Fluorescence and photoexcitation spectra of R6G in amorphous and structured thin films show that it is located inside the surfactant micelles of structured thin films. A silylated ligand that binds lanthanides condenses to form part of the silica framework and causes the lanthanide to localize in the silica. Luminescence and photoexcitation spectra show that energy transfer from the metal complex to R6G occurs in the films. R6G quenches Tb emission in a concentration-dependent manner. Energy transfer efficiency is calculated using the Tb luminescence lifetime, and this quantity is used to calculate the distance between Tb and R6G with the aid of Forster theory.     

Synthesis of Fe—Ni—Ce trimetallic catalyst nanoparticles via impregnation and co-precipitation and their application to dye degradation

In this study, trimetallic catalysts were prepared via the co-precipitation and impregnation methods. In order to investigate the effect of impregnation on the catalytic activity and crystallite size, a trimetallic catalyst, Fe—Ni—Ce, was prepared through the co-precipitation method in one set of experiments, and cerium was impregnated with the Ni—Fe mixture in the final stage of the preparation in another set. Fourier transform infrared spectroscopy was employed to confirm the formation of trimetallic catalysts and the success of the impregnation method. The Brunauer-Emmett-Teller nitrogen adsorption isotherm exhibits a high specific surface area (approximately 39 m² g^?1) for the nanoparticles obtained by the impregnation method. The crystallography and morphology of the trimetallic catalysts thus prepared were characterised by X-ray diffraction and scanning electron microscopy. UV-VIS spectroscopy and methylene blue dye degradation tests were also performed to investigate the catalytic activity of the synthesised catalysts. The crystalline size was found to be smaller for the catalysts prepared by the impregnation method. In addition, the samples synthesised using the cerium impregnation method showed superior activity in the methylene blue dye degradation test. The effect of the catalyst dosage on dye degradation, as well as the effect of the initial dye concentration on the catalyst activity, was also studied for both methods.     

Chlorine‐Enhanced Surface Mobility of Au(100)

Motivated by experimental studies of two‐dimensional Ostwald ripening on Au(100) electrodes in chlorine‐containing electrolytes, we have studied diffusion processes using density functional theory. We find that chlorine has a propensity to temporary form AuCl complexes, which diffuse significantly faster than gold adatoms. With and without chlorine, the lowest activation energy is found for the exchange mechanism. Chlorine furthermore reduces the activation energy for the detachment from kink sites. Kinetic Monte Carlo simulations were performed on the basis of extensive density functional theory calculations. The island‐decay rate obtained from these Monte Carlo simulations, as well as the decay rate obtained from the theoretical activation energies and frequency factors when inserted into analytical solutions for Ostwald ripening, are in agreement with experimental island‐decay rates in chlorine‐containing electrolytes.     

Synthesize,Characterization and Application of Phosphine‐free Polymer Supported Palladium Nanoparticles as Effective Catalyst in Suzuki‐Miyaura Cross‐coupling Reactions

Heterogeneous catalysts were developed by supporting palladium nanoparticles on modified cross‐linked polyacrylamide and successfully applied in Suzuki‐Miyaura cross‐coupling reactions. These catalysts are stable to air and moisture, and no sign of metal leaching was detected during the reactions as judged by elemental analysis of palladium by ICP‐OES technique and hot filtration test, which demonstrates the heterogeneous character of the catalysts. High yields of desired products were resulted by using these phosphine‐free catalysts at temperatures below 80 °C without aid of any additional ligands. The heat stability of the catalysts at the operating temperature was confirmed by thermogravimetric analysis (TGA). These catalysts are easy to use and cost effective. They can be recovered from reaction mixture by a simple filtration and reused in more successive reactions without significant loss in activity. The catalyst activity was restored by an ultrasonication program after deactivation in 10 cycles.     

Placement and characterization of pairs of luminescent molecules in spatially separated regions of nanostructured thin films

Methods of making mesostructured sol-gel silicate thin films containing two different molecules deliberately placed in two different spatially separated regions in a one-step, one-pot preparation are developed and demonstrated. When the structure-directing agent is the surfactant cetyltrimethylammonium bromide, the structure is 2-D hexagonal with lattice spacings between 31.6 and 42.1 angstroms depending on the dopant molecules and their concentrations. The three general strategies that are used to place the molecules are philicity (like dissolves like), bonding, and bifunctionality. These strategies take advantage of the different chemical and physical properties of the regions of the films. These regions are the inorganic silicate framework, the hydrophobic organic interior of the micelles, and the ionic interface between them. Luminescent molecules that possess the physical and chemical properties appropriate for the desired strategies are chosen. Lanthanide and ruthenium complexes with condensable trialkoxysilane groups are incorporated into the silicate framework. 1,4-Naphthoquinone, pyrene, rhodamine 6G and coumarin 540A, and lanthanides with no condensable trialkoxysilanes occupy the hydrophobic core of micelles by virtue of their hydrophobicity. The locations of the molecules are determined by luminescence spectroscopy and by luminescence lifetime measurements. In all cases, the long-range order templated into the thin film is verified by X-ray diffraction. The simultaneous placement of two molecules in the structured film and the maintenance of long-range order require a delicate balance among film preparation methodology, design of the molecules to be incorporated in specific regions, and concentrations of all of the species.     

Deformation parameter changes in fission mass yields within the systematic statistical scission-point model

The fission fragment mass-yields are evaluated for pre-actinide and actinide isotopes using a systematic statistical scission point model. The total potential energy of the fissioning systems at the scission point is presented in approximate relations as functions of mass numbers,deformation parameters and the temperature of complementary fission fragments. The collective temperature, Tcoll, and the temperature of fission fragments, Ti, are separated and the effect of collective temperature on mass yields results is investigated. The fragment temperature has been calculated with the generalized superfluid model. The sum of deformation parameters of complementary fission fragments has been obtained by fitting the calculated results with the experimental data. To investigate the transitions between symmetric and asymmetric modes mass yields for pre-actinide and heavy actinides are calculated with this model. The transition from asymmetric to symmetric fission is well reproduced using this systematic statistical scission point model. The calculated results are in good agreement with the experimental data with Tcoll= 2 Me V at intermediate excitation energy and with T_(coll)= 1MeV for spontaneous fission.Despite the Langevin model, in the scission point model, a constraint on the deformation parameters of fission fragments has little effect on the results of the mass yield.     

A review on wound dressings with an emphasis on electrospun nanofibrous polymeric bandages

Wound dressings have experienced continuous and significant changes since the ancient times. The development starts with the use of natural materials to simply cover the wounds to the materials of the present time that could be specially made to exhibit various extraordinary functions. The modern bandage materials made of electrospun biopolymers contain various active compounds that are beneficial to the healing of wounds. These materials are fibrous in nature, with the size of fibers segments ranging from tens of nanometers to micrometers. With the right choices of biopolymers used for these fibrous materials, they could enhance the healing of wounds significantly compared with the conventional fibrous dressing materials, such as gauze. These bandages could be made such that they contain bioactive ingredients, such as antimicrobial, antibacterial, and anti‐inflammatory agents, which could be released to the wounds enhancing their healing. In an active wound dressing (AWD), the main purpose is to control the biochemical states of a wound in order to aid its healing process. This review provides an overview of different types of wounds, effective parameters in wound healing and different types of wound dressing materials with a special emphasis paid to those prepared by electrospinning. Copyright © 2009 John Wiley & Sons, Ltd.     

Simultaneous determination of antazoline and naphazoline by the net analyte signal standard addition method and spectrophotometric technique

A novel net analyte signal standard addition method (NASSAM) was used for simultaneous determination of the drugs anthazoline and naphazoline. The NASSAM can be applied for determination of analytes in the presence of known interferents. The proposed method is used to eliminate the calibration and prediction steps of multivariate calibration methods; the determination is carried out in a single step for each analyte. The accuracy of the predictions against the H-point standard addition method is independent of the shape of the analyte and interferent spectra. The net analyte signal concept was also used to calculate multivariate analytical figures of merit, such as LOD, selectivity, and sensitivity. The method was successfully applied to the simultaneous determination of anthazoline and naphazoline in a commercial eye drop sample.     

An evaluation scheme for nanotechnology policies

Dozens of countries are executing national nanotechnology plans. No rigorous evaluation scheme for these plans exists, although stakeholders—especially policy makers, top-level agencies and councils, as well as the society at large—are eager to learn the outcome of these policies. In this article, we recommend an evaluation scheme for national nanotechnology policies that would be used to review the whole or any component part of a national nanotechnology plan. In this scheme, a component at any level of aggregation is evaluated. The component may be part of the plan’s overarching policy goal, which for most countries is to create wealth and improve the quality of life of their nation with nanotechnology. Alternatively, the component may be a programme or an activity related to a programme. The evaluation could be executed at different times in the policy’s life cycle, i.e., before the policy is formulated, during its execution or after its completion. The three criteria for policy evaluation are appropriateness, efficiency and effectiveness. The evaluator should select the appropriate qualitative or quantitative methods to evaluate the various components of national nanotechnology plans.