Characterization of sulfate-reducing bacteria in yeast industry waste by microcalorimetry and PCR amplification

Sulfate-reducing bacteria (SRB) were isolated from anaerobic sludge of yeast factory wastewater treatment plant by cultivation on Postgate C medium. Microcalorimetry was used to monitor the anaerobic digestion processes and to measure the growth rates of sulfate-reducing bacteria. The maximum growth rates determined by microcalorimetry and ATP analysis were different—μ_max(dQ/dt) = 0.165 ± 0.008 h⁻¹ and μ_max(N_ATP) = 0.207 ± 0.013 h⁻¹. Experiments on the cultivation of SRB from yeast industry wastewater treatment plant in batch culture showed that during the first 20 h the concentration of sulfate decreased from 78.3 mM down to 62.2 mM while the increase of sulfide production was negligible. Perceptible amount of sulfide (7.82 mM) appeared on the 33.5 h of fermentation together with a peak on the power–time curve and considerable increase in the cell count (1.26 × 10⁹). First steps of sulfate metabolism (activation of sulfate by ATP sulfurylase, production of H₂) are accompanied by endothermic heat effects, therefore the values of thermal power remain moderate until the evolution of sulfide starts. The influence of green microalgae Chlorococcum sp. (preparation Biotreat 100) on the growth characteristics of microorganisms was also studied. Identification of one SRB strain was started by sequencing of PCR-amplified 16S rRNA gene. Two sets of primers were used for PCR amplification, both specific for domain Bacteria but giving different gene fragments. PCR-products were purified with JETQUICK kit according to the manufacturer instructions.     

Planar Chromatography of Some 1-Arylpiperazines Behaving as Dopaminergic Ligands

JPC – Journal of Planar Chromatography – Modern TLC - The chromatographic behavior of fourteen 1-arylpiperazine derivatives has been studied by thin-layer chromatography on both silica...     

Electron beam induced modification of poly(ethylene terephthalate) films

Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy).     

Influence of the activation temperature on structural and textural properties of NiMo/Al2O3 hydrodesulfurization catalysts

Investigations of a commercial NiMo/Al₂O₃ hydrodesulfurization (HDS) catalyst are directed towards optimization of the activation procedure of HDS catalyst concerning active phase formation and thermal stability. Structural and textural data obtained with XRD, IR-FTIR, XPS and LTNA reveal that the optimal temperature for the formation of active species on the catalyst surface and an appropriate pore structure is 300°C.     

Electron Probe Microanalysis of HfO2 Thin Films on Conductive and Insulating Substrates

Quantitative electron probe microanalysis of highly insulating materials is a complicated problem, partially solved by coating samples with grounded thin conductive layers or using novel scanning electron microscopy (SEM) techniques, such as low-voltage and/or variable pressure SEM. In this work, some problems of quantitative X-ray microanalysis of thin HfO₂ films, in particular the possibility to determine mass thickness correlated to the density of the layer material, are discussed. For comparison, Al₂O₃, Ta₂O₅ and TiO₂ films grown onto both semiconductive Si and insulating quartz substrates were also analysed. All the films studied were synthesized by atomic layer deposition method.     

Microwave-assisted "libraries from libraries" approach toward the synthesis of allyl- and C-cyclopropylalkylamides

Cascade reactions of internal and terminal alkynes, zirconocene hydrochloride, dimethylzinc, and phosphinoyl imines (prepared in one step from aldehydes and diphenylphosphinoyl amide) lead to allylic phosphinoyl amides after aqueous workup. Microwave acceleration allows the completion of this one-pot reaction sequence in 10 min. These allylic amides can be converted into a variety of derivatives, including carbamates and sulfonamides, or reacted prior to workup with diiodomethane to give novel C-cyclopropylalkylamides. A solution-phase "libraries from libraries" approach was used to generate an intermediate 20-member library which was subsequently expanded to a 100-member library by a series of N-functionalizations. The biological activity was evaluated in an assay for competitive binding to the estrogen receptor (ERalpha), revealing three potent lead compounds of a new structural type.     

Metal-catalyzed di-tert-butylsilylene transfer: synthesis and reactivity of silacyclopropanes

Metal-catalyzed di-tert-butylsilylene transfer was developed as a mild, operationally simple, functional-group-tolerant method for silacyclopropane formation. Di-tert-butylsilylene was transferred from cyclohexene silacyclopropane 1 to an alkene through the use of a metal salt. Silacyclopropanation occurred at temperatures as low as -27 degrees C when AgOTf or AgOC(O)CF(3) were used as catalysts. Complex silacyclopropanes were formed stereospecifically and diastereoselectively from functionalized alkenes. Silacyclopropanes reacted with various carbonyl compounds, including aldehydes, ketones, formate esters, and formamides, in an overall process that efficiently converts alkenes into oxasilacyclopentanes with defined stereochemistry.     

Cobalt(II) Chloride Complex Formation in Acetamide–Calcium Nitrate Tetrahydrate Melts

The absorption spectra of Co(II) chloride complexes, containing variable concentrations of chloride ligand, in a molten mixture of 80 mol% acetamide–20 mol% calcium nitrate tetrahydrate, were studied at 313, 333, 353, and 363 K, in the wavelength range 400-800 nm. The melt contains three possible ligands (CH₃CONH₂, H₂O, and NO₃ ^-) for competition with added chloride ligand. Addition of chloride caused a shift of the absorption maximum of octahedral cobalt(II) nitrate towards lower energies and pronounced changes in the shape of the initial spectrum of cobalt(II) nitrate. The effect of temperature changes on the molar absorption coefficient of the Co(II) species was dependent on the chloride concentration and was attributed to the structural changes occurring in the cobalt(II) species. The STAR and STAR FA programs were applied to identify the complex ionic species and to calculate the stability constants of Co(II) complexes formed in this solvent. The results indicate the highest probability of formation of the following complex species: Co(NO₃)₄ ^2-, Co(NO₃)₂Cl₂ ^2-, and CoCl₄ ^2-. Stability constants of each complex were presented for the equilibria occurring at 313, 333, 353, and 363 K. Distribution of the Co(II) species was also calculated over the ranges of chloride concentration and temperature investigated.