Additive Results for Moore-Penrose Inverse of Lambert Conditional Operators

Analysis Mathematica - In this paper, we discuss measure theoretic characterizations for Moore-Penrose inverse of Lambert conditional operators, denoted by (MwEMu)?, in some operator classes...     

Optimization of profenofos organophosphorus pesticide degradation by zero-valent bimetallic nanoparticles using response surface methodology

This study synthesized bimetallic Fe/Ni nanoparticles and used them for catalytic degradation of profenofos, an organophosphorus pesticide. This novel bimetallic catalyst (Fe/Ni) was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray analysis spectroscopy (EDAX) and X-ray diffraction (XRD). The bimetallic nano-catalyst was prepared at diameters of 20–50 nm and was shown to effectively degrade profenofos. A three-factor central composite design combined with response surface methodology was used to maximize profenofos removal using the bimetallic system. A quadratic model was built to predict degradation efficiency. ANOVA was used to determine the significance of the variables and interactions between them. Good correlation between the experimental and predicted values was confirmed by the high F-value (16.38), very low P-value (<0.0001), non-significant lack of fit, an appropriate coefficient of determination (R² = 0.936) and adequate precision (14.75). The highest removal rate attained was 94.51%.     

Preconcentration of mercury(II) using a thiol-functionalized metal-organic framework nanocomposite as a sorbent

A novel type of porous metal-organic framework (MOF) was obtained from thiol-modified silica nanoparticles and the copper(II) complex of trimesic acid. It is shown that this nanocomposite is well suitable for the preconcentration of Hg(II) ions. The nanocomposite was characterized by Fourier transfer infrared spectroscopy, X-ray powder diffraction, energy-dispersive X-ray diffraction and scanning electron microscopy. The effects of pH value, sorption time, elution time, the volume and concentration of eluent were investigated. Equilibrium isotherms were studied, and four models were applied to analyze the equilibrium adsorption data. The results revealed that the adsorption process obeyed the Langmuir model. The maximum monolayer capacity and the Langmuir constant are 210 mg g^?1 and 0.273 L mg^?1, respectively. The new MOF-based nanocomposite is shown to be an efficient and selective sorbent for Hg(II). Under the optimal conditions, the limit of detection is 20 pg mL^?1 of Hg(II), and the relative standard deviation is <7.2 % (for n?=?3). The sorbent was successfully applied to the rapid extraction of Hg(II) ions from fish, sediment, and water samples.

Mathematical modeling and numerical simulation of CO2 transport through hollow-fiber membranes

Chemical absorption of carbon dioxide was studied theoretically using hollow-fiber membrane contactors in this work. A 2D mathematical model was developed to study CO₂ transport through hollow-fiber membrane contactors. The model considers axial and radial diffusion in the membrane contactor. It also considers convection in the tube and shell side with chemical reaction. The finite element method (FEM) was used to solve the model equations. Modeling predictions were validated with the experimental data obtained from literature for CO₂ absorption in amine aqueous solutions as solvent. The modeling predictions were in good agreement with the experimental data for different values of gas and liquid velocities. The liquid solvents considered for this study include aqueous solutions of monoethanolamine (MEA), diethanolamine (DEA), N-methyldiethanolamine (MDEA), 2-amino-2-methyl-1-propanol (AMP) and potassium carbonate (K₂CO₃). The simulation results indicated that amine aqueous solutions were better than K₂CO₃ aqueous solution for CO₂ absorption. Also simulation results revealed that the removal of CO₂ with aqueous solution of MEA was the highest among the amines solvents. The hollow-fiber membrane contactors showed a great potential in the area of CO₂ absorption.     

Water treatment: functional nanomaterials and applications from adsorption to photodegradation

Global efforts for engineering desired materials which are able to treat the water sources still are ongoing in the bench level methods. Considering adsorbent and photocatalytic materials as the main reliable candidates still are encountering with struggles because of many challenges that restrict their large-scale application. This review comprehensively considered the recent advanced materials water treatment methods which involve to magnetic, activated carbon, carbon nanotubes (CNTs), graphene (G), graphene oxide (GO), (Graphene) quantum dots, carbon nanorods, carbon nano-onions, and reduced graphene oxide (RGO), zeolite, silica and clay-based nanomaterials. The adsorption and photocatalytic properties of these nanomaterials introduced them as highly potent option for heavy metal ions and organic dyes removal and photocatalytic degradation. High specific surface area in conjugation with presenting higher kinetics of adsorption and decomposition are the main characteristics of these materials which make them appropriate to treat wastewater even in ultralow concentration of the pollutants. Considering the mechanistic aspects of the adsorption and photocatalytic decomposition process, challenges and opportunities were other subjects that have been highlighted for the discussed nanomaterials. In term of the adsorption approaches, the mechanism of adsorptions and their influence on the maximum adsorption capacity were discussed and also for photocatalyst approach the radical active spices and their role in kinetic and efficiency of the organic pollutant decomposition were provided a deep discussion.     

Synthesis of 5-[(2-hydroxynaphthalen-1-yl)diazenyl]isophthalic acid and its application to electrocatalytic oxidation and determination of adrenaline,paracetamol, and tryptophan

In this study,Au nanoparticles/poly 5-[(2-hydroxynaphthalen-l-yl)diazenyl]isophthalic acid film modified glassy carbon electrode(AuNPs/poly(NDI)/GCE) has shown excellent electrocatalytic activity toward the oxidation of adrenaline(ADR),paracetamol(PAC),and tryptophan(Trp).The bare glassy carbon electrode(GCE) fails to separate the oxidation peak potentials of these molecules,while the poly(NDI) film modified electrode can resolve them.Electrochemical impedance spectroscopy(EIS)indicates that the charge transfer resistance of the bare electrode decreases as 5-[(2-hydroxynaphthalen-l-yl)diazenyl]isophthalic acid is electropolymerized on the bare electrode.Furthermore,EIS exhibits enhancement of electron transfer kinetics between analytes and the electrode after electrodeposition of Au nanoparticles.Differential pulse voltammetry results show that the electrocatalytic current increases linearly in the ranges of 0.01-680.0 μmol L~1 for ADR,0.05-498.0 μmol L~1 for PAC,and 3.0-632.0 μmol L~1 for Trp;with detection limits(S/N = 3) of 0.009 μmol L~1,0.005 μmol L~1,and 0.09 μmol L~1 for ADR,PAC,and Trp,respectively.The proposed method has been successfully applied for simultaneous determination of ADR,PAC,and Trp in biological samples.     

Measurement of photoneutron doses in and out of high-energy X-ray beam of a SATURNE-20 medical linear accelerator by ECE polycarbonate detectors

Photoneutron contaminations in and out of high energy X-ray beams of the medical linear accelerator SATURNE 20 (CGR) of the Radiotherapy Department of Omeed Hospital in Isfahan, Iran, have been determined using 250 μm polycarbonate (PC) dosimeters, in strips or in sheets, processed by electrochemical etching (ECE) using specially designed ECE chambers to etch larger sheets. A two dimensional or topographical distribution of neutron contamination was also determined in a full size beam. The neutron dose equivalents (Hn) in the beam of 18 MV X-rays at 80 cm FSD were determined to be linear functions of X-ray dose equivalents (Hx) up to 1400 cSv. The distribution of the Hn at different X-ray doses showed bell-shape profiles with maxima at the isocenter. The ratios of dose equivalents of neutrons to those of X-rays increased as the field size increased having values of 0.22%, 0.28%, 0.31% and 0.37% for field sizes of 10×10, 20×20, 30×30, and 40×40 cm² respectively. Although such neutron dose equivalents can be corrected for patient treatment, it can cause radiation protection problems for workers where the design of the facility is not well planned.     

Solid phase extraction of Cd(II) and Pb(II) using a magnetic metal-organic framework, and their determination by FAAS

We describe a novel magnetic metal-organic framework (MOF) for the preconcentration of Cd(II) and Pb(II) ions. The MOF was prepared from the Fe₃O₄-pyridine conjugate and the copper(II) complex of trimesic acid. The MOF was characterized by IR spectroscopy, elemental analysis, SEM and XRD. A Box-Behnken design through response surface methodology and experimental design was used to identify the optimal parameters for preconcentration. Extraction time, amount of magnetic MOF and pH value were found to be critical factors for uptake, while type, volume, concentration of eluent, and elution time are critical in the elution step. The ions were then determined by FAAS. The limits of detection are 0.2 and 1.1 μg?L^?1 for Cd(II), and Pb(II) ions, respectively, relative standard deviations are <4.5% (for five replicates at 50 μg?L^?1 of Cd(II) and Pb(II) ions), and the enrichment capacity of the MOF is at around 190 mg?g^?1 for both ions which is higher than the conventional Fe3O4-pyridine material. The magnetic MOF was successfully applied to the rapid extraction of trace quantities of Cd(II) and Pb(II) ions in fish, sediment, and water samples.