UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

Synthesis and Preliminary Anti‐bacterial Activity of Some 4‐Substituted‐N1‐2‐pyridylsulfanilamide Derivatives

2‐Amino‐4‐ethoxycarbonylpyridine 1 was used as a starting material in the synthesis of some 4‐substituted‐N¹‐2‐pyridylsulfanilamide derivatives to evaluate their antimicrobial activity. The obtained compounds were of no particular effect against the tested organisms except for a noticeable inhibition of B. subtilis, which was of varying extents but remained clearly significant.     

In situ assembled ZIF superstructures via an emulsion-free soft-templating approach

Assembling well-defined MOF superstructures remains challenging as it requires easily removable hard templates or readily available immiscible solutions for an emulsion-based soft-template approach. In this work, a single-step emulsion-free soft templating approach is reported to spontaneously prepare hollow ZIF-8 and ZIF-67 colloidosomes with no further purification. These superstructures can load different enzymes regardless of the size and charge with a high encapsulation efficiency of 99%. We envisage that this work will expand the repertoires of MOF superstructures by the judicious selection of precursors and the reaction medium.

An emulsion-free approach for the preparation of hollow ZIF-8 superstructures in a single step is established based on metal sulfate hydrates in methanol.     

Pseudoguaiane-type sesquiterpenes and inhibitors on nitric oxide production from Dichrocephala integrifolia

Three new pseudoguaiane-type sesquiterpenes, dichrocepholides A-C, and two new pseudoguaiane-type sesquiterpene dimers, dichrocepholides D and E, were isolated from the aerial part of Dichrocephala integrifolia. Their stereostructures were determined on the basis of chemical and physicochemical evidence. In addition, the extract and its principal sesquiterpene constituent, parthenin, showed an inhibitory activity on nitric oxide (NO) production and on induction of inducible NO synthase.     

Selective Solid Phase Extraction and Pre-Concentration of Heavy Metals from Seawater by Physically and Chemically Immobilized 4-Amino-3-Hydroxy-2-(2-Chlorobenzene)-Azo-1-Naphthalene Sulfonic Acid Silica Gel

4-Amino-3-hydroxy-2-(2-chlorobenzene)-azo-1-naphthalene sulfonic acid (AHCANSA) was used as a chelating modifier to improve the reactivity of the silica gel surface in terms of selective binding and extraction of heavy metal ions. The surface coverage values were found to be 0.488 and 0.473mmolg^–1 for the newly modified physically adsorbed silica gel phase (I) and chemically immobilized-AHCANSA phase (II), respectively. The modified silica gel phases (I, II) were tested for stability in different acidic buffer solutions (pH 1–6) and found to be highly resistant to hydrolysis and leaching by buffer solutions above pH 2. The application of these two phases as solid extractors for a series of mono-, di-, and tri-valent metal ions from aqueous solutions was also performed with different controlling factors such as the pH value of metal ion solutions and equilibrium shaking time. The mmolg^–1 metal capacity values determined by silica gel phases (I, II) were found to confirm high affinity and selectivity characters for binding with heavy metal ions such as Cr³⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ in a range of 0.250–0.483. The tested alkali and alkaline earth metals, Na⁺, K⁺, Mg²⁺ and Ca²⁺, were found to exhibit little interaction and binding ability with the modified silica gel phases. The selectivity characters incorporated into the modified silica gel phases were further utilized and applied in solid phase extraction and pre-concentration of trace concentration levels (1.0µgmL^–1 and 2.00–2.50ngmL^–1) from real seawater samples. The percentage recovery values determined for Cr³⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ were found to be in the range of 95.2–98.1±2.0–5.0%, and the pre-concentration recovery values for the same tested heavy metal ions were found to be in the range of 92.5–97.1±3.0–6.0% for the two newly modified silica gel phases with a pre-concentration factor of 500.Received December 20, 2002; accepted May 14, 2003 published online September 1, 2003     

Reductive depolymerization of plastics catalyzed with transition metal complexes

1. Download : Download high-res image (257KB)
2. Download : Download full-size image

     

New Layered Double Hydroxide, Zn–Ti LDH : Preparation and Intercalation Reactions

The layered double hydroxide (LDH) well known for its abilityto intercalate anionic compounds has been prepared conventionallyonly with bivalent and trivalent cations. In this study, Zn–Ti LDH consisting of bivalent and tetravalent cations was prepared, andreacted with organic monocarboxylic, dicarboxylic and aromatic acidsat high or room temperature. XRD patterns of the prepared LDH(Zn–Ti-CO₃) showed that interlayer spacing of the LDH was 0.67 nm. The value was small compared to the usual LDH (Zn–Al–CO₃)of 0.76 nm in the case of carbonate anion as the guest. Also, DTA,TG and DTG analysis indicated that the electrostatic force betweenthe layers and carbonate anions increased where the carbonate anionsin Zn–Ti LDH decomposed at 255 °C while those inZn–Al–CO₃ decomposed at 230–240 °C.     

Buprofezin dissipation and safety assessment in open field cabbage and cauliflower using GC/ITMS employing an analyte protectant

An analytical method for the determination of buprofezin residues in cabbage and cauliflower was developed and validated using gas chromatography with ion trap mass spectrometry. The analyte protectant d ‐sorbitol was used at a concentration level of 0.5 mg mL^?1 in acetonitrile instead of in matrix for constructing the calibration curves of the buprofezin standard. The average recoveries ranged from 91.3 to 96.8%, with an RSD of ≤2.7%. The limits of detection and quantitation of the method in cabbage and cauliflower were 1.3, 1.7 and 4.3, 6.2 μg kg^?1, respectively. The residual levels and dissipation kinetics of buprofezin 25% wettabe powder in cabbage and cauliflower cultivated under open field conditions was investigated at the single (T1) and double (T2) recommended rates of application. Half‐life periods were found to be 1.73 and 2.1 days in cabbage, whereas in cauliflower, these values were 1.85 and 2.36 days at T1 and T2, respectively. Based on the dissipation study, and the maximum residue limit value of 0.05 mg kg^?1, the proposed pre‐harvest interval of buprofezin in cabbage was 3–6 days and that in cauliflower was 4–10 days. The results showed that buprofezin is safe for application at both recommended application rates.