Transient dynamic analysis of cracked structures with multiple contact pairs using generalized HSNC

Nonlinear Dynamics - The development of efficient computational methods for cracked structures is critical in the fields of civil, mechanical, and aerospace engineering since the influence of...     

Leading-edge flow criticality as a governing factor in leading-edge vortex initiation in unsteady airfoil flows

A leading-edge suction parameter (LESP) that is derived from potential flow theory as a measure of suction at the airfoil leading edge is used to study initiation of leading-edge vortex (LEV) formation in this article. The LESP hypothesis is presented, which states that LEV formation in unsteady flows for specified airfoil shape and Reynolds number occurs at a critical constant value of LESP, regardless of motion kinematics. This hypothesis is tested and validated against a large set of data from CFD and experimental studies of flows with LEV formation. The hypothesis is seen to hold except in cases with slow-rate kinematics which evince significant trailing-edge separation (which refers here to separation leading to reversed flow on the aft portion of the upper surface), thereby establishing the envelope of validity. The implication is that the critical LESP value for an airfoil–Reynolds number combination may be calibrated using CFD or experiment for just one motion and then employed to predict LEV initiation for any other (fast-rate) motion. It is also shown that the LESP concept may be used in an inverse mode to generate motion kinematics that would either prevent LEV formation or trigger the same as per aerodynamic requirements.     

Design,Synthesis, and Anticancer Activity of Bis-isoxazole Incorporated Benzothiazole Derivatives

Russian Journal of General Chemistry - A novel series of bis-isoxazole incorporated benzothiazole derivatives has been designed and synthesized. Molecular structures of the compounds have been...     

Validated liquid chromatography–tandem mass spectrometry method for simultaneous quantitation of bendamustine and copanlisib in mouse plasma: Application to a pharmacokinetic study in mice

In this study, we report the development and validation of an LC–tandem mass spectrometry method for the simultaneous quantitation of bendamustine and copanlisib in mouse plasma as per the US FDA regulatory guidelines. The sample processing involves extraction of bendamustine and copanlisib along with internal standard (IS; warfarin) from 50 μL mouse plasma using a liquid–liquid extraction method. The chromatographic separation of bendamustine, copanlisib and the IS was achieved on an Atlantis dC₁₈ column using an isocratic mobile phase (5 mM ammonium acetate:methanol, 20:80 v/v). Bendamustine, copanlisib and the IS eluted at 0.88, 1.39 and 0.74 min, respectively, with a total run time of 2.5 min. The calibration curve ranged from 3.99–2996 and 4.33–3248 ng/mL for bendamustine and copanlisib, respectively. Inter- and intra-day precision and accuracy, stability in processed samples and upon storage, dilution integrity and incurred sample reanalysis were investigated for both the analytes. The intra- and inter-day precisions were in the ranges of 2.01%–5.05% and 2.74%–6.13% and 1.98%–7.64 and 8.62%–9.04% for bendamustine and copanlisib, respectively. Stability studies showed that both analytes were stable on bench top for 6 h, in auto-sampler for 24 and at −80°C for 30 days. The validated method was successfully applied to a pharmacokinetic study in mice.     

Investigation on Impurity Profiling and Degradation Behavior of WCK 771

Chromatographia - WCK 771 is a novel antibacterial drug recently launched in India for the treatment of acute bacterial skin and skin structure infections (ABSSSI). This report describes...     

Simultaneous determination of novel β-lactamase inhibitor WCK 4234 and Meropenem in dog plasma by LC–MS/MS and its application to preclinical pharmacokinetic study

A precise and accurate liquid chromatography–tandem mass spectrometric (LC–MS/MS) bioanalytical method has been developed and validated for the simultaneous quantification of WCK 4234 and meropenem (MEM) in dog plasma. Protein precipitation using acetonitrile was employed as a sample preparation approach. Cefepime was used as an internal standard. The developed method was selective, sensitive (limit of quantification, 0.075 μg/ml for both drugs), accurate (recovery > 90%), precise (CV < 10%) and linear (r² ≥ 0.99, concentration range 0.075–120 μg/ml for both analytes). The developed method was successfully applied for the determination of both drugs in plasma to assess the pharmacokinetics in beagle dogs. WCK 4234 + MEM in a 1:1 ratio at 15 + 15 and 30 + 30 mg/kg doses were administered by the intravenous route. The mean plasma concentration and area under the concentration–time curve of WCK 4234 ranged from 38.3 to 77.4 μg/ml and from 47.8 to 77.1 μg h/ml, respectively, and the values for MEM ranged from 52.2 to 115.3 μg/ml and 70.5 to 133.6 μg h/ml respectively. The elimination half-life of WCK 4234 and MEM was around 0.8 h.     

Development and Validation of a High-Performance Thin-Layer Chromatographic Method for the Simultaneous Estimation of Torsemide and Eplerenone by Quality by Design Approach

JPC – Journal of Planar Chromatography – Modern TLC - This paper includes the development of a novel, systematic, quality by design (QbD)-based high-performance thin-layer...     

Screening gas-phase chemical kinetic models: Collision limit compliance and ultrafast timescales

Detailed gas-phase chemical kinetic models are widely used in combustion research, and many new mechanisms for different fuels and reacting conditions are developed each year. Recent works have highlighted the need for error checking when preparing such models, but a useful community tool to perform such analysis is missing. In this work, we present a simple online tool to screen chemical kinetic mechanisms for bimolecular reactions exceeding collision limits. The tool is implemented on a user-friendly website, cloudflame.kaust.edu.sa, and checks three different classes of bimolecular reactions; (ie, pressure independent, pressure-dependent falloff, and pressure-dependent PLOG). In addition, two other online modules are provided to check thermodynamic properties and transport parameters to help kinetic model developers determine the sources of errors for reactions that are not collision limit compliant. Furthermore, issues related to unphysically fast timescales can remain an issue even if all bimolecular reactions are within collision limits. Therefore, we also present a procedure to screen ultrafast reaction timescales using computational singular perturbation. For demonstration purposes only, three versions of the rigorously developed AramcoMech are screened for collision limit compliance and ultrafast timescales, and recommendations are made for improving the models. Larger models for biodiesel surrogates, tetrahydropyran, and gasoline surrogates are also analyzed for exemplary purposes. Numerical simulations with updated kinetic parameters are presented to show improvements in wall-clock time when resolving ultrafast timescales.     

Synthesis and Crystal Structure Analysis of 3,3'-[(3-Sulfanyl Phenyl)Methylene]Bis(4-Hydroxy-2H-1-Benzopyran-2-One) : 5-Methyl-1,3-Thiazol-2(3H)-Imine

Crystallography Reports - The structure of 3,3'-[(3-sulfanylphenyl)methylene]bis(4-hydroxy-2H-1-benzopyran-2-one) : 5-methyl-1,3-thiazol-2(3H)-imine was determined by X-ray crystallography. It...     

Synthesis,Characterization, and Antibacterial Activity of Novel (1H‐Benzo[d]imidazole‐2‐yl)‐6‐(diethylamino)‐3H‐one‐xanthene,Phenoxazine, and Oxazine

A series of novel (1H‐benzo[d]imidazole‐2‐yl)‐6‐(diethylamino)‐3H‐one‐xanthene, phenoxazine, and oxazine derivatives have been synthesized from 2‐(2′,4′‐dihydroxyphenyl) benzimidazole intermediate. Synthesized compounds 8a , 8b , 8c , 8d are fluorescent in solution, photophysical properties of compounds were studied and results revealed that compounds absorb and emit in UV–visible region with good fluorescence quantum yield. Synthesized compounds are thermally stable up to 300°C. The antibacterial activities of the synthesized compounds were studied by the well‐diffusion method. Escherichia coli (ATTC‐25922), Staphylococcus aureus (ATCC‐25923), Micrococcus (ATCC‐4698), and Bacillus subtilis (ATCC‐55422) were used to investigate the antibacterial activities.