Experimental study on a separate type thermosyphon

The passages of vapor flow and the returning liquid flow, are perfectly partitioned in a separate thermosyphon. Therefore the flooding limit can be eliminated, and practicability based on its construction is highly evaluated. In the present work, a container tube made of heat resisting glass, in which an electric heater is inserted, is selected as the heating section of the experimental equipment. Distilled water is used as the working fluid. The influence of the heater type, the diameter of evaporating section and the liquid fill charge on the heat transfer performance have been studied. The larger heat transfer coefficient is achieved in the case of the U type heater, the larger tube diameter and the less liquid fill charge of the evaporating section. The useful correlation equations of the heat transfer coefficient in the evaporator have been derived.

---

Experimentelle Untersuchung an einem Trennstrom-Thermosiphon

Zusammenfassung In einem Trennstrom-Thermosiphon sind die Strömungskanäle für die Dampfströmung und den Kondensatrücklauf vollkommen separiert. Die Flutgrenze kann deshalb unberücksichtigt bleiben. In dieser Untersuchung dient ein temperaturbeständiges Glasrohr mit innenliegender Heizung als Wärmequelle. Arbeitsmedium ist destilliertes Wasser. Untersucht wurden der Einfluß des Heizelementtyps, des Durchmessers der Verdampferstrecke und der Füllmenge auf das Wärmeüber-gangsverhalten. Das U-Typ Heizelement liefert bei größerem Rohrdurchmesser und geringerer Füllmenge in der Verdampferstrecke die höchsten Wärmeübergangskoeffizienten. Für diese wurden Korrelationsgleichungen aufgestellt.

     

Dependence of tracking error characteristics of in-line-type differential push-pull methods on arrangement error of segmented gratings

We present the validity of in-line-type differential push-pull methods using segmented gratings with respect to arrangement errors by numerical calculation for the first time. In these differential push-pull methods, the segmented gratings for generating subspots are divided into more than two regions, each with a specific width and a specific phase value, and are ideally arranged on the optical axis. We calculate tracking error signals in these methods with respect to the arrangement errors against the optical axis under parameter conditions of the widths of the segmented regions of the gratings. The obtained results show that the grating with a simpler configuration with two regions reveals good compatibility between DVD-recordable (DVD-R) and DVD-random access memory (DVD-RAM) compared with those with three or four regions, when the arrangement error is less than 10% of the radius of the incident laser beam.     

Chemoselective N-acetylation of primary aliphatic amines promoted by pivalic or acetic acid using ethyl acetate as an acetyl donor

The combination of pivalic or acetic acid as a promoter and EtOAc as a solvent and acetyl donor proved to be efficient for the chemoselective N-acetylation of primary aliphatic amines to afford the corresponding acetamides. We developed a simple and convenient approach, which requires mild reaction conditions. Competitive inter- and intramolecular reactions between aliphatic amines, alcohols, and aromatic amines were examined, and chemoselectivity was achieved by adjusting the conditions of the reaction.     

Solution viscosity behavior of polystyrene-based cationic ionomers. Effects of ion content and solvent

Dilute-solution viscosities of polystyrene-based cationic ionomers containing ammonio or phosphonio groups were measured in several solvents. In polar solvents with dielectric constant (ε_r) beyond 10, the ionomers showed a typical polyelectrolyte behavior, indicating that a large part of ionic groups were dissociated into ions. In nonpolar solvents with low ε_r, the reduced viscosity of the ionomers linearly decreased with a decreasing ionomer concentration. At low polymer concentrations, every ionomer gave a reduced viscosity lower than that of the corresponding chloromethylated polystyrene. With an increasing ion content, the intrinsic viscosity progressively decreased if the nonpolar solvents had a low acceptor number (A_N), such as toluene or tetrahydrofran (THF). In the halogenated solvents with high A_N value, such as chloroform, however, the intrinsic viscosity was hardly dependent on the ion content. This indicates that the intramolecular aggregation among the ionic groups is inhibited in the halogenated solvents due to a strong anion solvation. An addition of a protic solvent to a nonpolar solvent eliminates the aggregation between ionic groups and leads to polyelectrolyte behavior. © 1994 John Wiley & Sons, Inc.     

Numerical solutions to the time-dependent Bloch equations revisited

The purpose of this study was to demonstrate a simple and fast method for solving the time-dependent Bloch equations. First, the time-dependent Bloch equations were reduced to a homogeneous linear differential equation, and then a simple equation was derived to solve it using a matrix operation. The validity of this method was investigated by comparing with the analytical solutions in the case of constant radiofrequency irradiation. There was a good agreement between them, indicating the validity of this method. As a further example, this method was applied to the time-dependent Bloch equations in the two-pool exchange model for chemical exchange saturation transfer (CEST) or amide proton transfer (APT) magnetic resonance imaging (MRI), and the Z-spectra and asymmetry spectra were calculated from their solutions. They were also calculated using the fourth/fifth-order Runge-Kutta-Fehlberg (RKF) method for comparison. There was also a good agreement between them, and this method was much faster than the RKF method. In conclusion, this method will be useful for analyzing the complex CEST or APT contrast mechanism and/or investigating the optimal conditions for CEST or APT MRI.     

Generalized equation for describing the magnetization in spoiled gradient-echo imaging

The purpose of this study was to demonstrate a generalized equation for describing the magnetization in spoiled gradient-echo (SPGR) imaging in which the in-pulse relaxation and magnetization transfer (MT) effects are taken into account. First, the time-dependent Bloch equations for the two-pool exchange model with MT effect were reduced to an inhomogeneous linear differential equation, and then a simple equation was derived to solve it using a matrix operation. Second, the equations describing the magnetization before and after the radiofrequency (RF) pulse were derived based on the above solution for the RF-pulse excitation and evolution phases. Finally, a generalized equation describing the steady-state magnetization was derived. The validity of this equation was investigated by comparing with the transverse magnetization obtained by the regular Ernst equation and analytical solution in which the in-pulse transverse relaxation is considered. When the same assumption was made in our method, there were good agreements between them, indicating the validity of our method. The in-pulse transverse and longitudinal relaxations decreased the transverse magnetization compared to the case in which these effects were neglected, whereas MT increased it. In conclusion, we derived a generalized equation for describing the magnetization in SPGR imaging. This equation will provide a suitable basis for understanding the signal intensity in SPGR imaging and/or T₁ measurement using an SPGR sequence in cases in which the effect of in-pulse relaxation and/or MT cannot be neglected.     

A mesoporous non-precious metal boride system: synthesis of mesoporous cobalt boride by strictly controlled chemical reduction

Generating high surface area mesoporous transition metal boride is interesting because the incorporation of boron atoms generates lattice distortions that lead to the formation of amorphous metal boride with unique properties in catalysis. Here we report the first synthesis of mesoporous cobalt boron amorphous alloy colloidal particles using a soft template-directed assembly approach. Dual reducing agents are used to precisely control the chemical reduction process of mesoporous cobalt boron nanospheres. The Earth-abundance of cobalt boride combined with the high surface area and mesoporous nanoarchitecture enables solar-energy efficient photothermal conversion of CO₂ into CO compared to non-porous cobalt boron alloys and commercial cobalt catalysts.

Generating high surface area mesoporous transition metal boride is challenging but interesting because incorporation of boron atoms can generate lattice distortion to form amorphous metal boride which has unique properties in catalysis.     

The first asymmetric esterification of free carboxylic acids with racemic alcohols using benzoic anhydrides and tetramisole derivatives: an application to the kinetic resolution of secondary benzylic alcohols

A variety of optically active carboxylic esters are produced by the kinetic resolution of racemic secondary benzylic alcohols using free carboxylic acids with benzoic anhydride and tetramisole derivatives. 4-Methoxybenzoic anhydride (PMBA) is the best reagent to use in producing the corresponding esters in high ee when the reaction is catalyzed by (+)-benzotetramisole (BTM); by contrast, when non-substituted benzoic anhydride is used as a coupling reagent, the resulting optically active alcohols are obtained with high selectivities. This protocol directly produces chiral carboxylic esters from free carboxylic acids and racemic secondary alcohols by utilizing the trans-acylation process to generate mixed anhydrides from acid components and benzoic anhydride derivatives under the influence of chiral catalysts.     

Synthesis and anti-HIV-1 activity of novel 10-thiaisoalloxazines,a structural analog of C-5 and/or C-6 substituted pyrimidine acyclonucleoside

A series of novel 10-thiaisoalloxazine derivatives bearing an alkoxymethyl or benzyloxymethyl moiety at the N-1 position has been synthesized through the bromination of 1-substituted-5-hydroxyuracils and subsequent condensation with aminobenzenethiol in a one-pot reaction. Contrary to the previous report, the formation of intermediary 5,6-diethoxy-5-hydroxy-5,6-dihydrouracil seems to be not the necessary factor for the formation of the thiaisoalloxazines, since the reaction proceeds in tetrahydrofuran (THF) or acetonitrile far more smoothly than in ethanol. The anti-human immunodeficiency virus (HIV)-1 activity of the resulted thiaisoalloxazine derivatives was evaluated in lymphocyte cells based on the inhibitory activity against the viral-induced cytopathic activity. Among the derivatives, compounds 6, 7, and 8 bearing an alkoxymethyl moiety at the N-1 position exhibited modest inhibitory activity towards the cytotopathic effect of HIV-1.     

Initial quantum levels of captured muons in CO,CO2, and COS

The role of valence electrons for the muon capture process by molecules is experimentally investigated with the aid of cascade calculations. Low-momentum muons are introduced to gas targets of CO, CO₂, and COS below atmospheric pressure. The initial states of captured muons are determined from the measured muonic X-ray structure of the Lyman and Balmer series. We propose that the lone pair electrons in the carbon atom of CO significantly contribute to the capture of a muon with large angular momenta.