Crystal structure of m-nitrobenzoic anhydride

The title compound (C₁₄H₈N₂O₇,M _r =306.2) crystallizes in the orthorhombic space group Pbca witha=6.962(1).b=24.688(1), andc=15.890(1)Å,V=2731.0 ų,D _x =1.489 g·cm^–3 forZ=8,=0.98 mm^–1,F(000)=1296,T=293 K. FinalR=0.053 for 1873 observed reflections. The structure was solved by direct methods. Approximately planar molecules lie perpendicular to the [100] direction and show partial stacking. The structure is the first example of a symmetric anhydride which does not retain the symmetry in the crystal state. The two independent nitro groups twist out of the ring planes by 10.5 and 14.8°, respectively.     

A route for bulk separation of semiconducting from metallic single-wall carbon nanotubes

Substantial separation of single-wall carbon nanotubes (SWNTs) according to type (metallic versus semiconducting) has been achieved for HiPco and laser-ablated SWNTs. We presently argue that stable dispersions of SWNTs with octadecylamine (ODA) in tetrahydrofuran (THF) originate from the physisorption and organization of ODA along the SWNT sidewalls in addition to the originally proposed zwitterion model. Furthermore, the reported affinity of amine groups for semiconducting SWNTs, as opposed to their metallic counterparts, contributes additional stability to the physisorbed ODA. This provides a venue for the selective precipitation of metallic SWNTs upon increasing dispersion concentration, as indicated by Raman investigations.     

Nondissociative chemisorption of short chain alkanethiols on Au(111)

The adsorption of methanethiol and n-propanethiol on the Au(111) surface has been studied by temperature-programmed desorption (TPD), Auger electron spectroscopy (AES), and low-temperature scanning tunneling microscopy (LT-STM). Methanethiol desorbs molecularly from the chemisorbed monolayer at temperatures below 220 K in three overlapping desorption processes. No evidence for S-H or C-S bond cleavage has been found on the basis of three types of observations: (1) A mixture of chemisorbed CH3SD and CD3SH does not yield CD3SD, (2) no sulfur remains after desorption, and (3) no residual surface species remain when the adsorbed layer is heated to 300 K as measured by STM. On the other hand, when defects are introduced on the surface by ion bombardment, the desorption temperature of CH3SH is extended to 300 K and a small amount of dimethyl disulfide is observed to desorb at 410 K, indicating that S-H bond scission occurs on defect sites on Au(111) followed by dimerization of CH3S(a) species. Propanethiol also adsorbs nondissociatively on the Au(111) surface and desorbs from the surface below 250 K.     

Divergent coordination mode of magnesium and zinc alkyls supported by the bifunctional pyrrolylaldiminato ligand

The first magnesium and zinc alkyls derived from N-(iso-propyl)-pyrrolylaldimine have been synthesised and structurally characterised: both tBuM(N,N')-type compounds exist as three-coordinate monomers in benzene solution, but in the solid state the magnesium complex is a centrosymmetric dimer with Mg2(mu-N)2 bridges, whereas the zinc complex is a Zn...pi bonded dimer with a pi-coordinated pyrrole unit.     

INFLUENCE OF ELECTRIC FIELDS ON FLUORESCENCE QUENCHING OF CHLOROPHYLL a IN NEMATIC LIQUID CRYSTAL MATRIX

Abstract— An electric field enhances the yield of fluorescence of chlorophyll in a liquid crystal solvent. The presented data suggest that the electric field effect is caused by the decrease in the efficiency of fluorescence quenching by ions. Quenching of each polarized component of fluorescence of chlorophyll molecules oriented by the liquid crystal matrix is different. The relative increase in fluorescence yield due to the applied electric field is stronger for a fluorescence component polarized parallel to the direction of liquid crystal orientation than for the perpendicular component.     

Novel carbohydrate-appended metal complexes for potential use in molecular imaging

Seven discrete sugar-pendant diamines were complexed to the {M(CO)(3)}(+) ((99m)Tc/Re) core: 1,3-diamino-2-propyl beta-D-glucopyranoside (L(1)), 1,3-diamino-2-propyl beta-D-xylopyranoside (L(2)), 1,3-diamino-2-propyl alpha-D-mannopyranoside (L(3)), 1,3-diamino-2-propyl alpha-D-galactopyranoside (L(4)), 1,3-diamino-2-propyl beta-D-galactopyranoside (L(5)), 1,3-diamino-2-propyl beta-(alpha-D-glucopyranosyl-(1,4)-D-glucopyranoside) (L(6)), and bis(aminomethyl)bis[(beta-D-glucopyranosyloxy)methyl]methane (L(7)). The Re complexes [Re(L(1)-L(7))(Br)(CO)(3)] were characterized by (1)H and (13)C 1D/2D NMR spectroscopy which confirmed the pendant nature of the carbohydrate moieties in solution. Additional characterization was provided by IR spectroscopy, elemental analysis, and mass spectrometry. Two analogues, [Re(L(2))(CO)(3)Br] and [Re(L(3))(CO)(3)Br], were characterized in the solid state by X-ray crystallography and represent the first reported structures of Re organometallic carbohydrate compounds. Conductivity measurements in H(2)O established that the complexes exist as [Re(L(1)-L(7))(H(2)O)(CO)(3)]Br in aqueous conditions. Radiolabelling of L(1)-L(7) with [(99m)Tc(H(2)O)(3)(CO)(3)](+) afforded in high yield compounds of identical character to the Re analogues. The radiolabelled compounds were determined to exhibit high in vitro stability towards ligand exchange in the presence of an excess of either cysteine or histidine over a 24 h period.     

The psuedo‐michael reaction of 2‐aminoimidazolines 2. Part 1. Synthesis and structure assignment of isomeric 5(1H)‐Oxo and 7(1H)‐Oxo‐2,3‐dihydroimidazo[1,2‐a]pyrimidine‐6‐carboxylates

The pseudo‐Michael reaction of 1‐aryl‐2‐aminoimidazolines‐2 with diethyl ethoxymethylenemalonate (DEEM) was investigated. Extensive structural studies were performed to confirm the reaction course. For derivatives with N1 aromatic substituents, it was found that the reaction course was temperature dependent. When the reaction temperature was held at ?10 °C only the formation of 1‐aryl‐7(1H)‐oxo‐2,3‐dihydroimi‐dazo[1,2‐a]pyrimidine‐6‐carboxylates ( 4 ) was observed in contrast to earlier suggestions. Under the room temperature conditions, the same reaction yielded mixtures, with varying ratio, of isomeric 1‐aryl‐7(1H)‐oxo‐ ( 4a‐4f ) and 1‐aryl‐5(1H)‐oxo‐2,3‐dihydroimidazo[1,2‐a]pyrimidine‐6‐carboxylates ( 5a‐5f ). The molecular structure of selected isomers, 4b and 5c , was confirmed by X‐ray crystallography. Frontal chro‐matography with delivery from the edge was applied for the separation of the isomeric esters. The isomer ratio of the reaction products depended on the character of the substituents on the phenyl ring. The 1‐aryl‐7(1H)‐oxo‐carboxylates ( 4a‐4f ) were preferably when the phenyl ring contained H, 4‐CH₃, 4‐OCH₃ and 3,4‐Cl₂ substituents. Chloro substitution at either position 3 or 4 in the phenyl ring favored the formation of isomers 5a‐5f . The isomer ratios were confirmed both by ¹H NMR and chromatography. The reaction of the respective hydrobromides of 1‐aryl‐2‐aminoimidazoline‐2 with DEEM, in the presence of triethylamine, gave selectively 5(1H)‐oxo‐esters ( 5a‐5f ).     

X-ray and Thermal Analysis of Selected Drugs Containing Acetaminophen

Studies carried out by X-ray and thermal analysis confirmed that acetaminophen (paracetamol), declared by the manufacturers as an Active Pharmaceutical Ingredient (API), was present in all studied medicinal drugs. Positions of diffraction lines (2θ angles) of the studied drugs were consistent with standards for acetaminophen, available in the ICDD PDF database Release 2008. |Δ2θ| values were lower than 0.2°, confirming the authenticity of the studied drugs. Also, the values of interplanar distances d_hkl for the examined samples were consistent with those present in the ICDD. Presence of acetaminophen crystalising in the monoclinic system (form I) was confirmed. Various line intensities for API were observed in the obtained diffraction patterns, indicating presence of the preferred orientation of the crystallites in the examined samples. Thermal analysis of the studied substances confirmed the results obtained by X-ray analysis. Drugs containing only acetaminophen as an API have melting point close to that of pure acetaminophen. It was found that presence of other active and auxiliary substances affected the shapes and positions of endothermal peaks significantly. A broadening of endothermal peaks and their shift towards lower temperatures were observed accompanying an increase in the contents of additional substances being “impurities” in relation to the API. The results obtained by a combination of the two methods, X-ray powder diffraction (XRPD) and differential scanning calorimetry/thermogravimetry (DSC/TGA), may be useful in determination of abnormalities which can occur in pharmaceutical preparations, e.g., for distinguishing original drugs and forged products, detection of the presence of a proper polymorphic form or too low content of the active substance in the investigated drug.     

Diastereoselective assembling of 21-C-alkylated nickel(II) complexes of inverted porphyrin on a platinum(II) template

Reaction of 21-C-methyl and 21-C-benzyl nickel(II) complexes of inverted meso-tetratolylporphyrin with platinum(II) dichloride or its bis(benzonitrile) complex yields a chloroplatinum(II) species containing two nickel(II) carbaporphyrinoids in a cis arrangement. One of the carbaporphyrinoids coordinates to the platinum ion with the external nitrogen while the other is bound with the external nitrogen and one ortho-carbon of the adjacent meso-aryl ring. The reaction is highly chemoselective. (1)H and (13)C NMR experiments in solution show the diastereoselectivity of the reaction. Single-crystal X-ray data confirm the presence of the diastereomer with opposite configurations of the Ni(II)-coordinated carbons in the subunits of the dimer. Cyclovoltammetric measurements reveal an anodic shift of the nickel(II) oxidation potentials of dimers with respect to those of the parent monomers and two different reduction couples. Reaction of unsubstituted inverted porphyrin with Pt(PhCN)(2)Cl(2) in chlorobenzene yields a monomeric platinum(II) complex of inverted porphyrin. This complex displays a markedly upfield (195)Pt NMR shift compared to tetraphenylporphyrinatoplatinum(II). Under strongly basic conditions deprotonation of the external nitrogen of inverted porphyrin and both electrochemical and chemical oxidation of platinum(II) center are observed.     

The influence of pH on phosphatidylcholine monolayer at the air/aqueous solution interface

The measurements of the interfacial tension at the air/aqueous subphase interface as the function of pH were performed. The interfacial tension of the air–aqueous subphase interface was divided into contributions of individuals. A simple model of the influence of pH on the phosphatidylcholine monolayer at the air/hydrophobic chains of phosphatidylcholine is presented. The contributions of additive phosphatidylcholine forms (both interfacial tension values and molecular area values) depend on pH. The interfacial tension values and the molecular areas values for LH⁺, LOH⁻ forms of phosphatidylcholine were calculated. The assumed model was verified experimentally.