Preparation and Characterization of Bhant Leaves‐derived Nitrogen‐doped Carbon and its Use as an Electrocatalyst for Detecting Ketoconazole

In this study, the electrocatalytic characteristics of nitrogen‐doped carbon (NDC) prepared from Clerodendrum Infortunatum L leaves on a glassy carbon electrode (GCE) surface was evaluated with regards to its ability to detect the electroactive drug ketoconazole (KCZ). The NDC was prepared by carrying out a simple pyrolysis of dry powder of the leaves at 850 °C. The prepared NDC was characterized using field‐emission scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and Brunauer‐Emmett‐Teller analysis, and was then used as an electrode material. The performance of the electrochemical KCZ sensor with the NDC‐modified glassy carbon electrode (NDC/GCE) was found to be optimal when using PBS buffer at pH 3 and a concentration of 0.1 mg/ml of NDC in the conjugate with Nafion polymer. Under these conditions, the NDC/GCE displayed a KCZ detection limit of 3 μM and a linear dependence of its response on KCZ concentration over a wide range of KCZ concentrations from 47 μM to 752 μM (R²=0.9742). These results confirmed the potential of NDC as an electrocatalyst.     

A solid-supported acidic oxazolium perchlorate as an easy-handling catalyst for the synthesis of modified pyrimidine nucleosides via Vorbrüggen-type N-glycosylation

A solid-supported acidic oxazolium perchlorate was investigated as a heterogeneous catalyst in N-glycosylation reactions using silylated modified pyrimidines and an acylated ribose or glucose to afford the corresponding pyrimidine nucleosides. This salt is a nonhygroscopic and stable powder whose activity is comparable to that of 2-methyl-5-phenylbenzoxazolium perchlorate. A reaction with this polymer catalyst can be conducted on a gram scale. Reusability of the solid-supported catalyst was also investigated.     

The Direct Partial Oxidation of Methane to Dimethyl Ether over Pt/Y2O3 Catalysts Using an NO/O2 Shuttle

Using a mixture of NO + O₂ as the oxidant enabled the direct selective oxidation of methane to dimethyl ether (DME) over Pt/Y₂O₃. The reaction was carried out in a fixed bed reactor at 0.1 MPa over a temperature range of 275–375 °C. During the activity tests, the only carbon‐containing products were DME and CO₂. The DME productivity (μmol g_cat^?1 h^?1) was comparable to oxygenate productivities reported in the literature for strong oxidants (N₂O, H₂O₂, O₃). The NO + O₂ mixture formed NO₂, which acted as the oxygen atom carrier for the ultimate oxidant O₂. During the methane partial oxidation reaction, NO and NO₂ were not reduced to N₂. In situ FTIR showed the formation of surface nitrate species, which are considered to be key intermediate species for the selective oxidation.     

Simulation of flux dynamics in a superconducting bulk magnetized by multi-pulse technique

We have simulated the time and spatial dependence of local field B_z(t, r) and temperature T(t, r) on the superconducting bulk during pulsed field magnetization (PFM) using the finite element method (FEM). A modified multi-pulse technique with step-wise cooling (MMPSC) was performed to the cryo-cooled bulk, which was experimentally confirmed to the effective PFM technique to enhance the trapped field B_z higher than 5 T. In the simulation, the B_z value at the center of the bulk surface was enhanced at the 2nd stage of the MMPSC method, in which the results of the simulation reproduced the experimental ones. The enhancement of B_z results from the reduction in the temperature because of the already trapped flux in the bulk at the 1st stage of the MMPSC method.     

Stereospecific synthesis and redox properties of ruthenium(II) carbonyl complexes bearing a redox-active 1,8-naphthyridine unit

Two stereoisomers of cis-[Ru(bpy)(pynp)(CO)Cl]PF₆ (bpy = 2,2′-bipyridine, pynp = 2-(2-pyridyl)-1,8-naphthyridine) were selectively prepared. The pyridyl rings of the pynp ligand in [Ru(bpy)(pynp)(CO)Cl]⁺ are situated trans and cis, respectively, to the CO ligand. The corresponding CH₃CN complex ([Ru(bpy)(pynp)(CO)(CH₃CN)]²⁺) was also prepared by replacement reactions of the chlorido ligand in CH₃CN. Using these complexes, ligand-centered redox behavior was studied by electrochemical and spectroelectrochemical techniques. The molecular structures of pynp-containing complexes (two stereoisomers of [Ru(bpy)(pynp)(CO)Cl]PF₆ and [Ru(pynp)₂(CO)Cl]PF₆) were determined by X-ray structure analyses.     

Ion-Selective Electrodes Based on Bilayer Film Coating

The electrode characteristics of ion-selective electrodes (ISEs) for K⁺, Na⁺, NH₄ ⁺, and Ca²⁺ based on bilayer film coatings, where the inner layer films are electroactive electropolymerized ones and the outer layer films are composed of conventional ion-sensitive materials, have been examined. These ISEs of the coated-wire electrode type have no conventional internal reference solution and reference electrode, but the inner films may be considered to function as the “internal standard solution.” The ion selectivity coefficients and the activity range showing Nernstian response were almost comparable to those of conventional liquid-membrane electrodes. The bilayer-coated ISEs showed insensitivity to O₂ and CO₂, long-term stability, and little drift. It was also found that the electrode performance is practically unchanged after sterilization in an autoclave. The results demonstrate that the bilayer-coated ISEs examined are promising for the determination of K⁺, Na⁺, NH₄ ⁺, or Ca²⁺ activity in biological and environmental systems.     

Water‐disintegrative and biodegradable blends containing poly(L‐lactic acid) and poly(butylene adipate‐co‐terephthalate)

In this study, novel biodegradable materials were successfully generated, which have excellent mechanical properties in air during usage and storage, but whose structure easily disintegrates when immersed in water. The materials were prepared by melt blending poly(L ‐lactic acid) (PLLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) with a small amount of oligomeric poly(aspartic acid‐co‐lactide) (PAL) as a degradation accelerator. The degradation behavior of the blends was investigated by immersing the blend films in phosphate‐buffered saline (pH = 7.3) at 40 °C. It was shown that the PAL content and composition significantly affected morphology, mechanical properties, and hydrolysis rate of the blends. It was observed that the blends containing PAL with higher molar ratios of L ‐lactyl [LA]/[Asp] had smaller PBAT domain size, showing better mechanical properties when compared with those containing PAL with lower molar ratios of [LA]/[Asp]. The degradation rates of both PLLA and PBAT components in the ternary blends simultaneously became higher for the blends containing PAL with higher molar ratios of [LA]/[Asp]. It was confirmed that the PLLA component and its decomposed materials efficiently catalyze the hydrolytic degradation of the PBAT component, but by contrast that the PBAT component and its decomposed materials do not catalyze the hydrolytic degradation of the PLLA component in the blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

纳米铂直接修饰玻碳电极的制备及在半胱氨酸中的电化学行为

采用一步化学原位还原法将球形纳米铂颗粒直接修饰在玻碳电极上,用SEM、EDS和电化学方法对该电极进行表征并与铂片电极、裸玻碳电极进行了对比。结果表明,纳米铂修饰电极的峰电流与扫描速度呈线性关系,纳米铂在电极表面覆盖率为1.28×10-7mol/cm2。循环伏安法研究结果表明纳米铂修饰电极对半胱氨酸的催化氧化作用和铂片电极相比提高了数倍,且峰电位负移了0.3V。在纳米铂修饰的玻碳电极上,半胱氨酸的浓度在1.0×10-7mol/L到1.0×10-5mol/L范围内和催化电流呈线性关系。     

The anomalous behaviour of Gd atoms (Fe1−xMnx)2 compounds

The educed Gd atoms in the X-structure (Th₆Mn₂₃-type) of Gd(Fe_1−xMn_x)₂ were magnetically investigated by comparing with Gd₆(Fe_1−yMn_y)₂₃ whose structure is Th₆Mn₂₃-type. The magnetic properties of Gd(Fe_1−xMn_x)₂ (0.4≤x≤0.7) were observed to be quite similar to those of Gd₆(Fe_1−yMn_y)₂₃ (0.4≤y≤0.7).     

An enzyme-linked immunometric assay for cortisol based on idiotype-anti-idiotype reactions

Cortisol levels in body fluids are useful for monitoring the function of the pituitary-adrenal axis. Here, we established an “enzyme-linked immunometric assay” (a noncompetitive-type ELISA) for cortisol based on idiotype-anti-idiotype reactions. Six different anti-idiotype monoclonal antibodies that recognized the variable regions of a newly established anti-cortisol antibody were generated using hybridoma technology; these were two β-type and four α-type anti-idiotype antibodies, recognizing the paratope and framework regions, respectively. An immunometric assay was established using a combination of a selected α-type and a selected β-type antibody. The analyte (cortisol) was captured by an excess amount of anti-cortisol antibody immobilized on microplates, and the unoccupied paratope was saturated with the β-type antibody. Hapten-occupied anti-cortisol antibody, with less steric hindrance, was then selectively bound by the α-type antibody, labeled with biotin. The amount of biotin residue on the microplates was colorimetrically monitored using a peroxidase-labeled streptavidin. This assay had an approximately threefold higher sensitivity (detection limit: 90 pg = 248 fmol cortisol) than a competitive ELISA using the same anti-cortisol antibody, as well as a practical specificity for providing reasonable determination of normal urinary cortisol levels.