Dielectric and optical properties of polymer-liquid crystal composite

Dielectric properties of polymer-liquid crystal mixture, having constituent polymer, poly-butyl methacrylate (PBMA) and liquid crystal, cholesteryl nonanoate, are reported as a function of frequency and temperature. The measurement has been done in a temperature range of 300-375 K and frequency range of 100 Hz-10 MHz. The dielectric permittivity and dielectric loss shows significant changes with the addition of polymer molecules in liquid crystal. The significant feature of composite formation is that the pure liquid crystal and polymer do not show dielectric relaxation in the frequency range covered, while the composite shows relaxation peak at a particular frequency. The optical transmittance of pure liquid crystal and composite has also been measured and compared.     

A numerical and experimental investigation of the interactions between a non‐uniform planar array of incompressible free jets

The interaction between multiple incompressible air jets has been studied numerically and experimentally. The numerical predictions have been first validated using experimental data for a single jet configuration. The spreading features of five unequal jets in the configuration of one larger central jet surrounded by four smaller equi‐distant jets, have been studied, for different lateral spacing ratios of 1.5, 2.0 and 2.5 and a central jet Reynolds number of 1.24×105 (corresponding to a Mach number of 0.16). Flow of five equal jets has also been simulated, for the sake of comparison. The jet interactions commence at an axial distance of about 3–4 diameters and complete by an axial distance of about 10 diameters for the lowest spacing ratio of 1.5. For larger spacing ratios, the length required for the start and completion of jet interaction increase. Peripheral jets bend more towards the central jet and merge at a smaller distance, when their sizes are smaller than that of the central jet. The entrainment ratio for multiple jets is higher than that for a single jet. Excellent agreement is observed between the experimental data and theoretical predictions for both mean flow field and turbulent quantities, at regions away from the jet inlet. The potential core length and initial jet development, however, are not predicted very accurately due to differences in the assumed and actual velocity profiles at the jet inlet. Copyright © 2004 John Wiley & Sons, Ltd.     

Conductivity and dielectric properties of sol–gel derived porous zirconia

The 8-mol percentage Y₂O₃-stabilized Porous Zirconia was prepared using sol–gel method. Zirconium oxalate gel was prepared by the addition of appropriate amount of oxalic acid solution into the 1 M aqueous solution of zirconium-oxy chloride. A cubic phase zirconia powder was obtained by calcination and milling of the zirconium oxalate gel. Crystallization temperature was found about 450 °C from the Differential thermal analysis. The phase analysis by X-ray diffraction shows the presence of cubic phase. Pellets sintered at 1,350 °C were highly porous, and the electrical conductivity was found with lower value due to the porosity, and the hardness was about 8.0 GPa. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Charge distribution study in the alpha-particle induced fission of232Th+ effect of excitation energy

The fractional cumulative yields of¹³⁵I,¹³⁸Xe and¹⁴⁰Ba in the particle (30 MeV) induced fission of²³²Th have been determined following the growth and decay of^135gXe,^138gCs and¹⁴⁰La, respectively, employing high resolution gamma ray spectroscopy. The fractional cumulative yield values are 0.766±0.02, 0.813±0.03 and 0.991±0.004, respectively. The analysis of the data indicates a broader width of charge distribution () compared to the normally observed =0.56±0.06 for thermal neutron fission of²³⁵U.     

Thermodynamic properties of electrolyte solutions: An EMF study of the activity coefficients of KCl in the system KCl−KNO3−H2O at 25, 35 and 45°C

Electromotive force measurements were carried out on the system KCl–KNO₃–H₂O at constant total ionic strengths of 0.5, 1.0, 2.0 and 3.0 mol-kg^–1 and at 25, 35 and 45°C using a cell consisting of a potassium ionselective electrode and a Ag/AgCl electrode. The Harned coefficients and the Pitzer binary and ternary interaction parameters for the system have been evaluated at each temperature. The osmotic coefficients, excess free energies of mixing and heats of mixing of the system have been predicted at each of the experimental temperatures and ionic strengths. The solubility data at 25°C are also interpreted.     

Studies on the chemical syntheses and on the characteristics of polyaniline derivatives

Syntheses of parent polyaniline and methyl, methoxy, and ethoxy ortho-substituted polyanilines were performed using the conventional chemical methodology and monitored using the new open-circuit-potential (V_oc) profile technique. The intermediate pernigraniline oxidation state was identified and isolated at the V_oc maximum (A) during the conventional chemical synthesis of poly(o-methoxyaniline) in the emeraldine oxidation state. The introduction of the substituent on the aniline ring leads to longer polymerization times and lower V_oc values. Syntheses in the presence of two different monomers in solution were also investigated and showed preferential polymerization of the monomer with the lowest V_oc potential. All polymers produced were characterized by elemental analysis, gel permeation chromatography, UV-VIS spectroscopy, and cyclic voltammetry. The influence of the substituent on the V_oc profile and on the polymer characteristics are rationalized in terms of steric and electronic effects. © 1995 John Wiley & Sons, Inc.