A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

Modeling of radiative heat transfer in an axisymmetric cylindrical enclosure with participating medium

Radiative heat transfer in an axisymmetric enclosure with absorbing, emitting, and scattering medium is studied here by using the different methods such as MDOM, FVM, and MFVM with emphasis on the treatment of angular derivative term, which appears in curvilinear coordinates due to angular redistribution. After final discretization equation for MFVM is introduced by using the step scheme and directional weights, the present approach is validated by applying it to three different benchmarking problems with absorbing, emitting, and scattering medium. All of the results presented here support its accuracy as well as moderate efficiency. Finally, the present approaches are applied to a truncated cone-shaped enclosure as a body-fitted geometry case.     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

An ultraviolet-curable mold for sub-100-nm lithography

We describe a novel UV-curable mold that is stiff enough for replicating dense sub-100-nm features even with a high aspect ratio. It also allows for flexibility when the mold is prepared on a flexible support such that large area replication can be accomplished. The composite material of the mold is inert to chemicals and solvents. The surface energy is made low with a small amount of releasing agent such that the mold can be removed easily and cleanly after patterning. In addition, the material allows self-replication of the mold. These unique features of the mold material should make the mold quite useful for various patterning purposes.     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.     

Effect of changing electrophilic center from C=O to C=S on rates and mechanism: pyridinolyses of O-2,4-dinitrophenyl thionobenzoate and its oxygen analogue

Second-order rate constants have been measured spectrophotometrically for the reactions of O-2,4-dinitrophenyl thionobenzoate (1) and 2,4-dinitrophenyl benzoate (2) with a series of substituted pyridines in 80 mol % H(2)O/20 mol % DMSO at 25.0 +/- 0.1 degrees C. The Br?nsted-type plots obtained are nonlinear with beta(1) = 0.26, beta(2) = 1.07, and pK(a) degrees = 7.5 for the reactions of 1 and beta(1) = 0.40, beta(2) = 0.90, and pK(a) degrees = 9.5 for the reactions of 2, suggesting that the pyridinolyses of 1 and 2 proceed through a zwiterionic tetrahedral intermediate T(+/-) with a change in the rate-determining step at pK(a) degrees = 7.5 and 9.5, respectively. The thiono ester 1 is more reactive than its oxygen analogue 2 except for the reaction with the strongest basic pyridine studied (pK(a) = 11.30). The k(1) value is larger for the reactions of 1 than for those of 2 in the low pK(a) region, but the difference in the k(1) value becomes negligible with increasing the basicity of pyridines. On the other hand, 1 exhibits slightly larger k(2)/k(-1) ratio than 2 in the low pK(a) region but the difference in the k(2)/k(-1) ratio becomes more significant with increasing the basicity of pyridines. Pyridines are more reactive than alicyclic secondary amines of similar basicity toward 2 in the pK(a) above ca. 7.2 but less reactive in the pK(a) below ca. 7.2. The k(1) value is slightly larger, but the k(2)/k(-1) ratio is much smaller for the reactions of 2 with pyridines than with isobasic secondary amines in the low pK(a) region, which is responsible for the fact that the weakly basic pyridines are less reactive than isobasic secondary amines.     

Interleukin-1beta stimulates matrix metalloproteinase-2 expression via a prostaglandin E2-dependent mechanism in human chondrocytes

IL-1beta is known promote cyclooxygenase-2 (COX- 2) and matrix metalloproteinase-2 (MMP-2) expression. This study focuses on the characterization of the signaling cascade associated with IL-1beta-induced matrix metalloproteinase-2 (MMP-2) regulation in human chondrocytes. The decrease in collagen levels in the conditioned media was prevented by a broad spectrum MMP inhibitor, suggesting that IL-1beta promotes the proteolytic process leading to MMP-2 activation. IL-1beta-related MMP-2 expression was found to be dependent on prostaglandin E2 (PGE2) production. In addition, the induction of COX-2 and MMP-2 was inhibited by the pretreatment of chondrocytes with a SB203580 or Ro 31-8220, indicating the involvement of protein kinase C (PKC) or p38 mitogen-activated protein kinase (MAPK). However, there is no cross-talk between PKC and p38 MAPK in the IL-1beta-induced MMP-2 activation. Taken together, these results demonstrated that IL-1beta induces MMP-2 expression through the PGE2-dependent mechanism in human chondrocytes.     

Highly stereoselective and efficient total synthesis of (+)-laurencin

A highly stereoselective and efficient asymmetric total synthesis of (+)-laurencin (1) has been accomplished from the known oxazolidinone 5 in 15 steps. The route features an efficient internal alkylation to form oxocene 3 from 4 and a novel use of acetonitrile anion as a two-carbon acetaldehyde equivalent for direct synthesis of ketone 2 from alpha-alkoxy amide 3.     

Photocatalytic decomposition of orange II over TiO2-loaded on SBA-15 prepared using a microwave process

SBA-15 mesoporous material was prepared by microwave-hydrothermal method and was used as support in TiO₂-loaded SBA-15 photocatalysts. The physical properties of these particles were investigated. We also examined the activity of these samples as photocatalysts for the decomposition of orange II. Titania loaded on a silica matrix decreases the surface area of the support as expected for TiO₂ incorporation. For TiO₂-loaded SBA-15 photocatalysts, the IR absorption at ∼960 cm⁻¹ commonly accepted as the characteristic vibration of the Ti-O-Si bond. The photocatalytic activity increases with an increase of the TiO₂ loading.