Preparation and properties of the biodegradable graded blend of poly(L‐lactic acid) and poly(ethylene oxide)

We prepared biodegradable poly(ethylene oxide) (PEO)/poly(L ‐lactic acid) (PLLA) graded blends by the dissolution–diffusion process, and discussed the biodegradability and tensile strength of the graded blends by comparing isotropic blend and PLLA only. All the graded blends were degraded more largely than the PLLA only and isotropic blend (PEO: 37.5 wt %), which had the same content as the total content of those graded blends. The graded blend having most excellent wide compositional gradient was degraded most largely with the enzyme. Thus, graded structure of the blends promoted their biodegradabilities large. It was considered that the dissolution of PEO with water increased the surface area attacked by the enzyme, while PEO caught PLLA oligomers to promote the biodegradation of PLLA. Then, the biodegradabilities of the graded blends were suppressed by the increasing crystallinity of PLLA. Furthermore, the strengths of all the graded blends were larger than those of the isotropic blend. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2972–2981, 2007     

Cerasome as an Organic-Inorganic Vesicular Nanohybrid: Characterization of Cerasome-Forming Lipids having a Single or a Dual Trialkoxysilyl Head

Morphological characterization of the organic-inorganic vesicular nanohybrids, Cerasomes, was performed in aqueous media from two aspects. Firstly, a novel Cerasome-forming lipid having two triethoxysilyl groups in the head moiety was synthesized and the physical property of the Cerasome was investigated. While the morphological stability of the Cerasomes, as evaluated from the vesicular collapse behavior against a micelle-forming nonionic surfactant, Triton-X 100, was extremely higher than that of the conventional phospholipid liposome, the stabilities were comparable to each other for the Cerasomes derived from the dual- and single-head lipids. On the other hand, the surface property of the Cerasome formed with the dual-head lipid more closely resembled the colloidal silica particles rather than that derived from the single-head lipid, as suggested by zeta-potential measurements. Secondly, the effect of the media pH on the morphological stability of the Cerasome formed with the single-head lipid was evaluated and appeared as a time difference in obtaining the morphological stability of the Cerasome. These morphological characteristics of the Cerasomes could be mainly owing to the development of the siloxane network on the vesicular surface.     

在粗糙表面上用液晶空间光调制器进行振动测量

为实现在一段时间内连续实时观测振动物体的全息干涉图形,采用覆盖铝箔的喇叭作为振动物体,利用铝箔原有未经特殊处理表面反射的漫反射光成像,并用光寻址液晶空间光调制器(Liquid crystal-sparial lightmodulator,LC-SLM)作为全息记录载体,来实现振动测量。实验中采用时间平均干涉测量法,得到了不同振动频率下物体的干涉图形。同时在连续改变振动物体的振动频率时,可以清晰地观察到物体振动全息干涉图形的变化过程,即近实时的全息干涉图形。     

Composition spread metal thin film fabrication technique based on ion beam sputter deposition

A composition spread metal thin film fabrication technique based on ion beam sputter deposition method was developed. The technique enables us to fabricate any desired part or a complete binary/ternary composition spread metal thin films onto a single substrate by sequentially sputtering different target materials. Composition spread metal thin films can be deposited directly on a dielectric film in patterned electrode shape for C-V and I-V measurements. The system could be especially useful in the search for new multi-component metal gate materials.     

Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.     

Peroxyoxalate chemiluminescence detection of condensates of malondialdehyde with thiobarbituric acids using a flow system.

The peroxyoxalate chemiluminescence(CL) detection method for the evaluation of the CL intensity of malondialdehyde(MDA) condensates with seven 2-thiobarbituric acid derivatives is described. The method consists of a flow injection technique together with a CL detection system using bis(2,4,6-trichlorophenyl) oxalate(TCPO) and hydrogen peroxide as chemiluminogenic reagents. Linear correlations between CL intensity and concentration are obtained for pmol levels of condensates. Among the condensates, 1,3-diethyl-2-thiobarbituric acid(DETBA)-MDA shows the largest CL intensity. High performance liquid chromatography (HPLC)/CL detection of DETBA-MDA and 1,3-diphenyl-2-thiobarbituric acid(DPTBA)-MDA using a mixture of TCPO and hydrogen peroxide in acetonitrile as a postcolumn reagent solution is also described. The detection limits for DETBA-MDA and DPTBA-MDA are 20 and 200 fmol, respectively, per 20 microL injection at a signal-to-noise ratio of 2. This HPLC/CL detection system was applied to the determination of MDA in rat brains by using DETBA as a fluorescent derivatizing reagent.     

Copper(II)-catalyzed oxidation of d-alpha-tocopherol by oxygen in aqueous solution

alpha-Tocopherol (alpha-Toc) was solubilized in aqueous solutions using 13 solubilizing agents and the products of oxidation by oxygen in the presence and the absence of Cu(II) were analyzed by HPLC. In the presence of Cu(II), the oxidation was accelerated and 5-formyl-7,8-dimethyltocol and alpha-tocoquinone were the major oxidation products. Their yields greatly increased in the presence of Cu(II). The yields and the rates of formation of the products were dependent on the properties of solubilizing agents and other conditions as well as the presence of Cu(II) or other metal ions. It is suggested that slight changes in the structure of the solubilizing agents affect the course of the reaction.     

Sensitive determination of diazepam and N-desmethyldiazepam in human material using capillary gas chromatography-mass spectrometry

A reliable and sensitive capillary gas chromatographic-mass spectrometric method was developed for the detection and determination of diazepam and its major metabolite, N-desmethyldiazepam, in human material. Medazepam served as the internal standard. Quantitative determination was achieved using mass fragmentography with selected ions of m/z 256 for diazepam and m/z 242 for N-desmethyldiazepam and medazepam. The limit of detection was 1 ng/g and the recoveries were 98.54 +/- 3.95% for diazepam and 98.66 +/- 6.48% for N-desmethyldiazepam. The calibration graph was linear over the concentration range from 1.0 ng/g to 1.0 microgram/g for diazepam and N-desmethyldiazepam. Using this method, trace amounts of diazepam and N-desmethyldiazepam were detected in the tissues of an autopsied individual.