Experimental investigation on heat transfer behavior of the novel ternary eutectic PCM embedded with MWCNT for thermal energy storage systems

Journal of Thermal Analysis and Calorimetry - In this paper, the variation of thermophysical properties such as the thermal conductivity, thermal energy storage capacity, viscosity, and phase...     

Generation of 0.2-TW 5.5-fs optical pulses at 1 kHz using a differentially pumped hollow-fiber chirped-mirror compressor

Optical pulses with 1.1-mJ energy and 5.5-fs duration have been generated at 1-kHz repetition rate from a chirped pulse amplification Ti:Sapphire laser incorporating a differentially pumped hollow-fiber chirped-mirror compressor. The effects of self-focusing and multi-photon ionization during the beam propagation were minimized by differentially pumping the hollow fiber filled with neon. The spectral broadening at the hollow-fiber compressor was optimized by adjusting gas pressure, laser intensity, and laser chirp, covering from 540 nm to 950 nm. PACS 42.65.Jx; 42.65.Re     

Synthesis and antimycobacterial activity of some beta-carboline alkaloids

In view of the attributed medicinal properties of beta-carboline alkaloids, some new O-acyl derivatives of beta-carboline alkaloid--harmol, were prepared and tested for possible antimycobacterial activity against Mycobacterium tuberculosis H37Rv.     

A sensitive and rapid liquid chromatography tandem mass spectrometry method for quantitative determination of 7-ethyl-10-hydroxycamptothecin (SN-38) in human plasma containing liposome-based SN-38 (LE-SN38)

7-Ethyl-10-hydroxycamptothecin (SN-38) is an active metabolite of Irinotecan (CPT-11), an anticancer pro-drug. To support clinical pharmacokinetic studies for liposome based formulation of SN-38 (LE-SN38) in cancer patients, a rapid, simple and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed and validated for the quantification of total SN-38 in human plasma. Sample preparation was carried out by one-step protein precipitation using cold acetonitrile with 0.5% acetic acid (v/v). Camptothecin was used as an internal standard (IS). Chromatographic separation of SN-38 and IS was achieved using a Synergi Hydro-RP column (C(18), 50 x 2 mm, 4 micro m), with a gradient elution of acetonitrile and 0.1% acetic acid. After ionization in electrospray source (positive ions), the acquisition was performed in the multiple reactions monitoring mode. Quantitation was accomplished using the precursor-->product ion combinations of m/z 393.1-->349.2 for SN-38 and 349.1-->305.1 for IS. The quantification limit of 0.05 ng/mL was achieved by using much lower volume (0.2 mL) of plasma and in the presence of LE-SN38. The method was validated over the concentration range of 0.05-400 ng/mL. Accuracy was within +/-12% of nominal at all concentration levels. Inter-day and intra-day precisions expressed as percentage coefficient of variation (%CVs) for quality control (QC) samples were less than 14 and 5%, respectively.     

Solvent‐assisted anionic ring opening polymerization of glycidol: Toward medium and high molecular weight hyperbranched polyglycerols

Hyperbranched polyglycerols (HPGs) are globular structures with a large number of functionalizable hydroxyl groups and have excellent in vitro and in vivo biocompatibility profiles comparable to polyethylene glycol. This work introduces a facile method for the synthesis of medium molecular weights (M_ws) (50–300 kDa) HPGs, which has been difficult to synthesize with low polydispersity, with the assistance of solvents by ring opening polymerization. The influence of different solvents (1,4‐dioxane, tetrahydropyran (THP), ethylene glycol diethyl ether (EGDE) and decane), solvent to glycidol ratio, concentration of glycidol and the time of polymerization on M_w and polydispersity of HPGs has been studied. The M_w and polydispersity of HPGs are significantly affected by the nature of the polymerization phase (homogeneous or heterogeneous) and chemical structure of the solvent. The differences in the solvation of the potassium cations and change in the nucleophilicity of the alkoxide anion in various solvents may be responsible for the changes in M_w and PDI of the HPG. The M_w of the HPG decreases in the order 1,4‐dioxane > THP > EGDE >decane. The microstructure, solution and thermal properties of the HPG do not depend on the nature of solvent. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2614–2621     

Apparent Solubility of Ibuprofen in Dimethyl Dodecyl Ammonium-Propane Sulfonate, DDAPS, Micelles, DDAPS/Butanol Mixtures and in Oil-in-Water Microemulsions Stabilized by DDAPS

Solubility of drugs in aqueous media is a real issue for scientists and a lot of work is going on to resolve the issue. The same is the case for ibuprofen, which is a derivative of propionic acid, belongs to the NSAIDs family and has low solubility in pure water. Therefore, its solubility has been investigated in dimethyl dodecyl ammonium-propane sulfonate, DDAPS, micellar solution, DDAPS/butanol mixtures and in various (hexane, decane and tetradecane) oil-in-water microemulsions to find out a suitable vehicle. The aggregation number, size and flow ability of micelles and microemulsions were estimated using refractive index, viscosity and light scattering measurements. It has been observed that these microemulsions have a higher ability to solubilize ibuprofen than DDAPS/butanol mixtures or DDAPS micelles.     

Synthesis and Characterization of Novel Biodegradable Di‐ and Tri‐Block Copolymers Based on Ethylene Carbonate Polymer as Hydrophobic Segment

Synthesis of novel amphiphilic biodegradable block copolymers based on ethylene carbonate is reported in this study. Polyethylene glycol monomethyl ether (MeO‐PEO) and polyethylene glycol (PEG) of varying molar masses are used as macro‐initiator for ring‐opening polymerization of ethylene carbonate in the presence of sodium stannate trihydrate as a heterogeneous transesterification catalyst. Earlier elution of block copolymer from macro‐initiator in size exclusion chromatography (SEC) indicated the successful synthesis of the block copolymers. Ratios of both types of blocks are varied systematically. Liquid chromatography at critical conditions is used for the analysis of the non‐critical individual blocks, and if there are any critical segments that are not attached to the non‐critical block. To the best of our knowledge, this is the first report on the synthesis of ethylene carbonate‐based amphiphilic block copolymers. Chromatographic critical conditions of the ethylene carbonate polymer are also reported for the first time. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1887–1893