Synthesis, characterization, and adsorption properties of nanocrystalline ZSM-5

Nanocrystalline ZSM-5 with a Si/Al ratio of 20 was synthesized using clear solutions and a hydrothermal synthesis procedure. The resulting ZSM-5 materials were characterized by powder X-ray diffraction, scanning electron microscopy (SEM), nitrogen adsorption isotherms, solid-state nuclear magnetic resonance, and toluene adsorption. A commercial ZSM-5 sample was similarly characterized for comparison with the synthesized materials. The particle sizes of the synthesized ZSM-5 samples were calculated using the measured external surface areas and were determined to be 15 and 60 nm. SEM images indicated that the ZSM-5 samples consist of agglomerated and possibly intergrown particles. Toluene adsorption measurements showed that the ZSM-5 sample with a particle size of 15 nm adsorbed approximately 50% more toluene than the other ZSM-5 samples, most likely due to the adsorption of toluene on the external surface. For the toluene adsorbed on the internal zeolite surface, approximately one toluene molecule was adsorbed per channel intersection for each of the ZSM-5 samples.     

Modeling Sub- and Super-ambient Heat Capacities of the Group Iva Compounds Despite the Lanthanide Contraction

This paper is concerned with the estimation of heat capacities in the IVA 3d-transition element compounds using especially Zr and Hf compounds as examples. Most prediction schemes routinely tacitly assume that volumes and masses trend in parallel. However, the lanthanide contraction here ensures for ZrX/HfX systems — and generally elsewhere — that this is not so in this portion of the periodic table. Available methods such as Latimer's, Volumetric Priority, Komada-Westrum, Grimvall's, and Sommers' are compared on IVA elements and compounds. Only the Sommers approach has volumetric input. It provides the best prediction.This revised version was published online in November 2005 with corrections to the Cover Date.     

Directed flow of lambda hyperons in (2-6 )A GeV Au+Au collisions

Directed flow measurements for Lambda hyperons are presented and compared to those for protons produced in the same Au+Au collisions (2A, 4A, and 6A GeV; b<5-6 fm). The measurements indicate that Lambda hyperons flow consistently in the same direction but with smaller magnitudes. A strong positive flow [for Lambdas] has been predicted in calculations which include the influence of the Lambda-nucleon potential. The experimental flow ratio Lambda/p is in qualitative agreement with expectations (approximately 2/3) from the quark counting rule at 2A GeV but is found to decrease with increasing beam energy.     

Sideward flow in Au+Au collisions between 2A and 8A GeV

Using the large acceptance Time Projection Chamber of experiment E895 at Brookhaven, measurements of collective sideward flow in Au+Au collisions at beam energies of 2A, 4A, 6A, and 8A GeV are presented in the form of in-plane transverse momentum and the first Fourier coefficient of azimuthal anisotropy v(1). These measurements indicate a smooth variation of sideward flow as a function of beam energy. The data are compared with four nuclear transport models which have an orientation towards this energy range. All four exhibit some qualitative trends similar to those found in the data, although none show a consistent pattern of agreement within experimental uncertainties.     

Investigation of a catalyst ink dispersion using both ultra-small-angle X-ray scattering and cryogenic TEM

The dispersion of Nafion ionomer particles and Pt/C catalyst aggregates in liquid media was studied using both ultra-small-angle X-ray scattering (USAXS) and cryogenic TEM. A systematic approach was taken to study first the dispersion of each component (i.e., ionomer particles and Pt/C aggregates), then the combination of the components, and last the catalyst ink. Multiple-level curve fitting was used to extract the particle size, size distribution, and geometry of the Pt/C aggregates and the Nafion particles in liquid media from the scattering data. The results suggest that the particle size, size distribution, and geometry are not uniform throughout the systems but rather vary significantly. It was found that the interaction of each component (i.e., the Nafion ionomer particles and the Pt/C aggregates) occurs in the dispersion. Cryogenic TEM was used to observe the size and geometry of the particles in liquid directly and to validate the scattering results. The TEM results showed excellent agreement.     

Monolithic excitation and manipulation of surface plasmon polaritons on a vertical cavity surface emitting laser

We report the manipulation of surface plasmon polaritons (SPPs) on a thin Au layer integrated on top of the mirror of a vertical-cavity surface-emitting laser (VCSEL). Gratings etched into the Au layer to different depths are used to couple the light into and out of the film, and to bend the trajectory of the SPP. The result paves the way to compact integrated plasmonic devices.     

Soy-oil-based segmented polyurethanes

Segmented polyurethanes were prepared from soy polyol, diphenyl methane diisocyanate (MDI), and ethylene glycol or butane diol as chain extenders. Samples were prepared with true hard-segment concentrations (HSC) of about 0, 10, and 40%. Both the soft MDI–polyol and hard MDI/diol segments are glassy at room temperature. These samples were also crosslinked through the polyfunctional polyol soft segment. Partial crystallinity and phase separation were detected in samples with 40% HSC, on the basis of DSC data. Small-angle X-ray scattering shows the existence of phase separation with domain sizes of about 10 nm in the 40% HSC samples, but not in the others. The distribution of domain sizes is considerably broader for the ethylene-glycol extended system compared with that for the butane-diol case. Although the presence of hard segments lowers the crosslink density, samples with higher HSC had higher glass transition temperatures, higher strengths, higher moduli, lower swelling, lower elongation at break, and lower impact strengths. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3178–3190, 2005     

Preparation, characterization, and application of polypropylene-clinoptilolite composites for the selective adsorption of lead from aqueous media

The miscibility, mechanical and morphological properties of mixed Langmuir and Langmuir-Blodgett monolayers prepared from the phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and the perfluorinated fatty acid perfluorooctadecanoic acid have been studied as a function of film composition and subphase salinity. It was demonstrated here, for the first time, that the extent of surfactant miscibility in mixed phospholipid-perfluoroacid monolayers, and hence the resulting mechanical properties of the monolayer film, can be controlled by altering the concentration of sodium ions in the underlying subphase. Elevated Na(+) concentrations resulted in lower net attractive interactions between film components, likely through specific ion adsorption to the negatively-charged perfluoroacid, along with decreased film elasticities. These results differ significantly from conventional fatty-acid-carboxylate monolayer systems in which film cohesion is typically enhanced through adsorption of cations to surfactant headgroups. Atomic force microscope images of films deposited onto solid mica substrates revealed that the films deposited from pure water formed multimolecular aggregates of surfactant, which could be attributed to the highly cohesive nature of the films, but the use of salt in the subphase diminished aggregate formation and resulted in the production of homogeneous monolayer films.     

Shape Matters: A Gold Nanoparticle Enabled Shape Memory Polymer Triggered by Laser Irradiation

With incorporation of gold nanoparticles, i.e., nanorods (AuNR) and nanospheres (AuNS), into a polyurethane‐based shape‐memory polymer (SMP) EG‐72D matrix, SMP nanocomposite films capable of being remotely triggered by low‐power laser are fabricated and characterized using UV‐vis‐NIR spectroscopy, X‐ray scattering, and dynamic mechanical analysis (DMA). It is demonstrated that, with incorporation of very low concentration of gold nanorods (≈0.1 wt%), the mechanically programmed EG‐72D/AuNR nanocomposite presents rapid response to low power laser irradiation (785 nm, ≈10 mW). Comparative studies on the laser irradiation response of EG‐72D/AuNS and EG‐72D/AuNR nanocomposite films suggest that AuNRs have significantly higher photothermal conversion efficiency than AuNS and on‐resonance laser irradiation, matching the wavelength of the incident laser with the longitudinal plasmon resonance of AuNR, is necessary to induce the fast response of gold nanoparticle enabled SMP nanocomposites.