Limited stability of the pH reference material sodium tetraborate decahydrate (“borax”)

Thermogravimetric and X-ray powder diffraction analyses revealed that the pH reference material sodium tetraborate decahydrate (“borax”) is not a stable substance but, loosing some of its water of crystallization, transforms slowly into the pentahydrate. The connected pH changes of the solutions are opposite to and larger than, those expected according to the dilution value of the decahydrate as shown by differential potentiometric measurements. The transformation rate depends on the storing time in the closed original container, the time of and after the first exposure of the material to the atmosphere, the frequency of and the relative humidity during subsequent exposures, and the temperature. The transformation reaction is not understood in detail. However, the experiments showed that sodium tetraborate decahydrate is a reliable pH reference material, whose pH is constant within ΔpH=±0.005 within at least two years after preparation, even if occasionally exposed to the atmosphere. Further work will show whether this time limit can be somewhat extended.     

Fluorescence quenching by excimer formation: quenching constant approximations for excimer formation-dissociation by classical potential models

Fluorescence quenching by excimer formation is studied on the assumption that the excimer formation and dissociation can be modeled as overdamped motion in an attractive potential (classical potential models). An approach to the zeroth-order, concentration-independent quenching constants is proposed which starts from a mean reaction-time ansatz and reduces the calculation essentially to the solution of the eigenvalue problem for the Smoluchowski operator which describes the excimer equilibration. For a square-well potential model it is shown that a quenching constant expansion in terms of relaxation modes, truncated at the kinetic level, gives a satisfactory approximation of the recently obtained exact zeroth-order result under defined conditions. It is demonstrated how this two-mode approach can be applied for a quenching constant estimation if the excimer formation and dissociation are modeled by more realistic interaction potentials, as for instance, Morse- or Gaussian-type ones.     

Fluorinated tellurium(IV) azides and their precursors

The perfluoroaryl tellurolates C₆F₅TeLi (1) and 4-CF₃C₆F₄TeLi (2) were prepared. These intermediates were identified by NMR spectroscopy and may form, depending on the reaction conditions, either the corresponding ditellanes C₆F₅TeTeC₆F₅ (3) and CF₃C₆F₄TeTeC₆F₄CF₃ (4) by subsequent oxidation, or in the case of 1, a telluranthrene (C₆F₄Te)₂ (5) by reaction with itself. The halogenation products of 5, ( C₆F₄Te)₂F₄ (6), (C₆F₄Te)₂Cl₄ (7), (C₆F₄Te)₂Br₄ (8), as well as the azidation product (C₆F₄Te)₂(N₃)₄ (9) were synthesized. Furthermore, in pursuit of our recent work on tellurium azides, the syntheses and properties of R₂Te(N₃)₂ (R=CF₃ (10), C₆F₂H₃ (11)) and RTe(N₃)₃ (R=CF₃ (12) and C₆F₅ (13)) are reported. The crystal structures of CF₃C₆F₄TeTeC₆F₄CF₃ (4), (C₆F₄Te)₂Br₄ (8), and (C₆F₂H₃)₂Te(N₃)₂ (11) were determined.     

Perfluoralkyljod-verbindungen: Darstellungen und eigenschaften von CF3JO,CF3JOF2 und CF3JO2

Perfluoroalkyl iodine compounds: preparations and properties of CF₃IO, CF₃IOF₂, and CF₃IO₂. The trifluoromethyl iodine compounds CF₃IO, CF₃IOF₂, and CF₃IO₂ are formed from the reactions of CF₃I, CF₃IF₂ or CF₃IF₄ with ozone or silicon dioxide respectively. Their preparartions, properties, ¹⁹F-nmr spectra, and ir spectra are described.     

Coligand role in the NHC nickel catalyzed C–F bond activation: investigations on the insertion of bis(NHC) nickel into the C–F bond of hexafluorobenzene

The reaction of [Ni(Mes₂Im)₂] (1) (Mes₂Im = 1,3-dimesityl-imidazolin-2-ylidene) with polyfluorinated arenes as well as mechanistic investigations concerning the insertion of 1 and [Ni(ⁱPr₂Im)₂] (1ipr) (ⁱPr₂Im = 1,3-diisopropyl-imidazolin-2-ylidene) into the C–F bond of C₆F₆ is reported. The reaction of 1 with different fluoroaromatics leads to formation of the nickel fluoroaryl fluoride complexes trans-[Ni(Mes₂Im)₂(F)(Ar^F)] (Ar^F = 4-CF₃-C₆F₄2, C₆F₅3, 2,3,5,6-C₆F₄N 4, 2,3,5,6-C₆F₄H 5, 2,3,5-C₆F₃H₂6, 3,5-C₆F₂H₃7) in fair to good yields with the exception of the formation of the pentafluorophenyl complex 3 (less than 20%). Radical species and other diamagnetic side products were detected for the reaction of 1 with C₆F₆, in line with a radical pathway for the C–F bond activation step using 1. The difluoride complex trans-[Ni(Mes₂Im)₂(F)₂] (9), the bis(aryl) complex trans-[Ni(Mes₂Im)₂(C₆F₅)₂] (15), the structurally characterized nickel(i) complex trans-[Ni^I(Mes₂Im)₂(C₆F₅)] (11) and the metal radical trans-[Ni^I(Mes₂Im)₂(F)] (12) were identified. Complex 11, and related [Ni^I(Mes₂Im)₂(2,3,5,6-C₆F₄H)] (13) and [Ni^I(Mes₂Im)₂(2,3,5-C₆F₃H₂)] (14), were synthesized independently by reaction of trans-[Ni(Mes₂Im)₂(F)(Ar^F)] with PhSiH₃. Simple electron transfer from 1 to C₆F₆ was excluded, as the redox potentials of the reaction partners do not match and [Ni(Mes₂Im)₂]⁺, which was prepared independently, was not detected. DFT calculations were performed on the insertion of [Ni(ⁱPr₂Im)₂] (1ipr) and [Ni(Mes₂Im)₂] (1) into the C–F bond of C₆F₆. For 1ipr, concerted and NHC-assisted pathways were identified as having the lowest kinetic barriers, whereas for 1, a radical mechanism with fluoride abstraction and an NHC-assisted pathway are both associated with almost the same kinetic barrier.

A combined experimental and theoretical study on the mechanism of the C–F bond activation of C₆F₆ with [Ni(NHC)₂] is provided.     

Perfluoralkyljod-verbindungen: das trifluormethyljod-bis-trifluoracetat CF3J(OCOCF3)2

CF₃I(OCOCF₃)₂ is formed from the reactions of CF₃IF₂ or CF₃IO with trifluoroacetic anhydride at low temperature. During the reaction of CF₃IF₂ with (CF₃CO)₂O CF₃IF(OCOCF₃) is formed as an intermediate product. The preparation, the ¹⁹F-nmr spectra and the thermal decomposition are described.     

Wärmekapazitätsmessungen Nach Scanning-Methoden Bis Zu Hohen Temperaturen

Scanning calorimetric methods permit determination of heat capacities at high temperatures up to 1600°C. For disk systems with power compensation application limits are in order of 700°C, and for cylindrical systems with electrical calibration up to 1000°C. For the high temperature range above 1000°C DSC plates and a cylindrical calorimetric systems based on the CALVET principle ('MULTI HTC’) are known. For cylindrical calorimetric systems the precision of the Cp data is between 2 and 5% even at high temperatures without any requirements on the kind and shape of samples. These results are better than data provided by DSC plate systems. This revised version was published online in July 2006 with corrections to the Cover Date.     

Conformational analysis of self-organized monolayers with scanning tunneling microscopy at near-atomic resolution

We describe the synthesis and a novel approach to the conformational analysis of 2,2'-bipyridines (bpy) bearing aromatic rich Frechet-type dendritic wedges of the first and second generation as substituents. The evaporation of solutions of these new ligands on graphite surfaces under ambient conditions results in the formation of self-organized monolayers. Scanning tunneling microscopy (STM) investigations of the monolayers under ambient conditions (air, 298 K) gave images at submolecular and near-atomic resolution. The analysis of the STM images includes the following processes: (i) identification and reproduction of potential homoconformational domains, (ii) exclusion of improper data using quality criteria for drift and feedback artifacts, (iii) compilation of running averages and checking for averaging artifacts, (iv) analysis of three-dimensional and contour plots, (v) calculation of the HOMO properties of the free molecules, and (vi) final conformational assignment based on all accessible information. Following this procedure, two different conformations could be assigned to domains observed in the monolayers of the first-generation (G1) and second-generation (G2) dendritic compounds. Homoconformational domains are observed side-by-side. The different conformations arise from syn or anti arrangements at the ether substituents. An additional conformational effect is found upon treating the G1 domains with HCl gas, when a partial rearrangement of the bpy from trans to cis occurs, concomitant with protonation.