Determination of percolation threshold electroactivity and phase behavior study on conducting blends of thermotropic polyesters and polyaniline

The new thermotropic polyester/polyaniline (PIn/PAni) blends have been prepared by solution blend of synthesized liquid crystalline poly[4,4′‐bis (ω‐alkoxy) biphenylisophthalate]s having four and six methylene units in spacer (PI4 and PI6) with PAni doped with camphorsolfonic acid (CSA). The percolation threshold electroactivity of prepared blend films has been determined by cyclic voltammetry. The effect of the PAni concentration, solvent nature and polyester structure on the electroactivity of the blends has been investigated. The extremely low percolation threshold of prepared PIn/PAni‐CSA blends from dimethylformamide (DMF) and m‐cresol solution was 3% weight of PAni‐CSA. The amount of conducting polymer necessary to retard the formation of the liquid crystalline (LC) phase is up to 45% by weight. Phase behavior studies by differential scanning calorimetry and polarizing microscopy show that blends with 45% of conducting polymer are both liquid crystal and conductive. The morphology of the blends has been investigated by scanning electron microscopy. Copyright © 2004 John Wiley & Sons, Ltd.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Influence of imide functionalized organo‐modified Mg‐Al layered double hydroxide on the thermal and mechanical properties of new aliphatic‐aromatic poly (amide‐imide)

A new dicarboxylic acid modified Mg‐Al LDH (DLDH) containing imide groups was prepared and its effects on the thermal and mechanical properties of the new synthesized aliphatic‐aromatic poly (amide‐imide) (PAI) were investigated via preparation of PAI/nanocomposite films by solution casting method. The results of X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) showed a uniform dispersion for LDH layers into the PAI matrix. For comparison, the effects of polyacrylic acid‐co‐poly‐2‐acrylamido‐ 2‐methylpropanesulfonic acid (PAMPS‐co‐PAA) modified Mg‐Al LDH (ALDH) on the PAI properties were also studied. The thermogravimetric analysis (TGA) results exhibited that the temperature at 5 mass% loss (T₅) increased from 277 °C to 310 °C for nanocomposite containing 2 mass% of DLDH, while T₅ for nanocomposite containing 2 mass% of ALDH increased to 320 °C, along with the more enhancement of char residue compared to the neat PAI. According to the tensile test results, with 5 mass% DLDH loading in the PAI matrix, the tensile strength increased from 51.6 to 70.8 MPa along with an increase in Young's modulus. Also the Young's modulus of PAI nanocomposite containing 5 mass% ALDH reduced from 1.95 to 0.81 GPa.     

Evaluation of 99mTc-ceftazidime as bacterial infection imaging agent

Although our understanding of microorganisms has advanced significantly and antimicrobial therapy has become increasingly available, infection remains a major cause of patient morbidity and mortality. The use of radiopharmaceuticals for diagnosis of infection is increasing due to their ability to distinguish between septic and aseptic inflammation. A wide range of radiopharmaceuticals have been proposed to visualize infection and inflammation scintigraphically. Ceftazidime a cephalosporin antibiotic used to treat bacterial infections was investigated to label with ^99mTc. Labeling was performed using sodium dithionite as reducing agent at 100 °C for 10 min and radiochemical analysis involved ITLC and HPLC methods. The stability of labeled antibiotic was checked in the presence of human serum at 37 °C up to 24 h. The maximum radiolabeling yield was 95.4 ± 2.0 % corresponding to a specific activity of 178 GBq/mmol. Bacterial binding assay was performed with S. aureus and the in vivo distribution was studied in mice. Images showed minimal accumulation in nontarget tissues, with an average target/nontarget ratio of % 1.4 ± 0.2.     

Radio labeling,quality control and biodistribution of <Superscript>99m</Superscript>Tc-cefotaxime as an infection imaging agent

Cefotaxime, a cephalosporin antibiotic, used to treat bacterial infections was investigated to label with ^99mTc. Labeling was performed using sodium dithionite as a reducing agent at 100 °C for 10 min and radiochemical analysis involved ITLC and HPLC methods. The stability of labeled antibiotic was checked in the presence of human serum at 37 °C up to 24 h. The maximum radiolabeling yield was 92 ± 2%. Bacterial binding assay was performed with S. aureus and the in vivo distribution was studied in mice. Images showed minimal accumulation in non-target tissues, with an average target/non-target ratio of 2.89 ± 0.58.     

Thermotropic polyesters. 1: Synthesis, characterization and thermal transition of poly[4,4-bis(ω-alkoxy)biphenyl isophthalate]

A new homologous series of thermotropic polyesters has been synthesized by polycondensation reaction between isophthaloyl chloride and mesogenic diols 4,4^′-bis(ω-hydroxyalkoxy)biphenyl in which the spacer length is varied from 3 to 6 methylene units. The thermal behavior of the polymers has been characterized using polarized light microscopy and differential scanning calorimetry (DSC). The odd members exhibit a smectic C (S_C) phase in a narrow temperature interval, while the even members form a smectic A (S_A) phase in a broader temperature range. All of the obtained compounds were characterized by conventional spectroscopic methods.