New pyranosyl cembranoid diterpenes from Sarcophyton trocheliophorum

During our continual searching programme for novel bioactive metabolites from Sarcophyton trocheliophorum, collected from Red Sea, we describe herein the isolation and structural elucidation of further two new pyrane-based cembranoid diterpenes: 9-hydroxy-7,8-dehydro-sarcotrocheliol (1) and 8,9-expoy-sarcotrocheliol acetate (2), along with the well-known sarcotrocheliol acetate (3), (+)-sarcophine (4), (+)-sarcophytoxide (5) and (-)-sarcophytoxide (6). The chemical structures of compounds 1 and 2 were determined on the basis of 1D and 2D NMR (¹H, ¹³C, ¹H–¹H COSY, HMQC, HMBC and NOE), mass spectra (ESI and HR-ESIMS) and by comparison with related structures. The antimicrobial activities of the reported compounds 1–6 were investigated. According to the molecular docking study of compounds 1–6 using 3D structure of α,β tubulin in complex with taxol (PDB code 1JFF) and epothilone A (PDB code 1TVK), sarcophine (4) displayed the highest affinity towards both crystal structures, followed by 5 and 6, meanwhile pyrane-based cembranoid diterpenes (1–3) showed less affinity.     

Reactions of tertiary propargyl alcohols with sodium halides under oxidative conditions

The study of the reactions of tertiary propargyl alcohols with sodium halides under oxidative conditions is presented. With sodium iodide, α-iodoenones were formed, however, with sodium bromide or chloride the α-haloenones were only formed in low yields under anhydrous conditions. Conversely, upon addition of water to the reaction mixtures, α,α-dibromoketones and α,α-dichloroketones were formed in good yields, but α,α-diiodoketones were not observed.     

Comparative study between two fabricated potentiometric sensors to enhance selectivity towards ferrous ions

Electroanalytical methods are highly selective for measuring electrical quantities including the charge, potential and current with their relation to chemical parameters. They are widely applied in various fields such as biochemical analysis, industrial quality control and environmental monitoring. They have many advantages over other techniques in that they are not time consuming and are specific for certain oxidation states of certain elements which give these techniques high selectivity and sensitivity features. This paper is based on two parts: the first part describes the fabrication of screen‐printed electrodes (SPEs) modified with methyl red as electroactive material, while second part describes the preparation and characterization of Fe(II)–methyl red complex using various spectroscopic tools, the complex being used for the construction of carbon paste electrodes (CPEs). The two proposed electrodes were successfully applied for the determination of Fe(II) in water and pharmaceutical (pharovit) samples. The electrodes under investigation show potentiometric response for Fe(II) in the concentration range 8.0 × 10^?7–1.0 × 10^?2 and 5.0 × 10^?7–1.0 × 10^?2 M at 25°C for SPE and CPE, respectively, and the electrode response is independent of pH in the range 1.5–7.0. These sensors show Nernstian slopes of 29.1 ± 0.2 and 29.7 ± 0.16 mV decade^?1 with detection limit values of 8.0 × 10^?7 and 5.0 × 10^?7 M for SPE and CPE, respectively. These electrodes show fast response time of 6 and 4 s and exhibit a lifetime of 100 and 30 days for SPE and CPE, respectively. The mechanism of chemical reaction between modifier and Fe(II) on the SPE surface was studied using infrared spectra, scanning electron microscopy and energy‐dispersive X‐ray analysis. The proposed potentiometric method was validated according to the IUPAC recommendations. The results obtained using the proposed sensors were comparable with those obtained with inductively coupled plasma analysis.     

Development of nanomaterial chemosensors for toxic metal ions sensing

Heavy metal ions are harmful to aquatic life and humans owing to their high toxicity and non‐biodegradability, so their removal from wastewater is an important task. Therefore, this work focuses on designing suitable, simple and economical nanosensors to detect and remove these metal ions with high selectivity and sensitivity. Based on this idea, different types of mesoporous materials such as hexagonal SBA‐15, cubic SBA‐16 and spherical MCM‐41, their chloro‐functionalized derivatives, as well as 4‐(4‐nitro‐phenylazo)‐naphthalen‐1‐ol (NPAN) azo dye have been synthesized, with the aim of designing some optical nanosensors for metal ions sensing applications. The mentioned azo dye has been anchored into the chloro‐functionalized mesoporous materials. The designed nanosensors were characterized using scanning and transmission electron microscopy as well as Fourier transform infrared and UV–visible spectral analysis, nitrogen adsorption–desorption isotherms, low‐angle X‐ray diffraction and thermogravimetric analyses. Their optical sensing to various toxic metal ions such as Cd (II), Hg (II), Mn (II), Fe (II), Zn (II) and Pb (II) at different values of pH (1.1, 4.9, 7 and 12) was investigated. The optimization of experimental conditions, including the effect of pH and metal ion concentration, was examined. The experimental results showed that the solution pH had a major impact on metal ion detection. The optical nanosensors respond well to the tested metal ions, as reflected by the enhancement in both absorption and emission spectra upon adding different concentrations of the metal salts and were fully reversible on adding ethylene diamine tetra acetic acid or citric acid to the formed complexes. High values of the binding constants for the designed nanosensors were observed at pHs 7 and 12, confirming the strong chelation of different metals to the nanosensor at these pHs. Also, high binding constants and sensitivity were observed for NPAN‐MCM‐41 as a nanosensor to detect the different metal ions. From the obtained results, we succeeded in transforming the harmful azo dye into an environmentally friendly form via designing of the optical nanosensors used to detect toxic metal ions in wastewater with high sensitivity.     

Densitometric Kinetic Stability Studies of Some Plant Extracts Using Different Regression Methods

JPC – Journal of Planar Chromatography – Modern TLC -     

Chemistry of Phosphorus Ylides. Part 34 Synthesis of Chromenone Phosphanylidene and Cyclobutylidene Derivatives

Abstract

The reaction of nucleophilic phosphacumulene ylides with visnaginone and khellinone afforded the corresponding phosphanylidene and furochromene derivatives. Moreover, pyranochromenes were obtained from the reaction of chromene carbaldehydes with phosphacumulenes. On the other hand, the phosphanylidene-cyclobutylidenes and their dimers were produced from the reaction of furochromene carbaldehydes with the same phosphonium reagents.     

Simultaneous determination of chlordiazepoxide and selected antidepressants using CZE

A simple CE method was developed and validated for the simultaneous determination of chlordiazepoxide (CHL), amitriptyline, and nortriptyline (mixture I) or the determination of CHL and imipramine (mixture II) using the same BGE. Sertraline and amitriptyline were used as internal standards for the first and second mixtures, respectively. The method allows amitriptyline to be completely separated from its impurity and main metabolite nortriptyline, which can be quantified from 0.2 μg/mL. The separation was achieved using 20 mM potassium phosphate buffer pH 5 containing 12 mM β‐cyclodextrin and 1 mM carboxymethyl‐β‐cyclodextrin. UV detection was performed at 200 nm and a voltage of 15 kV was applied on an uncoated fused‐silica capillary at 25°C. These experimental conditions allowed separation of the compounds to be obtained in 7 min. Calibration graphs proved the linearity up to 40 μg/mL for CHL, up to 100 μg/mL for amitriptyline and imipramine, and up to 5 μg/mL for nortriptyline. The accuracy and precision of the method have been determined by analyzing synthetic mixtures and pharmaceutical formulations. The analytical results were quite good in all cases indicating that the method was linear, sensitive, precise, accurate, and selective for both mixtures.     

Chemical Processes Involving 18-Crown-6-Ether in Activated Noncovalent Complexes with Protonated Peptides

These last decades, it has been widely assumed that 18-crown-6-ether (CE) plays a spectator role during the chemical processes occurring in isolated host-guest complexes between peptides or proteins and CE after activation in mass spectrometers. Our present experimental and theoretical results challenge this hypothesis by showing that CE can abstract a proton or a protonated molecule from protonated peptides after activation by collisions in argon or electron capture/transfer. Furthermore, thanks to comparison between experimental and calculated values of collision cross-sections, we demonstrate that CE can change binding site after electron transfer. We also propose detailed mechanisms for these processes.     

Production of Terretonin N and Butyrolactone I by Thermophilic Aspergillus terreus TM8 Promoted Apoptosis and Cell Death in Human Prostate and Ovarian Cancer Cells

The anticancer activity of terretonin N (1) and butyrolactone I (2), obtained from the thermophilic fungus Aspergillus terreus TM8, was intensively studied against prostate adenocarcinoma (PC-3) and ovary adenocarcinoma (SKOV3) human cell lines. According to this study, both compounds showed potent cytotoxicity towards ovarian adenocarcinoma cells (SKOV3) with IC₅₀ 1.2 and 0.6 μg/mL, respectively. With respect to metastatic prostate cells (PC-3), the two compounds 1 and 2 showed a significantly promising cytotoxicity effect with IC₅₀ of 7.4 and 4.5 μg/mL, respectively. The tested fungal metabolites showed higher rates of early and late apoptosis with little or no necrotic apoptotic pathway in all treated prostate adenocarcinoma (PC-3) and ovary adenocarcinoma (SKOV3) human cell lines, respectively. The results reported in this study confirmed the promising biological properties of terretonin N (1) and butyrolactone I (2) as anticancer agents via the induction of cellular apoptosis. However, further studies are needed to elucidate the molecular mechanism by which cellular apoptosis is induced in cancer cells.