Structure–reactivity studies of chloro and isothiocyanato diorganotin (IV) complexes based on multidentate N‐donor ligands: Synthesis,spectral characterization and crystal structures

The reaction of [SnMe₂Cl₂] with the bidentate ligand 4,7‐phenanthroline (4,7‐phen) resulted in the formation of [SnMe₂Cl₂ (4,7‐phen)]_n ( 1a ) which is probably a polymeric chain in solution. On the other hand, the reaction of [SnEt₂Cl₂] with 4,7‐phen afforded the complex [Sn₂Et₄Cl₄ (κ¹‐N‐4,7‐phen)₂(μ‐κ²‐N,N‐4,7‐phen)] ( 1b ) which dissociates in dimethylsulfoxide solution. The reaction of [SnR₂Cl₂] (R = Me, Et) with 2,2′‐biquinoline (biq) yielded the complexes [SnMe₂Cl₂ (κ²‐N,N‐biq)] ( 2a ) and [SnEt₂Cl₂ (κ¹‐N‐biq)₂] ( 2b ) in the solid state. Moreover, the reaction of [SnR₂Cl₂] (R = Me, Et) with the tridentate ligand 4′‐(2‐furyl)‐2,2′:6′,2″‐terpyridine (ftpy) resulted in the formation of ionic penta‐ and hexa‐coordinated tin complexes [SnMe₂Cl (ftpy)][SnMe₂Cl₃] ( 3a ) and [SnEt₂Cl (ftpy)]Cl ( 3b ). The reaction of [SnMe₂ (NCS)₂] with ftpy afforded the hepta‐coordinated complex [SnMe₂ (NCS)₂(ftpy)] ( 4a ). The products were fully characterized using elemental analysis, and infrared, UV–visible, multinuclear (¹H, ¹³C, ¹¹⁹Sn) NMR, DEPT‐135°, HH‐COSY and HSQC NMR spectroscopies. The crystal structure of complex 3a reveals that it contains the simultaneous presence of penta‐ and hexa‐coordinated tin (IV) atoms. Notably, the crystal structure of complex 4a shows that tin (IV) is hepta‐coordinated in a pentagonal bipyramidal geometry SnC₂N₅ by three nitrogen atoms of ftpy, two nitrogen atoms of NCS^? and two Me groups with trans‐[SnMe₂] configuration. These data indicate the influence of halide or pseudo‐halide group on the coordination number and geometry of tin. Hirshfeld surface analysis and two‐dimensional fingerprint plots were calculated for 3a and 4a which show the π–π interaction between molecules in the solid is relatively weak.     

Comparative study of kinetic modeling for the oxidative coupling of methane by genetic and marquardt algorithms

Overall kinetic studies on the oxidative coupling of methane, OCM, have been conducted in a tubular fixed bed reactor, using perovskite titanate as the reaction catalyst. The appropriate operating conditions were found to be: temperature 750-775 ℃, total feed flow rate of 160 ml/min, CH4/O2 ratio of 2 and GHSV of 100 min-1. Under these conditions, C2 yield of 28% was achieved. Correlations of the kinetic data have been performed with lumped rate equations for C2 and COx formation as functions of temperature, O2 and CH4 partial pressures. Six models have been selected among the common lumped kinetic models. The selected models have been regressed with the experimental data which were obtained from the Catatest system by genetic algorithm in order to obtain optimized parameters. The kinetic coefficients in the overall reactions were optimized by different numerical optimization methods such as: the Levenberg-Marquardt and genetic algorithms and the results were compared with one another. It has been found that the Santamaria model is in good agreement with the experimental data. The Arrhenius parameters of this model have been obtained by linear regression. It should be noted that the Marquardt algorithm is sensitive to the first guesses and there is possibility to trap in the relative minimum.     

Investigation of a mutual interaction force at different pressure amplitudes in sulfuric acid

This paper investigates the secondary Bjerknes force for two oscillating bubbles in various pressure amplitudes in a concentration of 95% sulfuric acid.The equilibrium radii of the bubbles are assumed to be smaller than 10 μm at a frequency of 37 kHz in various strong driving acoustical fields around 2.0 bars (1 bar=10 5 Pa).The secondary Bjerknes force is investigated in uncoupled and coupled states between the bubbles,with regard to the quasi-adiabatic model for the bubble interior.It finds that the value of the secondary Bjerknes force depends on the driven pressure of sulfuric acid and its amount would be increased by liquid pressure amplitude enhancement.The results show that the repulsion area of the interaction force would be increased by increasing the driven pressure because of nonlinear oscillation of bubbles.     

Metal‐Doped Nitrogenated Carbon as an Efficient Catalyst for Direct CO2 Electroreduction to CO and Hydrocarbons

This study explores the kinetics, mechanism, and active sites of the CO₂ electroreduction reaction (CO2RR) to syngas and hydrocarbons on a class of functionalized solid carbon‐based catalysts. Commercial carbon blacks were functionalized with nitrogen and Fe and/or Mn ions using pyrolysis and acid leaching. The resulting solid powder catalysts were found to be active and highly CO selective electrocatalysts in the electroreduction of CO₂ to CO/H₂ mixtures outperforming a low‐area polycrystalline gold benchmark. Unspecific with respect to the nature of the metal, CO production is believed to occur on nitrogen functionalities in competition with hydrogen evolution. Evidence is provided that sufficiently strong interaction between CO and the metal enables the protonation of CO and the formation of hydrocarbons. Our results highlight a promising new class of low‐cost, abundant electrocatalysts for synthetic fuel production from CO₂.     

Delayed feedback control of time-delayed chaotic systems: Analytical approach at Hopf bifurcation

This Letter is concerned with bifurcation and chaos control in scalar delayed differential equations with delay parameter τ. By linear stability analysis, the conditions under which a sequence of Hopf bifurcation occurs at the equilibrium points are obtained. The delayed feedback controller is used to stabilize unstable periodic orbits. To find the controller delay, it is chosen such that the Hopf bifurcation remains unchanged. Also, the controller feedback gain is determined such that the corresponding unstable periodic orbit becomes stable. Numerical simulations are used to verify the analytical results.     

Monitoring real-time curing of epoxies in situ using single-sided NMR

Adhesively bonded joints using epoxy are widely used in aircraft and aerospace structures. Quality control and defect detection during epoxy curing in such applications is critical. We used single-sided nuclear magnetic resonance (NMR) to nondestructively probe and spatially resolve the change in the characteristic NMR relaxation time (T₂) of epoxies during curing on a substrate. Time-dependent T₂ values were fit to a Weibull function to model temporal changes in the NMR measurables. Our results demonstrate that the reduction in molecular mobility of various epoxy/curing agent mixtures occurs more rapidly at the interface than in the bulk. Further use of single-sided NMR to acquire spatially resolved T₂ data will provide a route for elucidatory epoxy curing studies. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 616–623     

Reactions of platinum complexes with 4,7-phenanthroline: crystal structures of mono- and binuclear platinum(II) complexes containing 4,7-phenanthroline

The reaction of a mixture of cis and trans-[PtCl₂(SMe₂)₂] with 4,7-phen (4,7-phen = 4,7-phenanthroline) in a molar ratio of 1 : 1 or 2 : 1 resulted in the formation of mono and binuclear complexes trans-[PtCl₂(SMe₂)(4,7-phen)] (1) and trans-[Pt₂Cl₄(SMe₂)₂(μ-4,7-phen)] (2), respectively. The products have been fully characterized by elemental analysis, ¹H, ¹³C{¹H}, HHCOSY, HSQC, HMBC, and DEPT-135 NMR spectroscopy. The crystal structure of 1 reveals that platinum has a slightly distorted square planar geometry. Both chlorides are trans with a deviation from linearity 177.66(3)°, while the N–Pt–S angle is 175.53(6)°. Similarly, the reaction of a mixture of cis and trans-[PtBr₂(SMe₂)₂] with 4,7-phen in a 1 : 1 or 2 : 1 mole ratio afforded the mono or binuclear complexes trans-[PtBr₂(SMe₂)(4,7-phen)] (3) and trans-[Pt₂Br₄(SMe₂)₂(μ-4,7-phen)] (4), respectively. The crystal structure of trans-[Pt₂Br₄(SMe₂)₂(μ-4,7-phen)].C₆H₆ reveals that 4,7-phen bridges between two platinum centers in a slightly distorted square planar arrangement of the platinum. In this structure, both bromides are trans, while the PtBr₂(SMe₂) moieties are syn to each other. NMR data of mono and binuclear complexes of platinum 1–4 show that the binuclear complexes exist in solution as a minor product, while the mononuclear complexes are major products.     

Even factor of bridgeless graphs containing two specified edges

An even factor of a graph is a spanning subgraph in which each vertex has a positive even degree. Let G be a bridgeless simple graph with minimum degree at least 3. Jackson and Yoshimoto (2007) showed that G has an even factor containing two arbitrary prescribed edges. They also proved that G has an even factor in which each component has order at least four. Moreover, Xiong, Lu and Han (2009) showed that for each pair of edges e₁ and e₂ of G, there is an even factor containing e₁ and e₂ in which each component containing neither e₁ nor e₂ has order at least four. In this paper we improve this result and prove that G has an even factor containing e₁ and e₂ such that each component has order at least four.     

Oxidation of ethylbenzene to styrene oxide in the presence of cellulose‐supported Pd magnetic nanoparticles

Palladium and Fe₃O₄ nanoparticles were deposited on N‐(2‐aminoethyl)acetamide‐functionalized cellulose for use in a catalytic reaction. The catalyst was characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, X‐ray diffraction, energy‐dispersive X‐ray analysis and transmission electron microscopy, and applied in the oxidation reaction of ethylbenzene at 100 °C using H₂O₂. Styrene oxide was obtained as the sole product of the oxidation reaction during 24 h. This reaction has some advantages such as one‐pot transformation of ethylbenzene to styrene oxide, high yield, excellent selectivity and magnetically recoverable catalyst. Also, the recovered catalyst could be used in the oxidation reaction four times without decrease in yield. Copyright © 2016 John Wiley & Sons, Ltd.