Synthesis and characterization of VO–vanillin complex immobilized on MCM-41 and its facile catalytic application in the sulfoxidation reaction,and synthesis of 2,3-dihydroquinazolin-4(1H)-ones and disulfides in green media

In this work, a vanillin complex is immobilized onto MCM-41 and characterized by FT-IR, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and BET techniques. This supported Schiff base complex was found to be an efficient and recoverable catalyst for the chemoselective oxidation of sulfides into sulfoxides and thiols into their corresponding disulfides (using hydrogen peroxide as a green oxidant) and also a suitable catalyst for the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives in water at 90°C. Using this protocol, we show that a variety of disulfides, sulfoxides, and 2,3-dihydroquinazolin-4(1H)-one derivatives can be synthesized in green conditions. The catalyst can be recovered and recycled for further reactions without appreciable loss of catalytic performance.     

Black-body radiation of noncommutative gauge fields

The black-body radiation is considered in a theory with noncommutative electromagnetic fields; that is noncommutativity is introduced in field space, rather than in real space. A direct implication of the result on cosmic microwave background map is argued.     

Palladium catalyzed mild reduction of α,β-unsaturated compounds by triethylsilane

The palladium(II) chloride/triethylsilane system has been successfully applied for the selective hydrogenation of the carbon-carbon double bond of α,β-unsaturated ketones to yield the corresponding saturated carbonyl compounds. The reaction takes place under mild conditions and affords high yields.     

Fabrication and Determination of Refractive Index Profile of the Planar Waveguides by Wedge Technique

Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractiveindex profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer andapplying fringe analysis methods.     

Oxidation of Aromatic Amines to Quinones by Iodic Acid under Microwave Irradiation in the Presence of Montmorillonite K10 and Silica Gel

A variety of aromatic amines are oxidized to their corresponding quinones in excellent yields by supported iodic acid under microwave irradiation and solvent free conditions.     

1H NMR Study of Hindered Internal Rotation of Tetramethylthiuram Disulfide in Binary Dimethyl Sulfoxide‐Chloroform Mixtures

Hindered internal rotation about the C‐N single bonds joining the thiuram disulfide was studied by ¹H NMR complete line‐shaped analysis in different dimethyl sulfoxide‐chloroform (DMSO‐CDCl₃) mixtures. From the temperature dependence of methyls proton spectra, activation parameters (E_a, ΔH^≠, ΔS^≠, and ΔG^≠) were obtained. The Arrhenius plots showed a distinct isokinetic temperature at about 35 °C at which the exchange rate is more or less independent of the solvent composition. The resulting ΔH^≠ against TΔS^≠ plot showed a firmly good linear correlation, indicating the existence of an enthalpy‐entropy composition in an exchange process.     

Asphaltene self-association and water-in-hydrocarbon emulsions

The configuration of asphaltenes on the water-oil interface was evaluated from a combination of molar mass, interfacial tension, drop size distribution, and gravimetric measurements of model emulsions consisting of asphaltenes, toluene, heptane, and water. Molar mass measurements were required because asphaltenes self-associate and the level of self-association varies with asphaltene concentration, the resin content, solvent type, and temperature. Plots of interfacial tension versus the log of asphaltene molar concentration were employed to determine the average interfacial area of asphaltene molecules on the interface. The moles of asphaltenes per area of emulsion interface were determined from the molar mass data as well as drop size distributions and gravimetric measurements of the model emulsions. The results indicate that asphaltenes form monolayers on the interface even at concentrations as high as 40 kg/m(3). As well, large aggregates with molar masses exceeding approximately 10,000 g/mol did not appear to adsorb at the interface. The area occupied by the asphaltenes on the interface was constant indicating that self-associated asphaltenes simply extend further into the continuous phase than nonassociated asphaltenes. The thickness of the monolayer ranged from 2 to 9 nm.     

E-Beam—a new transfer system for isolator technology

In every aseptic filling application, the sterile transfer of goods into the aseptic area is a challenge, and there are many different ways to do it.

With isolator technology a higher sterility assurance level (SAL) is achieved. This SAL is only as good as the weakest segment in the chain of manufacturing. The transfer of goods into and out of the isolator is one of these critical segments.

Today different techniques, some already well established, others still very new, are available on the market like: dry heat tunnel, autoclave, pulsed light, rapid transfer systems (RTP), H₂O₂ tunnel, UV light, etc. all these systems are either not applicable for continuous transfer, only good for heat-compatible materials like glass, or do not guarantee a 6 log spore reduction.

E-Beam opens new perspectives in this field. With E-beam technology it is possible to transfer heat-sensitive (plastic), pre-sterilised materials at high speed, continuously into an aseptic area.

E-Beam unifies three different technologies, that result in a very efficient and high-speed decontamination machine designed for the pharmaceutical industry. First, there is the electron beam that decontaminates the goods and an accurate shielding that protects the surrounding from this beam. Second, there is the conveyor system that guarantees the output and the correct exposure time underneath the beam. And third, there is the isolator interface to provide correct differential pressure and clean air inside the tunnel as well as the decontamination of the tunnel with H₂O₂ prior to production.

The E-beam is a low-energy electron beam, capable of decontaminating any kind of surface. It penetrates only a few micrometers into the material and therefore does not deform the packaging media.

Currently, machines are being built to transfer pre-sterilised syringes, packed in plastic tubs with a Tyvek cover into an aseptic filling isolator with the following data: decontamination efficiency of 10⁶ (6 log spore reduction), decontamination speed of 6 tubs (600 syringes) per minute.

This is just one of many applications for this new technology.     

Tribromoisocyanuric Acid (TBCA) and Oxone®‐MX Systems as Oxidizing Agents: Oxidative Coupling of Thiols to Their Corresponding Disulfides under Mild and Heterogeneous Conditions

Tribromoisocyanuric acid (TBCA) and Oxone^®‐MX systems were used as effective oxidizing agents for the oxidation of thiols to their corresponding disulfides under mild conditions at room temperature with good to excellent yields.     

Synthesis and Dynamic NMR Study of Functionalized 1-(3-Furyl)-1H-indole-2,3-diones

Protonation of the highly reactive 1:1 intermediates produced in the reaction between alkyl(aryl) isocyanides and dibenzoylacetylene by isatin, leads to vinylnitrilium cations, which undergo carbon-centered Michael-type addition with the conjugate base of the NH-acid to produce highly functionalized 1-(3-furyl)-1H-indole-2,3-diones. A dynamic NMR effect is observed in the ¹H NMR spectra of these compounds as a result of restricted rotation around the single bond linking the indole moiety and the furan system. The free-energy of activation (ΔG ^#) for this process is 69–71 ± 2 kJ mol⁻¹.