Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electricity Production and Characterization of High-Strength Industrial Wastewaters in Microbial Fuel Cell

Microbial fuel cells (MFCs) convert electrochemical energy into electrical energy immediately and have a big potential usage for the same time wastewater treatment and energy recovery via electro-active microorganisms. However, MFCs must be efficiently optimized due to its limitations such as high cost and low power production. Finding new materials to increase the cell performance and reduce cost for MFC anodes is mandatory. In the first step of this study, different inoculation sludges such as anaerobic gum industry wastewater, anaerobic brewery wastewater and anaerobic phosphate were tested, and MFC that was set up with anaerobic gum industry wastewater inoculation sludge exhibited the highest performance. In the second step of this study, various wastewaters such as chocolate industry, gum industry and slaughterhouse industry were investigated for anode bacteria sources. Several electrochemical techniques have been employed to elucidate how wastewaters affect the MFCs’ performance. Among all the mentioned wastewaters, the best performance was achieved by the MFCs fed with slaughterhouse wastewater; this device produced a maximum power density of 267 mW·m^?2.     

A mixed integer programming model for multistage mean–variance post-tax optimization

In this paper, we introduce a mixed integer stochastic programming approach to mean–variance post-tax portfolio management. This approach takes into account of risk in a multistage setting and allows general withdrawals from original capital. The uncertainty on asset returns is specified as a scenario tree. The risk across scenarios is addressed using the probabilistic approach of classical stochastic programming. The tax rules are used with stochastic linear and mixed integer quadratic programming models to compute an overall tax and return-risk efficient multistage portfolio. The incorporation of the risk term in the model provides robustness and leads to diversification over wrappers and assets within each wrapper. General withdrawals and risk aversion have an impact on the distribution of assets among wrappers. Computational results are presented using a study with different scenario trees in order to show the performance of these models.     

Reference intervals of serum folate and vitamin B12 developed from data of healthy subjects

 In this study the reference intervals for folate and vitamin B₁₂ were estimated according to the National Committee for Clinical Laboratory Standards Approved Guideline C28-A and International Federation of Clinical Chemistry recommendations. The study included 155 women and 124 men between ages 18–40. The health status was confirmed by history, physical examination and a questionnaire. The central 95% reference intervals of serum folate and vitamin B12 for women, determined non-parametrically, were found to be 3.9–18.1 ng/ml and 101–666.7 pg/ml, respectively. The reference values of serum folate and vitamin B12 for men were also found to be 2,5–17.6 ng/ml and 100–699.57 pg/ml, respectively. We did not observe subclass differences between females and males. Received: 15 April 2000 · Accepted: 15 April 2000     

A Method for Determining the Dielectric Constant of Microwave PCB Substrates

This paper presents a simple method for determining the dielectric constant of microwave PCB substrates. In the presented method, a bandpass microstrip filter designed on the PCB substrate with a user-predicted dielectric constant value is implemented for a given center frequency. The simulation results of the designed bandpass filter are obtained by the help of microwave design software; XFDTD?. Experimental results regarding the filter frequency characteristic are accomplished by means of a vector network analyzer. The simulation results of the designed filter are modified to overlap with the experimental ones by varying the dielectric constant value. When the simulation and experimental results are overlapped, the value of dielectric constant is accurately selected. In order to illustrate the validity of proposed method, the dielectric constant values of flame resistant-4 (FR4) substrates are acquired at IEEE 802.11b/g and IEEE 802.11a wireless local area network (WLAN) application frequencies. The results obtained by using the presented method agree with the previous studies in the literature.     

Indium phosphide nanofibers prepared by electrospinning method: Synthesis and characterization

Nine sets of (3 × 3) InP nanofiber samples have been successfully prepared at three different voltages (20, 25, 30 kV) and at three separate heights (5, 7, 10 cm) by electrospinning with a constant precursor flow rate of 0.3 mLh⁻¹. The crystalline structure, thermal, morphologies and nanostructure, electrical, and optical properties of the samples are characterized by X‐ray powder diffractometer (XRD) and thermal gravity‐differential scanning calorimeter (TG‐DSC), scanning electron microscopy (SEM), by Four‐Point Probe Technique (FPPT,) and ultraviolet/visible spectrometry (UV/VIS), respectively. From these measurements, we have found the formation of stoichiometric nanostructured InP with zinc‐blende structure and having lattice parameter of a = 5.874 Å, weight loss of 64.59% and crystallization temperature of 500°C, average fiber diameter of 65.82 nm, the activation energies, E_a, of the samples, and band gap energy, E_g, of the nanofibers developed at constant applied voltage 30 kV. The band gap energies determined at different distances 5, 7, and 10 cm are found to be as 1.29, 1.37, and 1.30 eV, respectively.     

A Six-Vertex Theorem for Bounding Normal Planar Curves

We prove that the number of vertices of a smooth normal planarcurve is at least 6, if it bounds a surface other than the disk.     

Effect of electrolytes on the surface behavior of rhamnolipids R1 and R2

The surface behavior of solutions of the rhamnolipids, R1 and R2, were investigated in the absence and presence of an electrolyte (NaCl) through surface tension measurements and optical microscopy at pH 6.8. The NaCl concentrations studied are 0.05, 0.5 and 1 M. Electrolytes directly affect the carboxylate groups of the rhamnolipids. The solution/air interface has a net negative charge due to the dissociated carboxylate ions at pH 6.8 with strong repulsive electrostatic forces between the rhamnolipid molecules. This negative charge is shielded by the Na⁺ ions in the electrical double layer in the presence of NaCl, causing the formation of a close-packed monolayer, and a decrease in CMC, and surface tension values. The maximum compaction is observed at 0.5 M NaCl concentrations for R1 and R2 monolayers, with the R1 monolayer more compact than R2. The larger spaces left below the hydrophobic tails of R1 with respect to that of R2, due to the missing second rhamnosyl groups are thought to be responsible for the higher compaction. The rigidity of both R1 and R2 monolayers increases with the electrolyte concentration. The rigidity of the R1 monolayer is greater than that of R2 at all NaCl concentrations due to the lower hydrophilic character of R1. The variation of CMC values as a function of NaCl concentration obtained from the surface tension measurements and critical packing parameter (CPP) calculations show that spherical micelles, bilayer and rod like micelles are formed in the rhamnolipid solutions as a function of the NaCl concentration. The results of optical microscopy supported these aggregation states indicating lamellar nematic liquid crystal, cubic lamellar and hexagonal liquid crystal phases in R1 and R2 solutions depending on the NaCl concentration.     

Synthesis of 5,6-O-Cyclohexylidene-1-amino-3-azahexane and Its Co(II), Ni(II), Cu(II) Complexes

5,6-O-Cyclohexylidene-1-amino-3-azahexane (L) is synthesized from 1-chloro-2,3-O-cyclohexylidenepropane, which is prepared by the reaction between epichlorohydrin and cyclohexanone. In this reaction, BF₃ · OEt₂ is used as a catalyst. Complexes of Co(II), Ni(II) and Cu(II) acetates with this ligand are prepared. The structures of the ligand and its complexes are proposed based on elemental analysis, IR and UV-VIS spectroscopy, magnetic susceptibility, conductometry, and ¹H and ¹³C NMR spectroscopy.