Macroscopic Polarization Change of Mononuclear Valence Tautomeric Cobalt Complexes Through the Use of Enantiopure Ligand

The crystallization of a complex having electron transfer properties in a polar space group can induce the polarization switching of a crystal in a specific direction, which is attractive for the development of sensors, memory devices, and capacitors. Unfortunately, the probability of crystallization in a polar space group is usually low. Noticing that enantiopure compounds crystallize in Sohncke space groups, this paper reports a strategy for the molecular design of non-ferroelectric polarization switching crystals based on the use of intramolecular electron transfer and chirality. In addition, this paper describes the synthesis of a mononuclear valence tautomeric (VT) cobalt complex bearing an enantiopure ligand. The introduction of enantiomer enables the crystallization of the complex in the polar space group (P2₁). The polarization of the crystals along the b-axis direction is not canceled out and the VT transition is accompanied by a change in the macroscopic polarization of the polar crystal. Polarization switching via electron transfer is realized at around room temperature.     

HPLC with fluorescence detection assay of perampanel,a novel AMPA receptor antagonist,in human plasma for clinical pharmacokinetic studies

Perampanel (Fycompa®), a novel α‐amino‐3‐hydroxy‐5‐methyl‐4‐isoxazolepropionic acid (AMPA) receptor antagonist, is registered for the adjunctive treatment of patients (aged ≥12 years) with refractory partial‐onset seizures. To support therapeutic drug monitoring, a simple high‐performance liquid chromatography (HPLC) assay with fluorescence detection was developed to determine perampanel concentrations in human plasma and validated to support clinical trials. Human plasma samples (1.0 mL) were processed by liquid extraction using diethyl ether, followed by chromatographic separation on a YMC Pack Pro C₁₈ column (150 × 4.6 mm i.d., 5 µm) with isocratic elution of acetonitrile–water–acetic acid–sodium acetate (840:560:3:1.8, v/v/v/w) at a flow rate of 1.0 mL/min. Column eluent was monitored at excitation and emission wavelengths of 290 and 430 nm, respectively. The assay was linear (range 1.0–500 ng/mL) and this could be extended to 25 µg/mL by 50‐fold dilution integrity. No endogenous peaks were detected in the elution of analytes in drug‐free blank human plasma from six individuals and no interference was observed with co‐medications tested. Intra‐ and inter‐batch reproducibility studies demonstrated accuracy and precision within the acceptance criteria of bioanalytical guidelines. Validation data demonstrated that our assay is simple, selective, reproducible and suitable for therapeutic drug monitoring of perampanel. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of C12-Keto Saxitoxin Derivatives with Unusual Inhibitory Activity Against Voltage-Gated Sodium Channels

A novel series of C12-keto-type saxitoxin (STX) derivatives bearing an unusual nonhydrated form of the ketone at C12 has been synthesized, and their Na_V-inhibitory activity has been evaluated in a cell-based assay as well as whole-cell patch-clamp recording. Among these compounds, 11-benzylidene STX ( 3 a ) showed potent inhibitory activity against neuroblastoma Neuro 2A in both cell-based and electrophysiological analyses, with EC₅₀ and IC₅₀ values of 8.5 and 30.7 nm , respectively. Interestingly, the compound showed potent inhibitory activity against tetrodotoxin-resistant subtype of Na_V1.5, with an IC₅₀ value of 94.1 nm . Derivatives 3 a – d and 3 f showed low recovery rates from Na_V1.2 subtype (ca 45–79 %) compared to natural dcSTX ( 2 ), strongly suggesting an irreversible mode of interaction. We propose an interaction model for the C12-keto derivatives with Na_V in which the enone moiety in the STX derivatives 3 works as Michael acceptor for the carboxylate of Asp¹⁷¹⁷.     

Total Synthesis of Terpioside B

The first total synthesis of terpioside B ( 1 ) has been accomplished. Key steps include the stereoselective installments of a set of challenging 1,2-cis-glycosidic linkages. Thus, α(1,4)-linked d -galactoside was effectively constructed from a 1,2-anhydrogalactose donor and an unprotected 1,6-anhydrogalactose acceptor by using a boron-mediated aglycon delivery (BMAD) method. In addition, α-l -fucofuranosides were stereoselectively and simultaneously constructed by remote group-assisted 1,2-cis-α-stereoselective glycosylations.     

Asymmetric electrosynthesis: Recent advances in catalytic transformations

Asymmetric synthesis is one of the most important and valuable research fields in modern organic chemistry. Since the use of electricity as a traceless oxidant or reductant under electrochemical conditions, highly reactive intermediates can selectively generate under mild reaction conditions through more environmentally benign conditions compared with the reactions using common chemical oxidants or reductants. Thus, the merging electrochemistry with asymmetric catalysis would provide a unique and powerful approach for the synthesis of optically active compounds under oxidative or reductive conditions. Selected recent (2018–2020) examples of enantioselective electro-organic synthesis using transition metal catalysts or organocatalysts are summarized in this short review. These examples are divided to oxidative and reductive transformations and described together with brief reaction mechanisms.     

Constructing Intrapenetrated Hierarchical Zeolites with Highly Complete Framework via Protozeolite Seeding

Creation of intrapenetrated mesopores with open highway from external surface into the interior of zeolite crystals are highly desirable that can significantly improve the molecular transport and active sites accessibility of microporous zeolites to afford enhanced catalytic properties. Here, different from traditional zeolite-seeded methods that generally produced isolated mesopores in zeolites, nanosized amorphous protozeolites with embryo structure of zeolites were used as seeds for the construction of single-crystalline hierarchical ZSM-5 zeolites with intrapenetrated mesopores (mesopore volume of 0.51 cm³ g⁻¹) and highly complete framework. In this strategy, in contrast to the conventional synthesis, only a small amount of organic structure directing agents and a low crystallization temperature were adopted to promise the protozeolites as the dominant growth directing sites to induce crystallization. The protozeolite nanoseeds provided abundant nucleation sites for surrounding precursors to be crystallized, followed by oriented coalescence of crystallites resulting in the formation of intrapenetrated mesopores. The as-prepared hierarchical ZSM-5 zeolites exhibited ultra-long lifetime of 443.9 hours and a high propylene selectivity of 47.92 % at a WHSV of 2 h⁻¹ in the methanol-to-propylene reaction. This work provides a facile protozeolite-seeded strategy for the synthesis of intrapenetrated hierarchical zeolites that are highly effective for catalytic applications.     

2′,4′-BNA/LNA with 9-(2-Aminoethoxy)-1,3-diaza-2-oxophenoxazine Efficiently Forms Duplexes and Has Enhanced Enzymatic Resistance**

Artificial nucleic acids are widely used in various technologies, such as nucleic acid therapeutics and DNA nanotechnologies requiring excellent duplex-forming abilities and enhanced nuclease resistance. 2′-O,4′-C-Methylene-bridged nucleic acid/locked nucleic acid (2′,4′-BNA/LNA) with 1,3-diaza-2-oxophenoxazine (BNAP ( B^H )) was previously reported. Herein, a novel B^H analogue, 2′,4′-BNA/LNA with 9-(2-aminoethoxy)-1,3-diaza-2-oxophenoxazine (G-clamp), named BNAP-AEO ( B^AEO ), was designed. The B^AEO nucleoside was successfully synthesized and incorporated into oligodeoxynucleotides (ODNs). ODNs containing B^AEO possessed up to 10⁴-, 152-, and 11-fold higher binding affinities for complementary (c) RNA than those of ODNs containing 2′-deoxycytidine ( C ), 2′,4′-BNA/LNA with 5-methylcytosine ( L ), or 2′-deoxyribonucleoside with G-clamp ( P^AEO ), respectively. Moreover, duplexes formed by ODN bearing B^AEO with cDNA and cRNA were thermally stable, even under molecular crowding conditions induced by the addition of polyethylene glycol. Furthermore, ODN bearing B^AEO was more resistant to 3′-exonuclease than ODNs with phosphorothioate linkages.     

Transient behavior of heat removal from a cylindrical heat storage vessel packed with spherical porous particles

The transient heat transfer behavior in the case of heat removal from a cylindrical heat storage vessel packed with spherical particles was investigated experimentally for various factors (flow rate, diameter of spherical particles packed, temperature difference between flowing cold air and spherical particles accumulating heat, and physical properties of spherical particles). The experiments were covered in ranges of Reynolds number based on the mean diameter of spherical particles packed Re_d = 10.3–2200, porosity?=0.310 to 0.475, ratio of spherical particle diameter to cylinder diameterd/D = 0.0075–0.177 and ratio of length of the cylinder to cylinder diameterL/D=2.5–10. It was found that especially the flow rate and the dimension of spherical particles played an important role in estimating the transient local heat transfer characteristics near the wall of the cylindrical vessel in the present heat storage system. As flow rate and diameter of spherical particles were increased under a given diameter of the cylinder heat storage vessel, the mean heat transfer coefficient between the flow cold air and the hot spherical particles increased and the time period to finish removing heat from the vessel reduced. In addition, the useful experimental correlation equations of mean heat transfer coefficient between both phases and the time period to finish removing heat from the vessel were derived with the functional relationship of Nusselt numberNu _d=f [modified Prandtl numberPr ^* (d/D), Re_d) and Fourier numberFo = f(d/D, L/D, Pr^*, Re_d).     

Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material

This report deals with thermophysical properties and measuring methods of shape-stabilized paraffin as a new type of latent heat storage material, which keeps the same shape in a solid state when the paraffin melts. Therefore, this type paraffin can be used in a latent heat storage system without encapsulation. A transient hot wire method, a differential scanning calorimeter (DSC), a water calorimeter and a volume expansion meter, which were developed in the present study, were used to measure effective thermal conductivity, latent heat, specific heat and density of the shape-stabilized paraffin, respectively. From the obtained data, useful correlation equations of the above-mentioned thermophysical properties of the shape-stabilized paraffin were expressed as functions of physical property and mass fraction of each constituent of the shape-stabilized paraffin.