Electrochemical Monitoring of Methotrexate Anticancer Drug in Human Blood Serum by Using in situ Solvothermal Synthesized Fe3O4/ITO Electrode

Here, we reported on a one‐step fabrication of magnetite Fe₃O₄ nanoparticles/indium tin oxide (ITO) electrode based on the direct growing of Fe₃O₄ nanoparticles on the ITO surface by using a solvothermal process. The modified electrode was used as electrochemical methotrexate (MTX) biosensor with high sensitivity based on cyclic voltammetry and square wave voltammetry techniques. The results demonstrated a linear relationship between the MTX concentration and its oxidation current peak over a wide range from 10^?5 to 10^?14 mole/L with a limit of detection of 0.4×10^?15 M based on the square wave voltammetry (SWV) technique. In addition, Fe₃O₄/ITO electrode showed a good capability for measuring very low concentrations of MTX drug dissolved in human serum solution. Also, Fe₃O₄/ITO electrode was used for detecting MTX in blood serum samples collected from patients after their treatment with MTX. The prepared electrode showed the higher sensitivity that higher than the Viva‐E instrument, which opens the door for developing a cheap, simple and higher sensitive MTX sensor.     

Synthesis of Anthracene Derivatives with Azaacene-Containing Iptycene Wings and the Utilization as a Dopant for Solution-Processed Organic Light-Emitting Diodes

Substituted acene derivatives are regarded as promising materials for organic electronic devices such as organic light-emitting diodes (OLEDs). In particular, anthracene derivatives are known to exhibit good fluorescence property, with the air stability and solubility in common organic solvents expected to give advantages for solution-processed device fabrication. In this study, a series of bistriisopropylsilyl(TIPS)ethynyl anthracene derivatives with azaacene-containing iptycene wings have been synthesized by using condensation reactions. Effects of size of azaacenes on optical properties and packing structures were investigated. UV/Vis absorption and fluorescence spectra indicate that the π-elongation of iptycene units has small effects on the overall π-system, which is also supported by electrochemical measurements. Secondly, single-crystal X-ray analysis implies that the molecules likely have interactions with the iptycene units of adjacent molecules, while the iptycene wings and TIPSethynyl groups can prevent the central anthracene unit from undesirable non-radiative energy loss. Finally, the most emissive derivative was used as a dopant for solution-processed OLEDs, showing obvious electroluminescence with a luminance of over 920 cd m⁻².     

An efficient,mild and selective Ullmann‐type N‐arylation of indoles catalysed by Pd immobilized on amidoxime‐functionalized mesoporous SBA‐15 as heterogeneous and recyclable nanocatalyst

A wide range of N‐arylated indoles were selectively synthesized through intermolecular C(aryl)? N bond formation from the corresponding aryl iodides and indoles through Ullmann‐type coupling reactions in the presence of a catalytic amount of Pd immobilized on amidoxime‐functionalized mesoporous SBA‐15 (SBA‐15/AO/Pd(0)) under mild reaction conditions. These cross‐coupled products were obtained in excellent yields under mild conditions at extremely low palladium loading (ca 0.3 mol%), and the heterogeneous catalyst can be readily recovered by simple filtration and reused seven times with loss in its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Aromaticity Relocation in Perylene Derivatives upon Two‐Electron Oxidation To Form Anthracene and Phenanthrene

We prepared perylene dications 1 ²⁺ and 2 ²⁺ by using “capped” perylene derivatives, and for the first time, successfully obtained single crystals of a perylene dication 1 ²⁺ that enabled us to perform its structural analysis. We realized that the substituted aryl groups on perylene control the positions of positive charges, thus the remaining electronic system satisfies Clar's sextet rule toward the highest number of localized sextets. Experimental and theoretical evidence proved that Clar's aromatic π‐sextet rule could be applied even for the dicationic perylenes in a very simple way.     

ZnO/Fe3O4 nanoparticles promoted green synthesis of pyrazolo pyrimidinones: Study of antioxidant activity

The preparation of pyrazolo pyrimidinone derivatives was performed by using five component reactions of phthalaldehyde, cyanomethylamine, electron deficient acetylenic compounds, isocyanate, hydrazine, and catalytic amounts of ZnO/Fe₃O₄-magnetic nanoparticles as a high performance catalyst under ultrasonic conditions at ambient temperature in aquause media at room temperature. It should be mentioned that this catalyst was prepared using Spinacia oleracea water extract. In addition, for investigation of antioxidant ability, radical trapping by DPPH and reducing power of ferric ion experiments was performed. As a result, synthesized compounds show excellent radical trapping by DPPH and good reducing ability of ferric ion. The current procedure has the benefits for instance excellent yield of reaction, green media, and easy separation of product and catalyst.     

Visible-Light-Induced Heptacene Generation under Ambient Conditions: Utilization of Single-crystal Interior as an Isolated Reaction Site

The photo-induced generation of unstable molecules generally requires stringent conditions to prevent oxidation and the concomitant decomposition of the products. The visible-light-induced conversion of two heptacene precursors to heptacene was studied. Single crystals of bis- and mono-α-diketone-type heptacene precursors ( 7-DK2 and 7-DK1 , respectively), were prepared to investigate the effect of precursor structure on reactivity. The photoirradiation of a 7-DK2 single crystal cleaved only one α-diketone group, forming an intermediate bearing a pentacene subunit, while that of a 7-DK1 single crystal gave rise to characteristic absorption peaks of heptacene and their increase in intensity with photoirradiation time, indicating the generation of heptacene without decomposition. Heptacene production was not observed when the precursors were photoirradiated in solution, implying that the single crystal interior provided isolation from the external environment, thus preventing heptacene oxidation.     

Enhanced Four-Electron Oxygen Reduction Selectivity of Clamp-Shaped Cobalt(II) Porphyrin(2.1.2.1) Complexes

The molecular structure, electrochemistry, spectroelectrochemistry and electrocatalytic oxygen reduction reaction (ORR) features of two Co^II porphyrin(2.1.2.1) complexes bearing Ph or F₅Ph groups at the two meso-positions of the macrocycle are examined. Single crystal X-ray analysis reveal a highly bent, nonplanar macrocyclic conformation of the complex resulting in clamp-shaped molecular structures. Cyclic voltammetry paired with UV/Vis spectroelectrochemistry in PhCN/0.1 M TBAP suggest that the first electron addition corresponds to a macrocyclic-centered reduction while spectral changes observed during the first oxidation are consistent with a metal-centered Co^II/Co^III process. The activity of the clamp-shaped complexes towards heterogeneous ORR in 0.1 M KOH show selectivity towards the 4e⁻ ORR pathway giving H₂O. DFT first-principle calculations on the porphyrin catalyst indicates a lower overpotential for 4e⁻ ORR as compared to the 2e⁻ pathway, consistent with experimental data.     

Green micellar stability-indicating high-performance liquid chromatography method for determination of rupatadine fumarate in the presence of its main impurity desloratadine: Oxidative degradation kinetics study

A green micellar stability-indicating high-performance liquid chromatography method was developed for rupatadine fumarate determination in existence with its main impurity desloratadine. Separation was attained using Hypersil ODS column (150 × 4.6 mm, 5 μm), the micellar mobile phase consisted of 0.13 M sodium dodecyl sulfate, 0.1 M disodium hydrogen phosphate adjusted by phosphoric acid to pH 2.8 and 10% n-butanol. The column was maintained at 45^◦C and detection was carried out at 267 nm. A linear response was achieved over the range of 2–160 μg/ml for rupatadine and 0.4–8 μg/ml for desloratadine. The method was applied for rupatadine determination in alergoliber tablets and alergoliber syrup without the interference of methyl paraben and propyl paraben present as main excipients. Rupatadine fumarate revealed pronounced susceptibility to oxidation; further study of oxidative degradation kinetics was carried out. Rupatadine was found to follow pseudo-first-order kinetics when exposed to 10% H₂O₂ at 60 and 80°C and the activation energy was found to be 15.69 Kcal/mol. At a lower temperature (40°C), degradation kinetics regression was best fitted as a polynomial quadratic relationship, thus rupatadine oxidation at a lower temperature tends to adopt a second-order kinetics rate. Oxidative degradation product structure was revealed using infrared and found to be rupatadine N-oxide at all temperature values.     

Deep eutectic solvent-based modified quick,easy, cheap,effective, rugged,and safe extraction combined with solidification of floating organic droplet-dispersive liquid–liquid microextraction of some pesticides from canola oil followed by gas chromatography analysis

Herein, a modified quick, easy, cheap, effective, rugged, and safe extraction was developed based on deep eutectic solvent for the extraction of several pesticides from canola oil samples. In this work, first, different sorbents were selected to remove the sample interferences, and the composition of the sorbents was optimized by simplex centroid design. The extracted analytes were more concentrated by solidification of floating deep eutectic solvent droplet-dispersive liquid–liquid microextraction. Low limits of detection (0.15–0.23 ng/g) and quantification (0.49–0.76 ng/g), high extraction recoveries (74–87%) and enrichment factors (224–263), and good repeatability (relative standard deviation equal to or less than 5.1 and 4.7% for intra- and interday precisions, respectively) were achieved using the proposed method. The suggested approach was used for the quantification of the analytes in different canola oil samples. Additionally, the effects of microwave irradiations exposure and sonication in decontamination of the samples were evaluated. In this method, there was no need for centrifugation and toxic solvents. Also, effective extraction of the analytes and minimizing interferences were achieved through the use of various sorbents.